beams parts!!

[MANDALAY]

if you have the alternator in the MR2 position you are going to have to put the MR2 crankshaft pulley on 4 rib x 2 . Also have to blank off the water outlet. Either a plate bolted to it or get the OEM bracket $$$$$$$$$$$

[te51levin]

Originally Posted by psuPbikeRider88

So im using the mr2 crank pulley and the 43 size altenator, so I need whatever belt that goes with that set-up.

I don't know what "43 size" means on the alternator. A part number from it would probably be best.

Originally Posted by psuPbikeRider88

Also, if I could, Id like to get some of the little plastic clip things that you screw all the interior parts in with.

Ah, yes, those things. There are five different styles, and Toyota does not tell us what goes where. You will need to match them up visually. I took some pics and posted them in another thread to make this is easy as possible: MkII interior panel retainers - part numbers & pics inside!

Originally Posted by psuPbikeRider88

Thanks for the patience!

No worries. Swapping and modifying is not always easy.

[psuPbikeRider88]

I already switched the crank pulley to the mr2 one. Luckily for me, my old motor was origionally an mr2 motor, so i have that little block off peice for the water port. The p/n for the altenator is 27060-74430. As for the clips, im not really sure which ones I need... mostly the ones that are used for the door panel. I'll have to get back to you on that. Thanks

[te51levin]

Originally Posted by psuPbikeRider88

The p/n for the altenator is 27060-74430.

Ah. So your car was originally an automatic NA. Here's the belt:

90916-02341-83 - $10.89 - Alternator belt, non-PS

[psuPbikeRider88]

ok, thanks! How do I go about buying one off you?

[te51levin]

Anytime you want to place an order, just give me a call. My phone number is all over the place, but the easiest way to find the 800 number is by looking at the banner ad in my signature or at the top of every page in the Lithia Toyota forum. If you prefer to call my direct line, it is (541)736-3221. We take any major credit card. We do not take PayPal.

[Daemonslayer]

sorry if i have to dig this out fellas.
but i too search the bearing
6204DU2 on that alternator belt idler.
i run a caldina gen4 and it looks same setup like on that image.
greetings from germany
Dan

[te51levin]

Should be 88440-20120. We actually can get that part, since it is shared with US-market Toyotas (1986 through 1993 Celica). Your cost is $25.62 through us.

[Daemonslayer]

hi levin,
are you sure about that partnumber?where is it from?i didnt know this idler bearing is available at toyota as a single piece?
if you can confirm this and dont mind its maybe better for me to ask here for the prices?i just thought i couldnt get it here from Toyota as a single bearing?
how can i contact you.iam not allowed to pm you.
let me know what the shipping costs is for that thing to germany.
but i bet its only some dollars.
regards,
Daniel

[te51levin]

I am pretty confident that the part number is correct. I got it from www.toyodiy.com - they no longer show pictures to US users, but I believe you can still see them since your IP address is outside the US. I can usually identify part numbers there by using the pics on our EPC (dealer catalog) and the list of part numbers they show on the site.

You are welcome to ask for prices on our vendor forum here, but please take a moment to search before you ask in case someone else has already looked for the same thing. Also, you can go to our new site here to get prices once you have part numbers. If the part number won't work on our site it typically means we cannot get the part.

You can contact me via email. That's the best option if you're not using the forum.

Finally, shipping on that bearing would be approximately $15 via US Postal Service Priority Mail.

I'll attach a pic from our EPC showing the idler as installed on an '86 Celica 3S-GE (ST162). Thanks Daniel!

[Daemonslayer]

dang thats some help!
your absolutly correct i can see all images and all partnumbers.and i double checked that stuff with my engines idler part number and it does in fact match.
Whats up with that thing that you cant see them.Is that website blocked?who runs this and is there a risk this is going down?because if someone has to backup this thing!its essential for me and lots of other guys i bet-.i use it all 3 days or so.

so i check some other parts on your website this weekend and will defiently get back to you.
i assume you ship cheap via USPS?

You guys dont have no TRD engine mounts sitting arround waiting on me?
There is no chance to select a st215 in your part numbers list?
but that probably would be ok because i can use lots of gen3 parts.

[te51levin]

Originally Posted by Daemonslayer

dang thats some help!

Not a problem!

Originally Posted by Daemonslayer

Whats up with that thing that you cant see them.Is that website blocked?

Well, Toyota's US division doesn't like the fact that they are showing Toyota's images, I guess. So yeah, they took the images down for US visitors. It's disappointed a lot of people.

Originally Posted by Daemonslayer

who runs this and is there a risk this is going down?

I don't know, and yes, there may be.

Originally Posted by Daemonslayer

i assume you ship cheap via USPS?

We do use USPS for all international shipments. I can't guarantee that it will be cheap, or that the shipping estimator on our site will be accurate, but we do ship as cheap as we can.

Originally Posted by Daemonslayer

You guys dont have no TRD engine mounts sitting arround waiting on me?

For an SW20? We do actually have a set of TRD mounts here. Your cost is $319.23 plus shipping, which would be about $65 or so. I will have to add the part number to our site next week.

Originally Posted by Daemonslayer

There is no chance to select a st215 in your part numbers list?

No sir, unfortunately not. We never got the ST215 in the US, and (also unfortunately) you can't shop by chassis number in our site. It would be very useful, but it is not something the catalog provider supports.

[Daemonslayer]

hi levin,
thanks again for the fast reply.I had my fun yesterday on your site.
its easy to choose stuff there.
got my partnumbers /order togehter yesterday.
will add that TRD mounts too if its all 4 of them an new ones.
or must i create a basket case and you supply me with the TRD mounts partnumbers so i add them?
let me know what i mut do.
i mailes with someone who told me the weight of the box is 14lbs so i see USPS has 41.28 Dollar with priority mail - international madim flat rate box.
maybe my other parts fit in there too.

1x88440-20120 $25.62
2x16535-74080 – $13.69
1x 90105-08040 $0.60
1x 90105-10077 $1.30
3x 90119-12168 $1.50
3x 91651-41022 $1.30
12x 90110-10007 – $1.07
9x90119-06637 – $0.61
2x 90099-04449 – $0.70
2x 90901-19041 – $2.60
1x 90105-10032 – $1.20
1x 90119-14015 – $4.04

[te51levin]

We've just listed the TRD motor mounts on our Auctions page. The link for that is right at the top of the page, under the website's header image. So you are free to bid on that at any time!

We can probably fit those mounts in a USPS large Priority Mail flat rate box, along with the other parts you've listed above, but the mounts will not fit comfortably in the Medium flat rate box.

Whatever you end up buying, we always try to adjust and correct shipping costs for international buyers if we have collected much more than is necessary to ship the parts safely. In other words, if your order comes up with $85 in shipping, and it costs us $55, you'll be getting some of that $85 back before we place the final charge on your credit card. Make sense?

Thanks for your patience while we work out the details!