Lining up the timing marks.

skruyd · 11-05-2009, 12:34 AM

Lining it up with the crank pulley at TDC. Will the marks on the cam gears line up with the marks on the backing plate? Asking because my car is lopping and won't rev past 4500 RPMs. Currently the cam gears are 3 teeth after with the crank pulley at TDC. Just needing an answer without telling a story

Davis · 11-05-2009, 12:35 AM

Yes, at TDC the crank and cams are supposed to be lined up with their marks.

Oh and the T-belt also has it's own marks where it's supposed to line up with the cam and crank when you put it on for the first time.

skruyd · 11-05-2009, 12:50 AM

Sweet, so my timing is off by 30 degrees. Appreciate it......Crap, now I have to fix the dizzy too. Any who, appreciate the answer.

toyotaspeed90 · 11-10-2009, 05:43 PM

keep in mind that TDC is when the crank keyway is sticking straight up in relation to the engine.... not necessarily straight up in the air.... there's also a timing mark (about fingernail width) on the back/top side of the lower timing gear. The upper timing gears have dots that should line up with the markings on the upper timing plate.

Luni · 11-10-2009, 08:54 PM

Crank timing mark is set to 0 TDC. Cams are set to their marks in the cam caps under the valve cover, and ALSO can be referenced against the horizon mark against the head (not the most accurate way, but can work as well)

11-05-2009, 12:34 AM	#1 (permalink)
skruyd 5th Gear Join Date: Sep 2009 Location: Middle TN Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Lining up the timing marks. Lining it up with the crank pulley at TDC. Will the marks on the cam gears line up with the marks on the backing plate? Asking because my car is lopping and won't rev past 4500 RPMs. Currently the cam gears are 3 teeth after with the crank pulley at TDC. Just needing an answer without telling a story

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-05-2009, 12:35 AM	#2 (permalink)
Davis Radical Dreamer Join Date: Nov 2006 Location: Long Beach, California Posts: 4,536 Thanks: 85 Thanked 125 Times in 113 Posts My Google Map iTrader Rating: (7/100% )	Yes, at TDC the crank and cams are supposed to be lined up with their marks. Oh and the T-belt also has it's own marks where it's supposed to line up with the cam and crank when you put it on for the first time.

11-05-2009, 12:50 AM	#3 (permalink)
skruyd 5th Gear Join Date: Sep 2009 Location: Middle TN Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Sweet, so my timing is off by 30 degrees. Appreciate it......Crap, now I have to fix the dizzy too. Any who, appreciate the answer.

11-10-2009, 05:43 PM	#4 (permalink)
toyotaspeed90 No Skills Join Date: Jun 2006 Location: Bellingham, WA Posts: 2,401 Thanks: 0 Thanked 148 Times in 143 Posts My Google Map iTrader Rating: (0/0% )	keep in mind that TDC is when the crank keyway is sticking straight up in relation to the engine.... not necessarily straight up in the air.... there's also a timing mark (about fingernail width) on the back/top side of the lower timing gear. The upper timing gears have dots that should line up with the markings on the upper timing plate.

11-10-2009, 08:54 PM	#5 (permalink)
Luni Cage Fighter Join Date: Oct 2005 Location: Salt Lake City Utah Posts: 3,213 Thanks: 10 Thanked 130 Times in 110 Posts My Google Map iTrader Rating: (8/100% )	Crank timing mark is set to 0 TDC. Cams are set to their marks in the cam caps under the valve cover, and ALSO can be referenced against the horizon mark against the head (not the most accurate way, but can work as well)