lithia

[joelito0921]

Hi I have a 1993 Toyota mr2 Turbo and i would like a quote on all the coolant hoses and oil hoses in the engine bay (especially the ones under the turbo if you have a picture diagram that you can email me that will be great).
I would need the shipping cost too. Thank You

Name: Joel Gracia
Zip Code: 02136

[te51levin]

It is Sunday, so I am not at work. I am replying from home for now.

First things first, to replace all the major hoses that carry coolant in the whole car, you will spend well over $300. I've priced it out before...actually I just found an old thread where I listed them elsewhere, so I can copy and paste it here:

16574-74010 - Radiator hose 16573B & 16574 (two req'd)
16572-74140 - Radiator hose 16572
16575-74010 - Radiator hose 16575
16558-74010 - Radiator hose 16558B
16571-74140 - Radiator hose 16571
16576-74010 - Radiator hose 16576
16283-88381 - HFH 16283
16282-88380 - HFHOE 16282
16281-88380 - Bypass hose 16281
16284-88381 - Turbo coolant hose 16284
16285-88380 - Turbo coolant hose 16285
16261-88361 - Bypass hose 16261
16262-74010 - Water inlet hose 16262
16267-88382 - Bypass hose 16267
16264-88383 - Turbo coolant hose 16264
87245-17180 - Heater hose 87246A
87245-17290 - Heater hose 87245E
87245-17300 - Heater hose 87245B
87245-17230 - Heater hose 87245A
87245-17240 - Heater hose 87246B
87208-17080 - Heater hose w/ pipe 87208C
80636-18717 - Aftermarket hose for rubber portion of 87208-17080

Second, there's only one hose on an SW20 that carries oil. It's the one that goes to the front side of the oil pan:
15491-88380 - Hose, turbo oil drain


Next, the pics. There is a really good site, http://www.toyodiy.com/ , where you can see basically all the same pics that we see in our EPC.

EDIT Jan 2010: ToyoDIY has been forced to remove images from their site. Images are no longer visible to users within the United States. You can use the numbers above to look up parts at our website, LithiaToyotaParts.com , or I can attach pictures from the EPC as necessary, or you can still use this site to look things up:
mr2epc

It will show you pretty much everything involved in the cooling system, as well as any other parts on the car. Just be aware that heater hoses are buried in the Electrical catalog, not Engine, so they can be hard to find. You can get pics there, and then just write up the list you want according to your own preferences. This is not a kit - it's all sold individually - so you can just buy whatever you need at this time.


Finally, shipping. Depending on how deep you want to go, you're looking at between $16-22 in shipping charges via UPS Ground.

Thanks!

[joelito0921]

Thank You Aaron.
Ok here it goes. I need
16284
16283
16282
16261
15526A
16325
and can you get me a price on this. On my speed sensor one of the three pins inside the plug broke and my speedo doesn't work. would it be possible just to by the plug cause i now its removable just in case this is my car vin# P0075139. Give me a call so i can pay for the order. Thanks
PS that web site was great help

[te51levin]

16284-88381 - $5.97 - Turbo coolant hose 16284
16283-88381 - $4.36 - HFH 16283
16282-88380 - $13.36 - HFHOE 16282
16261-88361 - $7.35 - Bypass hose 16261
15526-88381 - $2.89 - Gasket, oil line (x2 = $5.78)
16325-62010 - $4.36 - Thermostat

All of the above parts are in stock, and they add up to $41.18; we can ship them via Priority Mail for $6.00 for a total of $47.18 delivered. Everything above is saved as quote number 50231. If you want to place the order, I'll need you to call me with that number when you can. That usually works a lot better than me trying to catch customers.

Now, as for the speed sensor connector on the wiring harness, I don't think we can get one for you. I found a part number for a bare plastic connector housing that does not have any terminals (metal contacts) inside, but that part number is not valid on Toyota's US parts system. I have Toyota working on the problem for me to see if there is a US alternative, and I'll let you know what they say.

[joelito0921]

Ok thank you i'll give you a call in the morning

[te51levin]

Hey Joel, thanks again for the order! I will email you the info about that speed sensor.

[Coronas Finest]

Hey aaron, thanks for pointing me in the right direction!
There is only one hose I can't find the number. And I'm hoping its not sold as a complete unit. The number highlighted in the third picture you attached is 87208c and is highlighted in blue....the only part I need is the hose that comes off the metal pipe and connects under the distributor kinda has a "U" shape to it.
*EDIT* I believe the hose number is 80636-18717


Also if I could get the part number for the clamps for hoses 16571&16576.

As well as the gasket for the housing to the block I believe 16341 and the gasket inbetween the upper and lower part of the housing 16331p.

Thanks, ill be ordering soon as I get those requested PN's

[te51levin]

Originally Posted by Coronas Finest

There is only one hose I can't find the number. And I'm hoping its not sold as a complete unit. The number highlighted in the third picture you attached is 87208c and is highlighted in blue....the only part I need is the hose that comes off the metal pipe and connects under the distributor kinda has a "U" shape to it.
*EDIT* I believe the hose number is 80636-18717

Correct. 87208-17080 is the original part, sold only with the metal pipe, and the price is absolutely unholy. 80636-18717 is the part number we assigned to the aftermarket hose we sell that replaces the rubber portion only. We added that part number to our online database so the website recognizes the part number.

Originally Posted by Coronas Finest

Also if I could get the part number for the clamps for hoses 16571&16576.

90467-34004 is the hose clamp for those two hoses. Toyota calls it a clip...

Originally Posted by Coronas Finest

As well as the gasket for the housing to the block I believe 16341 and the gasket inbetween the upper and lower part of the housing 16331p.

Gasket 16341 is 16341-88381, O-ring 16331P is 90301-40005.

Thanks again!

[Coronas Finest]

Since thatone hose is "aftermarket" you wouldn't happen to stock it would you? Or would I have to wait a while for it to get here?

[te51levin]

We have four of them in stock right now. We try to keep them on hand at all times.

[Coronas Finest]

Is there any other shipping options? I'm ordering it tonight, but I know there's only 2 delivery options. Just wondering if we could do it priority or something to get it here quick without paying ups ricockulous fee? Thanks man you rock!

[te51levin]

Priority mail is feasible. We can (and do) often ship Priority within the cost of Domestic Standard, so you don't have to do anything special.

[Coronas Finest]

Thanks just ordered, tried last night....but for some reason I can never access the site at night.
I owe you big man! Its because you I'm back on the road again!!

[te51levin]

No problem! You should have the hose in a couple of days.