custom cold air placement? - Page 2

curvesrgood · 09-02-2009, 01:12 PM

I'm down just out of Charlotte... slightly southeast in the county over from the one Charlotte is in. We've got a shop and I've got a parts building out back and several mr2's in the yard

. Dad has the mk2, I've got several mk1's right now.

traintech86 · 09-02-2009, 02:26 PM

i have a friend who goes there all the time! once i can spare it i might just drive down for a visit

mr3 · 09-07-2009, 02:41 PM

Kinda dead thread revival, I just got my pics uploaded so I threw this up. I dont have a clue why I went with the blue filter. I was going to go with the gray one or the red one when I was driving to the store but when I got there I picked up the blue and bought it. I dont know why and I really dont care because it does the same thing. I still have to come up with a solution for the engine lid. I dont have the coolent overflow in the stock location so that vent is just going to rain right on my alternator and the other on the filter. I have an idea but for now, I'll just cover it up.

traintech86 · 09-07-2009, 04:38 PM

you know if you had some magnetic sheets like fridge magnets you could just cover the holes when you're parked. its not the ideal solution but i think it might work out pretty well. i can't see the pics cause they blocked them but when i get home ill take a look!

mr3 · 09-07-2009, 05:49 PM

The car is stuck sitting under the car port till I can get the parts to make it running and get it going legally. I have a second lid to cut into and weld up so it's just a matter of time before I do something.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-02-2009, 01:12 PM	#21 (permalink)
curvesrgood three mk1's Join Date: Feb 2006 Location: NC Posts: 499 Thanks: 8 Thanked 33 Times in 28 Posts iTrader Rating: (1/100% )	I'm down just out of Charlotte... slightly southeast in the county over from the one Charlotte is in. We've got a shop and I've got a parts building out back and several mr2's in the yard . Dad has the mk2, I've got several mk1's right now.

09-02-2009, 02:26 PM	#22 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,799 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	i have a friend who goes there all the time! once i can spare it i might just drive down for a visit

09-07-2009, 02:41 PM	#23 (permalink)
mr3 unskilled Join Date: Jun 2008 Location: Plymouth Mtg, Pa Posts: 2,406 Thanks: 24 Thanked 98 Times in 93 Posts iTrader Rating: (7/100% )	Kinda dead thread revival, I just got my pics uploaded so I threw this up. I dont have a clue why I went with the blue filter. I was going to go with the gray one or the red one when I was driving to the store but when I got there I picked up the blue and bought it. I dont know why and I really dont care because it does the same thing. I still have to come up with a solution for the engine lid. I dont have the coolent overflow in the stock location so that vent is just going to rain right on my alternator and the other on the filter. I have an idea but for now, I'll just cover it up.

09-07-2009, 04:38 PM	#24 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,799 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	you know if you had some magnetic sheets like fridge magnets you could just cover the holes when you're parked. its not the ideal solution but i think it might work out pretty well. i can't see the pics cause they blocked them but when i get home ill take a look!

09-07-2009, 05:49 PM	#25 (permalink)
mr3 unskilled Join Date: Jun 2008 Location: Plymouth Mtg, Pa Posts: 2,406 Thanks: 24 Thanked 98 Times in 93 Posts iTrader Rating: (7/100% )	The car is stuck sitting under the car port till I can get the parts to make it running and get it going legally. I have a second lid to cut into and weld up so it's just a matter of time before I do something.