switch or something else?

mk15mr2 · 12-13-2008, 12:01 AM

My brights work great but when put into regular mode they don't turn on. The lights do come up but no light comes out. Driving with brights in the city gets me a lot of flashes...and not the good kind. I am thinking it might be the switch but i didn't know if there was a common wire or fuse issue that could cause that.

Thanks

Jackstand Queen · 12-15-2008, 01:04 PM

Two likely problem areas occur to me. Your light switch on the dash could be at fault.

But I think more likely is the turn signal lever off the steering column. This part can become gummed up with dust, oil, dirt and start malfing. You might want to source these two parts, especially the turn signal lever at a junkyard. You could trying cleaning and lubricating the switch mechanism at the end of the signal lever before replacing it. Good luck!

12-13-2008, 12:01 AM	#1 (permalink)
mk15mr2 Some Skills Join Date: Dec 2008 Location: Arizona Posts: 72 Thanks: 18 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	switch or something else? My brights work great but when put into regular mode they don't turn on. The lights do come up but no light comes out. Driving with brights in the city gets me a lot of flashes...and not the good kind. I am thinking it might be the switch but i didn't know if there was a common wire or fuse issue that could cause that. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-15-2008, 01:04 PM	#2 (permalink)
Jackstand Queen Cage Fighter Join Date: May 2008 Posts: 840 Thanks: 75 Thanked 64 Times in 60 Posts iTrader Rating: (1/100% )	Two likely problem areas occur to me. Your light switch on the dash could be at fault. But I think more likely is the turn signal lever off the steering column. This part can become gummed up with dust, oil, dirt and start malfing. You might want to source these two parts, especially the turn signal lever at a junkyard. You could trying cleaning and lubricating the switch mechanism at the end of the signal lever before replacing it. Good luck!