FS: 1988 Black Supercharged MR2 1400

Aaron · 12-13-2005, 08:50 PM

Ok here's the deal i bought an 88 supercharged mr2 and it was wanting to pop out in 5th so i decided to take it apart. I took the transaxle apart and replaced the :

5th gear drive
1st,2nd,3rd, 4th ,5th syncro rings and springs
1st/3rd Shift rail shafts
Input/output shaft bearings
New shift selector shaft
New Axle seals
All bearings on input and output shafts
New Clutch
New Pressure Plate
Resurfaced Flywheel
New intake mainfold gasket
New Clutch Slave

The car is pretty much in pieces besides the fact the engine/transaxle is in , the clutch slave is bolted up and the a/c compressor is bolted on. The intercooler/afm bolts/cruise control/battery/axles/ suspension/exhuast all need to be bolted on. 5th gear isn't going in like it should but a couple of transmission techs told me sometimes the new snycro rings when not properly lubed can cause problems. Seats are worn out, the rear tie rods are worn out, need new rear tires.

This is your chance to get a good engine and a freshly rebuilt transaxle for only 1400 bucks. Catch is you gotta put it back together. I want this thing gone in a couple days, i'll post pictures tonight. I'm located in Suffolk,Va.

Mister2.2 · 12-13-2005, 09:50 PM

Waiting for pictures...

Aaron · 12-13-2005, 10:42 PM

I'll take some more pictures tomorrow, i couldn't find the camera and i remebered about these ones.

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg(connectors and carpet are back in though.)

Aaron · 12-13-2005, 10:44 PM

Copy and paste!

20incher · 12-23-2005, 12:11 PM

Hmm, pic's still wont work for me

...im also at work though...

EDIT: works now that i'm at home

fastman · 02-04-2007, 10:58 AM

If you want to sell the maf sensor I'm interested e-mail me at mr2toyo@msn.com

ToyotaTechGeek · 02-04-2007, 11:10 AM

wow, holy thread resurrection, batman! also, it doesn't use a MAF. also, the car has been sold for quite some time now.

Irishman N OC · 02-04-2007, 03:49 PM

If the car is sold, shouldn't this be off the site?

HELLO?

canadam · 02-04-2007, 04:23 PM

Why would it be deleted ?

ToyotaTechGeek · 02-04-2007, 05:19 PM

Quote:

Originally Posted by Irishman N OC

If the car is sold, shouldn't this be off the site?

HELLO?

like, wow! i only just met the guy that bought it who i just happened to be in the same heat autocrossing like 2.5 weeks ago.

Aaron · 02-04-2007, 10:38 PM

this thread should be locked, i sold the car over 6 months ago I believe now! I had such a nightmare of an experience with this car!

12-13-2005, 08:50 PM	#1 (permalink)
Aaron Banned Join Date: Feb 2005 Posts: 148 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	FS: 1988 Black Supercharged MR2 1400 Ok here's the deal i bought an 88 supercharged mr2 and it was wanting to pop out in 5th so i decided to take it apart. I took the transaxle apart and replaced the : 5th gear drive 1st,2nd,3rd, 4th ,5th syncro rings and springs 1st/3rd Shift rail shafts Input/output shaft bearings New shift selector shaft New Axle seals All bearings on input and output shafts New Clutch New Pressure Plate Resurfaced Flywheel New intake mainfold gasket New Clutch Slave The car is pretty much in pieces besides the fact the engine/transaxle is in , the clutch slave is bolted up and the a/c compressor is bolted on. The intercooler/afm bolts/cruise control/battery/axles/ suspension/exhuast all need to be bolted on. 5th gear isn't going in like it should but a couple of transmission techs told me sometimes the new snycro rings when not properly lubed can cause problems. Seats are worn out, the rear tie rods are worn out, need new rear tires. This is your chance to get a good engine and a freshly rebuilt transaxle for only 1400 bucks. Catch is you gotta put it back together. I want this thing gone in a couple days, i'll post pictures tonight. I'm located in Suffolk,Va.

12-23-2005, 12:11 PM	#5 (permalink)
20incher fallen angels Join Date: Oct 2005 Location: San Marcos, TX Posts: 394 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (1/100% )	Hmm, pic's still wont work for me ...im also at work though... EDIT: works now that i'm at home Last edited by 20incher; 12-23-2005 at 08:05 PM..

02-04-2007, 04:23 PM	#9 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 10,399 Thanks: 120 Thanked 142 Times in 121 Posts My Google Map iTrader Rating: (34/100% )	Why would it be deleted ? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-13-2005, 09:50 PM	#2 (permalink)
Mister2.2 Cheese it! Join Date: Feb 2005 Posts: 6,561 Thanks: 121 Thanked 115 Times in 99 Posts Blog Entries: 1 My Google Map iTrader Rating: (3/100% )	Waiting for pictures...

12-13-2005, 10:42 PM	#3 (permalink)
Aaron Banned Join Date: Feb 2005 Posts: 148 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	I'll take some more pictures tomorrow, i couldn't find the camera and i remebered about these ones. http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg(connectors and carpet are back in though.)

12-13-2005, 10:44 PM	#4 (permalink)
Aaron Banned Join Date: Feb 2005 Posts: 148 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	Copy and paste!

02-04-2007, 10:58 AM	#6 (permalink)
fastman No Skills Join Date: Jan 2007 Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	If you want to sell the maf sensor I'm interested e-mail me at mr2toyo@msn.com

02-04-2007, 11:10 AM	#7 (permalink)
ToyotaTechGeek resident GEEK! Join Date: Mar 2005 Location: ...boosting mid-corner Posts: 995 Thanks: 14 Thanked 31 Times in 31 Posts My Google Map iTrader Rating: (2/100% )	wow, holy thread resurrection, batman! also, it doesn't use a MAF. also, the car has been sold for quite some time now.

02-04-2007, 03:49 PM	#8 (permalink)
Irishman N OC Born Mechanic Join Date: Apr 2006 Location: Monrovia,CA Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	If the car is sold, shouldn't this be off the site? HELLO?

02-04-2007, 10:38 PM	#11 (permalink)
Aaron Banned Join Date: Feb 2005 Posts: 148 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	this thread should be locked, i sold the car over 6 months ago I believe now! I had such a nightmare of an experience with this car!