turbo tranny parts

[mr2_mk1.5]

hey Aaron I need a price on some transmission parts for a 91 turbo.
I need
#4 driven gear
all the syncros, stop rings and syncro keys
front and rear output shaft bearings
the nut for output shaft preload(the nut you stake in the 5th gear area)
oil pump o-rings(pickup and output seals)
input shaft seal
differental seals(axle seals)

also just for sh*ts and giggles how much is a limited slip out of a 93+ transmission
thank you matt

[mr2_mk1.5]

also Aaron, I need the preice for the speedo adaptor, the piece that has the gear and the little shaft that connects it to the main speedo, or just the plastic gear and coupler shaft if available seperatley

[te51levin]

Originally Posted by mr2_mk1.5

hey Aaron I need a price on some transmission parts for a 91 turbo.

OK, but I'm not sure what you mean by "stop rings". You're not talking about snap rings, are you?

33422-17020 - $136.88 - 4th gear, driven
33367-20040 - $33.72 - Synchro ring no. 1, 1st gear side
33367-20060 - $33.72 - Synchro ring no. 1, 2nd gear side
33368-20040 - $30.38 - Synchro ring no. 2 (x2 = $60.76)
33369-20010 - $26.90 - Synchro ring no. 3
33365-20050 - $4.82 - Key, synchromesh shifting, no.1 (x3 = $14.46)
33366-20021 - $3.33 - Key, synchromesh shifting, no.2 (x3 = $19.99)
90366-32002 - $77.78 - Bearing, output shaft front
90366-28007 - $60.75 - Bearing, output shaft rear
90179-20012 - $3.82 - Nut, output shaft
96721-19012 - $3.82 - O-ring, for manual transmission oil strainer
90430-09004 - $0.74 - Gasket, for manual transmission oil pump (x2 = $1.48)
90311-30017 - $6.10 - Input shaft seal
90311-40004 - $8.68 - Axle seal, RH
90311-50027 - $12.42 - Axle seal, LH

This is all saved on quote number 51174.

Originally Posted by mr2_mk1.5

also just for sh*ts and giggles how much is a limited slip out of a 93+ transmission?

More than a complete transmission. Not a lot of giggles there by my standards!

Originally Posted by mr2_mk1.5

also Aaron, I need the preice for the speedo adaptor, the piece that has the gear and the little shaft that connects it to the main speedo, or just the plastic gear and coupler shaft if available seperatley

I just quoted those out a little bit ago, actually:
Speedo gear

[mr2_mk1.5]

What I meant by stop rings was the block rings that sit in the center piece of the sleeve assembly the ones the keys sit on, sorry about the confusion.
thanks
matt

also sorry about asking about the speedometer gear again I didn't find it

[devind56]

i have a 92 turbo tranny for sale... second is a bit of a bitch but ran a 500hp motor on it and it holds.... no lsd

[te51levin]

Originally Posted by mr2_mk1.5

What I meant by stop rings was the block rings that sit in the center piece of the sleeve assembly the ones the keys sit on, sorry about the confusion.

Ah, OK. The keys sit in the hubs:

33361-20040 - $100.06 - Hub, transmission clutch, no.1
33362-20H00 - $70.51 - Hub, transmission clutch, no.2

Originally Posted by mr2_mk1.5

also sorry about asking about the speedometer gear again I didn't find it

No worries! It's just easier to refer to the other thread than to start over here.