MK1 Parts for the sales!

traintech86 · 06-23-2009, 07:46 PM

So i heard rumors of this heaven called pick and pull and we went there. i just so happened to find an MK1 with alot of kit on it and i am willing to pick and pull the parts that people need from it for monies of course. right now i picked up the center console and the plastic part that covers over the gauges.

what you all might be interested in would be the 2 t-tops that were in almost mint condition! minimal scratches. the only thing was someone put cheapy tint on them and mucked it up. i will leave them on in case anyone wants them but is anyone interested?

T-Tops:

Imageshack - sspx0107.jpg

Imageshack - sspx0108.jpg

Sorry about the blur but they are both in pretty nice shape so if anyone is interested toss me an offer. they are on ebay for like 80bucks each plus 20 for shipping.

Here are some pics i took of the car, if you see anything you like lemme know and if you don't see something it still might be there so bring it up.

Imageshack - sspx0101.jpg

Imageshack - sspx0102.jpg

Imageshack - sspx0103i.jpg

Imageshack - sspx0106.jpg

I will be going back in a few days because i want some more parts off of it, the underskirt in the bumper there, and i want to convert my windows to the crank style so if anyone wants my power setup lemme know. also i might be taking the front right fender if its in good shape. on a side note this thing had the intake in the trunk for some reason and a box in the trunk labeled "engine control" thats the ECU right?

goixoye · 06-24-2009, 06:47 AM

I need the passenger side mirror triangle trim piece (black).

traintech86 · 06-24-2009, 02:23 PM

ill be sure to pick it up for you, it would probly cost 5$ or so plus shipping. i called them today and they said the car won't be there much longer. at this place they recycle them after 28 days and its almost up. if anyone else wants anything i am going within the next 2 hours and will be there ripping it up. if you want anything be sure to call me @ 925 eight five two five seven sicks eight.

stu4u3 · 06-24-2009, 03:59 PM

Good talking to you earlier B. Hopefully you pull all the good stuff off the car, let me know about those 3 parts. Later.

traintech86 · 06-24-2009, 09:36 PM

we swapped the radiator and after a close look, the Junkyard one really isn't too much better then the one i had. enough to justify 20bucks i guess. also i discovered that the stock intake goes through the boot and around the side, right now this guy has a filter coming straigh off the engine. hot air equals bad. would it be better to go with the stock intake or is there something i can do using the cold air channel and the k&n?

Jackstand Queen · 06-25-2009, 10:49 AM

You can do a pretty efficient ram air mod to get the air intake out of the engine bay. Re-route the gas filler tubes from the trunk. Install a side vent where the gas filler was. Plumb that new driver's side air intake to the airfilter attached to the AFM.

This mod has a gigantic drawback. The intake noise which sounds good when you're in the mood for it, will be about a foot and half from your left ear. And it will be LOUD. I did this mod and came very close to regretting doing it due to noise.

goixoye · 06-25-2009, 12:09 PM

Quote:

Originally Posted by traintech86

ill be sure to pick it up for you, it would probly cost 5$ or so plus shipping. i called them today and they said the car won't be there much longer. at this place they recycle them after 28 days and its almost up. if anyone else wants anything i am going within the next 2 hours and will be there ripping it up. if you want anything be sure to call me @ 925 eight five two five seven sicks eight.

Let me know when you have it and how to pay you...Paypal? I'll need a total cost including shipping to Roanoke, VA 24014. Thanks

traintech86 · 06-25-2009, 11:23 PM

sorry, i checked on your piece, the driver side was there but no passenger side. i def wasn't the first to get ahold. i wasn't able to transport the hood or bumper and i almost didn't get the front pass fender i wanted. i dun think i am goin back untill i get the array of projects done that are in front of me. sorry guys. i still have the T-Tops with the crappy tint on them. the kind you put on yourself so it would peel off easily. if anyone is interested make me an offer.

stu4u3 · 06-26-2009, 12:06 PM

Were you able to get the hood and bumper?

traintech86 · 06-26-2009, 05:04 PM

nope, sorry my friend who would have made the bumper possible, bailed on me the last day so i had to get someone to come with me in my car. i was riding with the front fender on my lap lmao

88*mr2 · 07-04-2009, 10:59 PM

hey hows the condition of the driverside door?? not too worried about door dings as long as they arent massive more on the rust side...?

traintech86 · 07-11-2009, 04:30 AM

/bump

these t-tops are still for the sale. any takers?

stu4u3 · 07-13-2009, 10:27 AM

Nevermind, mine are in the same condition.

06-23-2009, 07:46 PM	#1 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,802 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	MK1 Parts for the sales! So i heard rumors of this heaven called pick and pull and we went there. i just so happened to find an MK1 with alot of kit on it and i am willing to pick and pull the parts that people need from it for monies of course. right now i picked up the center console and the plastic part that covers over the gauges. what you all might be interested in would be the 2 t-tops that were in almost mint condition! minimal scratches. the only thing was someone put cheapy tint on them and mucked it up. i will leave them on in case anyone wants them but is anyone interested? T-Tops: Imageshack - sspx0107.jpg Imageshack - sspx0108.jpg Sorry about the blur but they are both in pretty nice shape so if anyone is interested toss me an offer. they are on ebay for like 80bucks each plus 20 for shipping. Here are some pics i took of the car, if you see anything you like lemme know and if you don't see something it still might be there so bring it up. Imageshack - sspx0101.jpg Imageshack - sspx0102.jpg Imageshack - sspx0103i.jpg Imageshack - sspx0106.jpg I will be going back in a few days because i want some more parts off of it, the underskirt in the bumper there, and i want to convert my windows to the crank style so if anyone wants my power setup lemme know. also i might be taking the front right fender if its in good shape. on a side note this thing had the intake in the trunk for some reason and a box in the trunk labeled "engine control" thats the ECU right?

07-13-2009, 10:27 AM	#13 (permalink)
stu4u3 Fixing up a 1989 MR2 MK1 Join Date: Mar 2009 Location: Dallas/Fort Worth Posts: 351 Thanks: 14 Thanked 5 Times in 5 Posts iTrader Rating: (1/100% )	Nevermind, mine are in the same condition. Last edited by stu4u3; 07-13-2009 at 12:26 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.mr2.com/forums/mk-1-mr2-aw11/Toyota-MR2-42770-mk1-parts-sales.html
Posted By	For	Type	Date
dbl_dwn's Bookmarks on Delicious	This thread	Refback	08-03-2009 06:25 PM

06-24-2009, 06:47 AM	#2 (permalink)
goixoye Worthless Join Date: Jun 2008 Location: Roanoke, VA Posts: 133 Thanks: 1 Thanked 7 Times in 7 Posts iTrader Rating: (2/100% )	I need the passenger side mirror triangle trim piece (black).

06-24-2009, 02:23 PM	#3 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,802 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	ill be sure to pick it up for you, it would probly cost 5$ or so plus shipping. i called them today and they said the car won't be there much longer. at this place they recycle them after 28 days and its almost up. if anyone else wants anything i am going within the next 2 hours and will be there ripping it up. if you want anything be sure to call me @ 925 eight five two five seven sicks eight.

06-24-2009, 03:59 PM	#4 (permalink)
stu4u3 Fixing up a 1989 MR2 MK1 Join Date: Mar 2009 Location: Dallas/Fort Worth Posts: 351 Thanks: 14 Thanked 5 Times in 5 Posts iTrader Rating: (1/100% )	Good talking to you earlier B. Hopefully you pull all the good stuff off the car, let me know about those 3 parts. Later.

06-24-2009, 09:36 PM	#5 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,802 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	we swapped the radiator and after a close look, the Junkyard one really isn't too much better then the one i had. enough to justify 20bucks i guess. also i discovered that the stock intake goes through the boot and around the side, right now this guy has a filter coming straigh off the engine. hot air equals bad. would it be better to go with the stock intake or is there something i can do using the cold air channel and the k&n?

06-25-2009, 10:49 AM	#6 (permalink)
Jackstand Queen Cage Fighter Join Date: May 2008 Posts: 840 Thanks: 75 Thanked 64 Times in 60 Posts iTrader Rating: (1/100% )	You can do a pretty efficient ram air mod to get the air intake out of the engine bay. Re-route the gas filler tubes from the trunk. Install a side vent where the gas filler was. Plumb that new driver's side air intake to the airfilter attached to the AFM. This mod has a gigantic drawback. The intake noise which sounds good when you're in the mood for it, will be about a foot and half from your left ear. And it will be LOUD. I did this mod and came very close to regretting doing it due to noise.

06-25-2009, 11:23 PM	#8 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,802 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	sorry, i checked on your piece, the driver side was there but no passenger side. i def wasn't the first to get ahold. i wasn't able to transport the hood or bumper and i almost didn't get the front pass fender i wanted. i dun think i am goin back untill i get the array of projects done that are in front of me. sorry guys. i still have the T-Tops with the crappy tint on them. the kind you put on yourself so it would peel off easily. if anyone is interested make me an offer.

06-26-2009, 12:06 PM	#9 (permalink)
stu4u3 Fixing up a 1989 MR2 MK1 Join Date: Mar 2009 Location: Dallas/Fort Worth Posts: 351 Thanks: 14 Thanked 5 Times in 5 Posts iTrader Rating: (1/100% )	Were you able to get the hood and bumper?

06-26-2009, 05:04 PM	#10 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,802 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	nope, sorry my friend who would have made the bumper possible, bailed on me the last day so i had to get someone to come with me in my car. i was riding with the front fender on my lap lmao

07-04-2009, 10:59 PM	#11 (permalink)
88mr2 mk1 Join Date: Jul 2009 Location: iOWA Posts: 73 Thanks: 12 Thanked 1 Time in 1 Post iTrader Rating: (0/0%* )	hey hows the condition of the driverside door?? not too worried about door dings as long as they arent massive more on the rust side...?

07-11-2009, 04:30 AM	#12 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,802 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	/bump these t-tops are still for the sale. any takers?