Bigger Replacement Supercharger

mr2tim · 09-06-2009, 09:33 AM

Here some pictures of a OEM Toyota 2.4L Supercharger used on the Previa which maybe/could/might be a interesting swap for that tiny SC-12 Toyota sent us on the 1.6L.

Of course this one's for sale

BUT,

how about some discussion/responses on fitting and modding with this? (come on tell us what you know)
a. like could this work on that ugly Mark 2 car?

b. bigger than 100cc injectors needed?
c. do intake and exhaust manifolds differ?
d. pulley sizes?
e. ????????

Jackstand Queen · 10-02-2009, 11:39 AM

I think you should weld on some lower mounts to the case. So that it will fit on an regular SC12 lower mount.

Custom fab upper mounts

Remove the ABV, or run a Bosch ABV.

Custom fab inlet and outlet tubes for the SC

Either bump up the fuel pressure 10 PSI, or intall 440 cc injectors. I have a set laying around.

Don't put on an oversized main pulley, unless you want 14 to 17 PSI.

You might as well install a larger throttle body while your at it.

Get off your Arse Tim . . . . and fab those parts up from the stuff broken dreams are made of.

09-06-2009, 09:33 AM	#1 (permalink)
mr2tim SUPERcharZed ToyZ RacZer Join Date: Mar 2008 Location: South Florida Posts: 1,789 Thanks: 8 Thanked 118 Times in 111 Posts My Google Map iTrader Rating: (6/100% )	Bigger Replacement Supercharger Item Location: South Florida Here some pictures of a OEM Toyota 2.4L Supercharger used on the Previa which maybe/could/might be a interesting swap for that tiny SC-12 Toyota sent us on the 1.6L. Of course this one's for sale BUT, how about some discussion/responses on fitting and modding with this? (come on tell us what you know) a. like could this work on that ugly Mark 2 car? b. bigger than 100cc injectors needed? c. do intake and exhaust manifolds differ? d. pulley sizes? e. ???????? Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-02-2009, 11:39 AM	#2 (permalink)
Jackstand Queen Cage Fighter Join Date: May 2008 Posts: 840 Thanks: 75 Thanked 64 Times in 60 Posts iTrader Rating: (1/100% )	I think you should weld on some lower mounts to the case. So that it will fit on an regular SC12 lower mount. Custom fab upper mounts Remove the ABV, or run a Bosch ABV. Custom fab inlet and outlet tubes for the SC Either bump up the fuel pressure 10 PSI, or intall 440 cc injectors. I have a set laying around. Don't put on an oversized main pulley, unless you want 14 to 17 PSI. You might as well install a larger throttle body while your at it. Get off your Arse Tim . . . . and fab those parts up from the stuff broken dreams are made of.