parts for sale 1986 mr2 5speed

jasenklems · 09-14-2009, 08:59 PM

HI all looking to let go of some parts or the whole car. really looking to just sell parts off of it for now. I have a motor for 200 you pull and a manual trans for 150 you pull local pick up only cash only..... factory body kit minus the front lower valance it was broken so I pitched it, will take 200 for the body kit. most of the interior is good but the dash is trash I will not sell it ( if you want to try to fix the dash and you want to pull it you can have it, that does not include the gauge cluster or the hat over the cluster.) I have a good gas tank with a new fuel pump I will not take less than 200 for that you pull. also have other parts like the glass and doors and front hood and engine lid and trunk lid.....( will let these go for 75.00 each and the glass well the back window is 50 and the windshield for 50. the door glass for 40 each and the small side windows will cost 25 each...........) dont know what would be left but if you need it ask and I will try my best to see if I have it and will let you know I want for it by the way I will think about any reasonable offer so if you think that I want to much please let me know what you are willing to pay....
If you are interested in the whole car I will not take less than 600 cash.. right now i have the whole car it is in peices but it is almost complete ( it is a rebuilt title) and there is no warrenty writen or implyed. you can email me you request at jasenklems@yahoo.com or on the forum. if you ask in this thread please leave me your email address.;.......

jasenklems · 09-14-2009, 09:13 PM

also the car is currently being stored in a garage but not for much longer...

scoobytunerz · 09-14-2009, 09:41 PM

can you post pics up of the body kit....?

jasenklems · 09-14-2009, 11:26 PM

dont really know how but it is just a factory kit oem usa.

scoobytunerz · 09-15-2009, 04:12 PM

could you email me some........?
and what about the back driver side quarter panel.....?

scoobytunerz · 09-15-2009, 04:12 PM

and what about headers....?

jasenklems · 09-15-2009, 09:13 PM

scoobytunerz I think that the driver side quarter panel is ok and I have the factory exhaust manifold. I would take 50 for the quarter and 35 for the header... where are you at in the states

scoobytunerz · 09-15-2009, 10:29 PM

i live in st. louis missouri

jasenklems · 09-16-2009, 07:40 PM

I could probably ship it I will find out what it will cost to ship that quarter cut and the header for you. I think that I will have to ship the quarter cut as truck freight I will ship the header in with the quarter I think. I will have to set up a pay pal first ok.

scoobytunerz · 09-17-2009, 02:10 AM

could you send me ppics before i pay?

jasenklems · 09-17-2009, 09:24 AM

yeah but i dont have a camera just yet so I will see about using my bosses camera.

jasenklems · 09-18-2009, 06:03 PM

sorry sold the car brother picked it up last night

09-14-2009, 08:59 PM	#1 (permalink)
jasenklems Cage Fighter Join Date: Jun 2009 Location: Mt. Healthy Ohio Posts: 139 Thanks: 7 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	parts for sale 1986 mr2 5speed Item Location: middletown ohio HI all looking to let go of some parts or the whole car. really looking to just sell parts off of it for now. I have a motor for 200 you pull and a manual trans for 150 you pull local pick up only cash only..... factory body kit minus the front lower valance it was broken so I pitched it, will take 200 for the body kit. most of the interior is good but the dash is trash I will not sell it ( if you want to try to fix the dash and you want to pull it you can have it, that does not include the gauge cluster or the hat over the cluster.) I have a good gas tank with a new fuel pump I will not take less than 200 for that you pull. also have other parts like the glass and doors and front hood and engine lid and trunk lid.....( will let these go for 75.00 each and the glass well the back window is 50 and the windshield for 50. the door glass for 40 each and the small side windows will cost 25 each...........) dont know what would be left but if you need it ask and I will try my best to see if I have it and will let you know I want for it by the way I will think about any reasonable offer so if you think that I want to much please let me know what you are willing to pay.... If you are interested in the whole car I will not take less than 600 cash.. right now i have the whole car it is in peices but it is almost complete ( it is a rebuilt title) and there is no warrenty writen or implyed. you can email me you request at jasenklems@yahoo.com or on the forum. if you ask in this thread please leave me your email address.;.......

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-14-2009, 09:13 PM	#2 (permalink)
jasenklems Cage Fighter Join Date: Jun 2009 Location: Mt. Healthy Ohio Posts: 139 Thanks: 7 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	also the car is currently being stored in a garage but not for much longer...

09-14-2009, 09:41 PM	#3 (permalink)
scoobytunerz No Skills Join Date: Sep 2009 Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	can you post pics up of the body kit....?

09-14-2009, 11:26 PM	#4 (permalink)
jasenklems Cage Fighter Join Date: Jun 2009 Location: Mt. Healthy Ohio Posts: 139 Thanks: 7 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	dont really know how but it is just a factory kit oem usa.

09-15-2009, 04:12 PM	#5 (permalink)
scoobytunerz No Skills Join Date: Sep 2009 Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	could you email me some........? and what about the back driver side quarter panel.....?

09-15-2009, 04:12 PM	#6 (permalink)
scoobytunerz No Skills Join Date: Sep 2009 Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	and what about headers....?

09-15-2009, 09:13 PM	#7 (permalink)
jasenklems Cage Fighter Join Date: Jun 2009 Location: Mt. Healthy Ohio Posts: 139 Thanks: 7 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	scoobytunerz I think that the driver side quarter panel is ok and I have the factory exhaust manifold. I would take 50 for the quarter and 35 for the header... where are you at in the states

09-15-2009, 10:29 PM	#8 (permalink)
scoobytunerz No Skills Join Date: Sep 2009 Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	i live in st. louis missouri

09-16-2009, 07:40 PM	#9 (permalink)
jasenklems Cage Fighter Join Date: Jun 2009 Location: Mt. Healthy Ohio Posts: 139 Thanks: 7 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	I could probably ship it I will find out what it will cost to ship that quarter cut and the header for you. I think that I will have to ship the quarter cut as truck freight I will ship the header in with the quarter I think. I will have to set up a pay pal first ok.

09-17-2009, 02:10 AM	#10 (permalink)
scoobytunerz No Skills Join Date: Sep 2009 Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	could you send me ppics before i pay?

09-17-2009, 09:24 AM	#11 (permalink)
jasenklems Cage Fighter Join Date: Jun 2009 Location: Mt. Healthy Ohio Posts: 139 Thanks: 7 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	yeah but i dont have a camera just yet so I will see about using my bosses camera.

09-18-2009, 06:03 PM	#12 (permalink)
jasenklems Cage Fighter Join Date: Jun 2009 Location: Mt. Healthy Ohio Posts: 139 Thanks: 7 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	sorry sold the car brother picked it up last night