parting out a 1986 mr2

edtoyota · 10-19-2009, 11:18 AM

I hate to do this , but , my son hit a deer, rightfender and hood are bad , car is in great cond, has good 4age engine and 5 spd trans, , will sell any part you need, but engine and trans must go together, i will not remove it till its sold, you can run and drive car, let me know what you need, interrior is in excellent cond- except for the leather seats, Both doors are like new, power windows , driver side fender is good, , ac parts are all good ,ac worked well, calipers , control arms etc all should be good, still has a good working factory radio,many good parts, this was a well maintained car, let me know what you need and i will take a pic, ed

GrandpaGofast · 10-19-2009, 11:36 AM

Hi Ed,
Sorry 'bout the hit- one of my fears as we have lots of deer here.
looking for a good (no rust) passenger rear qtr panel.
Grandpa

lucky_charms · 10-19-2009, 12:41 PM

how much for the motor and trans

edtoyota · 10-19-2009, 12:49 PM

not looking to get rich off it , how about $400 , complete axles brakes etc ,it runs great, thanks ed

muffinman · 10-19-2009, 12:55 PM

do you have any pics?

edtoyota · 10-19-2009, 12:58 PM

yea, what are you looking for , i will take pics, ( i am off work today) thanks ed

muffinman · 10-19-2009, 12:59 PM

pm sent

como · 10-19-2009, 01:54 PM

If its a moonroof and not a t-top,

I need a bunch of passenger side trim.

Windshield trim, from the quarterpanel to the roof, then straight back, and the parts around the triangle window.

Also, any screws/bolts that hold them in.

Don't need the c-pillar, though!

Also, if the doors both sealed water tight, I'm hoping to get the gasket on the chassis-side for both doors. (you need to remove it to get the windshield part anyway

)

I'm certain I need more, I'll give the car a walk-around tonight. Also, might be buying a car down in the philly area in the coming weeks, any chance I could crash at your place?

I'm from Maine, so its ~8 hours each way. (hoping to find a way down there without driving, for obvious reasons...)

whoops, also gonna need the front trunk release cable, and the rear trunk release cable...

traintech86 · 10-19-2009, 04:45 PM

whats the miles on the engine? i might be interested in the engine + tranny

edtoyota · 10-19-2009, 04:53 PM

mile on it are 186000, but , the guy i bought it from aways used synthetic oil as i do too mobil 1 , engine is in good cond , and has not been beat, I am a 46 year old guy, I always babied it - never abused, you can hear it run, or i could have it out for you when you come, ( if you like I can take compression readings ) clutch is in good shape also....ed

traintech86 · 10-19-2009, 04:56 PM

pm/post some pics, i might be interested and others might as well like some pics >>

lucky_charms · 10-19-2009, 05:57 PM

yeah can u pm me some pics so i could take a look

jasenklems · 10-19-2009, 09:45 PM

hey I need the shifter and brackets and the pedal assembly how much for that.???

edtoyota · 10-20-2009, 08:28 AM

make me an offer - do i need to ship - where are you, , I get pics up today, thanks ed

YellowJacket · 10-22-2009, 01:06 PM

I would be interested in these three C-Pillar trim pieces if they are unbroken and you can get them off without breaking them.

Here is a little explanation on how to install/remove

Free C Pillar Trim Installation Instructions

flybikes1593 · 10-22-2009, 02:58 PM

how much for drivers side door hinges? Are they in good shape any play in them?

edtoyota · 10-22-2009, 08:13 PM

sorry - not to put you guys off , I AM BUYING ANOTHER 86, , i will see what parts i needs rest will be up for grabs end of next week, thanks ed , thanks for all the replys ,

ThomasH · 10-26-2009, 03:34 PM

Looking for this part for my hubby's 86 MR2. He sold his old one 5 years ago and we just bought him another one to replace it. It's missing the rear visor with TOYOTA logo.

Thanks
Leeann

englishmike · 10-28-2009, 09:55 AM

Do you have any of the following? If so please pm me.

An unbroken front spoiler
light switch-knob and rheostat
trunk trim rear (ecu side only)
front trunk trim (top half)
t top shades
t top caps (roof brackets, front and back) uncracked
x1 door bezel uncracked
throttle position sensor 88 SC
front bumper grill with the x2 screw tabs
horn

traintech86 · 10-28-2009, 10:44 AM

Quote:

Originally Posted by ThomasH

Looking for this part for my hubby's 86 MR2. He sold his old one 5 years ago and we just bought him another one to replace it. It's missing the rear visor with TOYOTA logo.

Thanks
Leeann

i have said visor, if interested pm me and ill take some pics for you.

10-19-2009, 11:18 AM	#1 (permalink)
edtoyota edtoyota Join Date: Oct 2009 Location: southern new jersey Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	parting out a 1986 mr2 Item Location: southern nj ( near phila pa) I hate to do this , but , my son hit a deer, rightfender and hood are bad , car is in great cond, has good 4age engine and 5 spd trans, , will sell any part you need, but engine and trans must go together, i will not remove it till its sold, you can run and drive car, let me know what you need, interrior is in excellent cond- except for the leather seats, Both doors are like new, power windows , driver side fender is good, , ac parts are all good ,ac worked well, calipers , control arms etc all should be good, still has a good working factory radio,many good parts, this was a well maintained car, let me know what you need and i will take a pic, ed Last edited by edtoyota; 10-19-2009 at 01:39 PM..

10-19-2009, 01:54 PM	#8 (permalink)
como Road Warrior Join Date: Jan 2009 Location: Southern Maine Posts: 652 Thanks: 13 Thanked 10 Times in 9 Posts iTrader Rating: (2/100% )	If its a moonroof and not a t-top, I need a bunch of passenger side trim. Windshield trim, from the quarterpanel to the roof, then straight back, and the parts around the triangle window. Also, any screws/bolts that hold them in. Don't need the c-pillar, though! Also, if the doors both sealed water tight, I'm hoping to get the gasket on the chassis-side for both doors. (you need to remove it to get the windshield part anyway ) I'm certain I need more, I'll give the car a walk-around tonight. Also, might be buying a car down in the philly area in the coming weeks, any chance I could crash at your place? I'm from Maine, so its ~8 hours each way. (hoping to find a way down there without driving, for obvious reasons...) whoops, also gonna need the front trunk release cable, and the rear trunk release cable... Last edited by como; 10-20-2009 at 09:01 PM..

10-26-2009, 03:34 PM	#18 (permalink)
ThomasH No Skills Join Date: Oct 2009 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Rear Window Visor with TOYOTA logo Looking for this part for my hubby's 86 MR2. He sold his old one 5 years ago and we just bought him another one to replace it. It's missing the rear visor with TOYOTA logo. Thanks Leeann

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-19-2009, 11:36 AM	#2 (permalink)
GrandpaGofast Have tools, will cob it. Join Date: Jul 2009 Location: Mid Atlantic USA Posts: 148 Thanks: 35 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	Hi Ed, Sorry 'bout the hit- one of my fears as we have lots of deer here. looking for a good (no rust) passenger rear qtr panel. Grandpa

10-19-2009, 12:41 PM	#3 (permalink)
lucky_charms custom Join Date: Aug 2009 Location: moving back to tpa fl thank god Posts: 442 Thanks: 10 Thanked 2 Times in 2 Posts My Google Map iTrader Rating: (-1/0% )	how much for the motor and trans

10-19-2009, 12:49 PM	#4 (permalink)
edtoyota edtoyota Join Date: Oct 2009 Location: southern new jersey Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	not looking to get rich off it , how about $400 , complete axles brakes etc ,it runs great, thanks ed

10-19-2009, 12:55 PM	#5 (permalink)
muffinman U-P-G-R-A-Y-E-D-D Join Date: Jan 2008 Location: Sunny South Florida Posts: 5,878 Thanks: 53 Thanked 282 Times in 271 Posts Blog Entries: 1 My Google Map iTrader Rating: (2/100% )	do you have any pics?

10-19-2009, 12:58 PM	#6 (permalink)
edtoyota edtoyota Join Date: Oct 2009 Location: southern new jersey Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	yea, what are you looking for , i will take pics, ( i am off work today) thanks ed

10-19-2009, 12:59 PM	#7 (permalink)
muffinman U-P-G-R-A-Y-E-D-D Join Date: Jan 2008 Location: Sunny South Florida Posts: 5,878 Thanks: 53 Thanked 282 Times in 271 Posts Blog Entries: 1 My Google Map iTrader Rating: (2/100% )	pm sent

10-19-2009, 04:45 PM	#9 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,799 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	whats the miles on the engine? i might be interested in the engine + tranny

10-19-2009, 04:53 PM	#10 (permalink)
edtoyota edtoyota Join Date: Oct 2009 Location: southern new jersey Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	mile on it are 186000, but , the guy i bought it from aways used synthetic oil as i do too mobil 1 , engine is in good cond , and has not been beat, I am a 46 year old guy, I always babied it - never abused, you can hear it run, or i could have it out for you when you come, ( if you like I can take compression readings ) clutch is in good shape also....ed

10-19-2009, 04:56 PM	#11 (permalink)
traintech86 Cage Fighter Join Date: May 2009 Location: Yokosuka, Kanagawa Japan Posts: 1,799 Thanks: 27 Thanked 47 Times in 43 Posts My Google Map iTrader Rating: (3/100% )	pm/post some pics, i might be interested and others might as well like some pics >>

10-19-2009, 05:57 PM	#12 (permalink)
lucky_charms custom Join Date: Aug 2009 Location: moving back to tpa fl thank god Posts: 442 Thanks: 10 Thanked 2 Times in 2 Posts My Google Map iTrader Rating: (-1/0% )	yeah can u pm me some pics so i could take a look

10-19-2009, 09:45 PM	#13 (permalink)
jasenklems Cage Fighter Join Date: Jun 2009 Location: Mt. Healthy Ohio Posts: 139 Thanks: 7 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	hey I need the shifter and brackets and the pedal assembly how much for that.???

10-20-2009, 08:28 AM	#14 (permalink)
edtoyota edtoyota Join Date: Oct 2009 Location: southern new jersey Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	make me an offer - do i need to ship - where are you, , I get pics up today, thanks ed

10-22-2009, 01:06 PM	#15 (permalink)
YellowJacket 1985 16v NA 6-speed Join Date: Sep 2008 Location: Nashville, TN Posts: 415 Thanks: 8 Thanked 31 Times in 24 Posts iTrader Rating: (1/100% )	I would be interested in these three C-Pillar trim pieces if they are unbroken and you can get them off without breaking them. Here is a little explanation on how to install/remove Free C Pillar Trim Installation Instructions

10-22-2009, 02:58 PM	#16 (permalink)
flybikes1593 Cage Fighter Join Date: Jun 2009 Location: Neenah Posts: 126 Thanks: 0 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	how much for drivers side door hinges? Are they in good shape any play in them?

10-22-2009, 08:13 PM	#17 (permalink)
edtoyota edtoyota Join Date: Oct 2009 Location: southern new jersey Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	sorry - not to put you guys off , I AM BUYING ANOTHER 86, , i will see what parts i needs rest will be up for grabs end of next week, thanks ed , thanks for all the replys ,

10-28-2009, 09:55 AM	#19 (permalink)
englishmike Some Skills Join Date: Sep 2009 Location: Birmingham, Alabama Posts: 85 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Do you have any of the following? If so please pm me. An unbroken front spoiler light switch-knob and rheostat trunk trim rear (ecu side only) front trunk trim (top half) t top shades t top caps (roof brackets, front and back) uncracked x1 door bezel uncracked throttle position sensor 88 SC front bumper grill with the x2 screw tabs horn