Gear shift boot. - Page 3

Parkins · 04-23-2009, 02:30 PM

I plan on making my own... thinking black leather with blue stitching... should be pretty simple I think, maybe I'll post pics up... and start selling em since they are so sought after... haha

te51levin · 04-24-2009, 02:34 AM

Quote:

Originally Posted by muffinman

What year vehicle is that image from , and does it make any difference?

That's from '87-'89, but '85 and '86 use the same boot.

This is tough, I'm about half tempted to pick one up for my own car...

efx · 04-27-2009, 07:16 PM

Here are the pictures of the boot I ordered from Lithia Toyota last week...Aaron, are you sure this isn't from a tercel? It looks just like the old one I already have and I took that out of a tercel myself, of course that was a few years back, I thought this was going to be like the one on the schematics above. I can still use it, but was a bit bummed out about it because I thought this one was different. Either way I should note that Aaron is a pretty nice guy and very helpful. I just thought you guys may want to see it as well so here's what you get...same part number as on the previous postings. Part# 58808. Take a look at the first page of this thread, you'll see my old one there...does anything look familiar...

It's not a bad thing, I'm just pointing this out. It does work on the car for those that are wondering though.

te51levin · 04-27-2009, 09:01 PM

Nope, that's the AW11 boot. The pic on the EPC is sort of a "representation" more than anything. It's gonna be a little different in the car and may take a little time to soften up and settle in. How does it look installed?

efx · 04-27-2009, 09:03 PM

I haven't installed it yet...but if you look at the first page of this thread you can see the old one I have installed which is the same. And yeah I know, those bad representations! Shame on them...

When I bought my old one it look like the new one so now you know what it will look like when it gets old too. The material is not hard so it won't be stiff or anything when I install this one. I will just be new. I'll post a picture of it installed once I do it. I've just been lazy on the computer and the forums. Procrastinating a bit, I need to read some stuff for school.

muffinman · 04-28-2009, 10:21 AM

Quote:

Originally Posted by efx

I'll post a picture of it installed once I do it.

Are you done yet?
Are you done yet?
Are you done yet?
Are you done yet?

efx · 04-28-2009, 03:49 PM

I have to take all that out again so I need to check out some stores and see if I can find something to put in the middle and get some fiberglass to get that thing fixed. But if I don't I'll go a head and put that in for you guys later.

Quote:

Originally Posted by muffinman

Are you done yet?
Are you done yet?
Are you done yet?
Are you done yet?

muffinman · 04-28-2009, 04:48 PM

Quote:

Originally Posted by efx

I have to take all that out again so I need to check out some stores and see if I can find something to put in the middle and get some fiberglass to get that thing fixed. But if I don't I'll go a head and put that in for you guys later.

SOOOOOOOO........are you done yet?

04-27-2009, 07:16 PM	#43 (permalink)
efx Cage Fighter Join Date: Apr 2009 Location: Los Angeles, CA Posts: 198 Thanks: 0 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	Okay, got my shift boot from Aaron about 10 minutes ago... Here are the pictures of the boot I ordered from Lithia Toyota last week...Aaron, are you sure this isn't from a tercel? It looks just like the old one I already have and I took that out of a tercel myself, of course that was a few years back, I thought this was going to be like the one on the schematics above. I can still use it, but was a bit bummed out about it because I thought this one was different. Either way I should note that Aaron is a pretty nice guy and very helpful. I just thought you guys may want to see it as well so here's what you get...same part number as on the previous postings. Part# 58808. Take a look at the first page of this thread, you'll see my old one there...does anything look familiar... It's not a bad thing, I'm just pointing this out. It does work on the car for those that are wondering though. Attached Thumbnails Last edited by efx; 04-27-2009 at 07:30 PM.

04-27-2009, 09:03 PM	#45 (permalink)
efx Cage Fighter Join Date: Apr 2009 Location: Los Angeles, CA Posts: 198 Thanks: 0 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	No biggie... I haven't installed it yet...but if you look at the first page of this thread you can see the old one I have installed which is the same. And yeah I know, those bad representations! Shame on them... When I bought my old one it look like the new one so now you know what it will look like when it gets old too. The material is not hard so it won't be stiff or anything when I install this one. I will just be new. I'll post a picture of it installed once I do it. I've just been lazy on the computer and the forums. Procrastinating a bit, I need to read some stuff for school. Last edited by efx; 04-27-2009 at 09:09 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-23-2009, 02:30 PM	#41 (permalink)
Parkins No Skills Join Date: Feb 2009 Location: Boulder, CO Posts: 38 Thanks: 1 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (0/0% )	I plan on making my own... thinking black leather with blue stitching... should be pretty simple I think, maybe I'll post pics up... and start selling em since they are so sought after... haha

04-27-2009, 09:01 PM	#44 (permalink)
te51levin Lithia Toyota Parts Join Date: Oct 2005 Location: Oregon Posts: 1,921 Thanks: 33 Thanked 146 Times in 125 Posts My Google Map iTrader Rating: (125/100% )	Nope, that's the AW11 boot. The pic on the EPC is sort of a "representation" more than anything. It's gonna be a little different in the car and may take a little time to soften up and settle in. How does it look installed?