Name This Hose!

traintech86 · 10-07-2009, 07:38 PM

i dunno what the hell is up with the tape and zip ties but no, its unacceptable and needs to be replaced haha. also toyotatech, i wanted you to know i am working on that part to connect my stock intake! i have a plastic pvp end that fits inside the one hole, and a hose clamp to make sure it stays in. bought some clamps for the hose itself so we'll see what happens!

espguitarist33 · 10-07-2009, 07:44 PM

that is the oil cooler line

be careful with pvc!...i forget what the temperature is...but at a lower then melting point...it realeases highly noxious gas/vapours out of the plastic...on the outside. not great for use on cars

ToyotaTechGeek · 10-07-2009, 07:58 PM

that pvc might be ok for a temp fix, but go to Lowe's or something to get a 'proper' rubber stopper and use that, some FIPG and that clamp!

traintech86 · 10-07-2009, 08:04 PM

whats fipg? and i will have to look around for that stopper. all i could find was the plastic deal. will it really get that hot?

ToyotaTechGeek · 10-07-2009, 08:14 PM

no, but the rubber stopper is better. you can find it in the hardware isle/drawers. FIPG is Toyota Formed In Place Gasket. yes, you can use regular rtv, but FIPG FTW!!!

espguitarist33 · 10-07-2009, 08:15 PM

well the engine itself runs around 200 (well engines in general are supposed to...give or take i suppose) exhaust is even hotter...my friend was going to run a pvc intake and another possibly intercooler piping but he found a few articles about how bad of an idea that is

traintech86 · 10-07-2009, 08:17 PM

this is to cap off the hole where the intake resinator box thing is sposed to go. ill look for a rubber stopper tho when i go to homes depot next.

10-07-2009, 07:38 PM	#1 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,802 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	Name This Hose! i dunno what the hell is up with the tape and zip ties but no, its unacceptable and needs to be replaced haha. also toyotatech, i wanted you to know i am working on that part to connect my stock intake! i have a plastic pvp end that fits inside the one hole, and a hose clamp to make sure it stays in. bought some clamps for the hose itself so we'll see what happens!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-07-2009, 07:44 PM	#2 (permalink)
espguitarist33 Cage Fighter Join Date: Nov 2008 Location: west chester PA Posts: 528 Thanks: 4 Thanked 7 Times in 7 Posts iTrader Rating: (2/100% )	that is the oil cooler line be careful with pvc!...i forget what the temperature is...but at a lower then melting point...it realeases highly noxious gas/vapours out of the plastic...on the outside. not great for use on cars

10-07-2009, 07:58 PM	#3 (permalink)
ToyotaTechGeek resident GEEK! Join Date: Mar 2005 Location: ...boosting mid-corner Posts: 995 Thanks: 14 Thanked 31 Times in 31 Posts My Google Map iTrader Rating: (2/100% )	that pvc might be ok for a temp fix, but go to Lowe's or something to get a 'proper' rubber stopper and use that, some FIPG and that clamp!

10-07-2009, 08:04 PM	#4 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,802 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	whats fipg? and i will have to look around for that stopper. all i could find was the plastic deal. will it really get that hot?

10-07-2009, 08:14 PM	#5 (permalink)
ToyotaTechGeek resident GEEK! Join Date: Mar 2005 Location: ...boosting mid-corner Posts: 995 Thanks: 14 Thanked 31 Times in 31 Posts My Google Map iTrader Rating: (2/100% )	no, but the rubber stopper is better. you can find it in the hardware isle/drawers. FIPG is Toyota Formed In Place Gasket. yes, you can use regular rtv, but FIPG FTW!!!

10-07-2009, 08:15 PM	#6 (permalink)
espguitarist33 Cage Fighter Join Date: Nov 2008 Location: west chester PA Posts: 528 Thanks: 4 Thanked 7 Times in 7 Posts iTrader Rating: (2/100% )	well the engine itself runs around 200 (well engines in general are supposed to...give or take i suppose) exhaust is even hotter...my friend was going to run a pvc intake and another possibly intercooler piping but he found a few articles about how bad of an idea that is

10-07-2009, 08:17 PM	#7 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,802 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	this is to cap off the hole where the intake resinator box thing is sposed to go. ill look for a rubber stopper tho when i go to homes depot next.