whats it worth - Page 2

dmb_jlv · 11-11-2009, 12:02 PM

Quote:

Originally Posted by YellowJacket

I found a great pic showing the hardware, the visor side with two different sized bolts and grommet and , the ctrim with the two holes:

visor attachment screws photo - aw11mr2 photos at pbase.com

http://i.pbase.com/g3/01/187001/2/54772094.visor.jpg

yea well as in the pics i sent you a lil while ago on the pm.. you can tell that i have the rubber piece at the top but i dont have em for the side.. so i need those too along with the clips and the visor... but we used to have a visor and them one day we were goin down the interstate and it flew off.. ugh so we havent been able to find one since.

YellowJacket · 11-11-2009, 12:07 PM

If you are interested... They dont have the hole for the visor but I have a template you can use to carefully drill them. You would need the longer bolts at the top of the side pieces for the visor.. I dont think I have them but will have to double check... I might.

Wanted: Black Rear Window Trip pieces for an 85' Mk1

dmb_jlv · 11-11-2009, 12:10 PM

Quote:

Originally Posted by YellowJacket

If you are interested... They dont have the hole for the visor but I have a template you can use to carefully drill them. You would need the longer bolts at the top of the side pieces for the visor.. I dont think I have them but will have to double check... I might.

Wanted: Black Rear Window Trip pieces for an 85' Mk1

well i think there are holes in the top under the rubber.. i am pretty sure cause like i said we used to have one... but i know we dont have the clips or the rubber piece for all along the sides

dmb_jlv · 11-11-2009, 12:12 PM

Quote:

Originally Posted by YellowJacket

If you are interested... They dont have the hole for the visor but I have a template you can use to carefully drill them. You would need the longer bolts at the top of the side pieces for the visor.. I dont think I have them but will have to double check... I might.

Wanted: Black Rear Window Trip pieces for an 85' Mk1

oh ok i just re read that lol you meant the parts you have dont have th eholes lol ok.. gotcha.. yea those are pretty but the gloss black i dont think will look good... the other stuff on the car are pretty much black if not close to flat black haha

YellowJacket · 11-11-2009, 12:15 PM

Gloss black is not great... but Its fix-able. You would have to wet sand and then polish and then spray with OEM FLAT BLACK rattle can.... or wait for someone else to sell you a set, or buy new OEM for $456

dmb_jlv · 11-11-2009, 12:16 PM

Quote:

Originally Posted by YellowJacket

Its do-able. You would have to wet sand and then polish and then spray with OEM FLAT BLACK rattle can.... or wait for someone else to sell you a set, or buy new OEM for $456

yea that $456 suggestion is out.. haha definitely... that is what i am wantin is to try to find someone to maybe sell me some.. but idk... doubt anyone really has one

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-11-2009, 12:07 PM	#22 (permalink)
YellowJacket 1985 16v NA 6-speed Join Date: Sep 2008 Location: Nashville, TN Posts: 415 Thanks: 8 Thanked 31 Times in 24 Posts iTrader Rating: (1/100% )	If you are interested... They dont have the hole for the visor but I have a template you can use to carefully drill them. You would need the longer bolts at the top of the side pieces for the visor.. I dont think I have them but will have to double check... I might. Wanted: Black Rear Window Trip pieces for an 85' Mk1

11-11-2009, 12:15 PM	#25 (permalink)
YellowJacket 1985 16v NA 6-speed Join Date: Sep 2008 Location: Nashville, TN Posts: 415 Thanks: 8 Thanked 31 Times in 24 Posts iTrader Rating: (1/100% )	Gloss black is not great... but Its fix-able. You would have to wet sand and then polish and then spray with OEM FLAT BLACK rattle can.... or wait for someone else to sell you a set, or buy new OEM for $456