Need Speedo Assembly / Gear

Adrians89MR2SC · 07-19-2009, 08:43 PM

Anyone have the speedo gear / assembly that goes into the transmission ...

its held in with one 12mm bolt .. dont need the angled piece, just the long piece with the gear and the key to attach it to the angled piece

dont know if it makes any difference but its for a 89 supercharged .. I did buy a new one years ago but ended up putting it in my mk2 turbo a while back then sold the car

email me at adrianmullins@bellsouth.net

Thanks

Jackstand Queen · 08-05-2009, 11:27 AM

I bought the shaft with the plastic cog at the end of it . . . new . . . through a friend who had dealer contacts.

They are not too spendy. . . . you might try Te51 Levin, he works at a dealer parts department in Oregon.

The angled cogs inside the outside piece that bolts on .. . . could be stuck, or gummed up. Run some WD40 and brake cleaner through it followed by oil and agitate with a drill. Mine was frozen solid, but I got it working somehow.

Adrians89MR2SC · 08-05-2009, 09:47 PM

I found everything except the little metal "key" and plastic gear

so I'll just get it from lithia toyota or my local dealer ..

my angled piece was frozen but I got it unfrozen a while back by doing that

07-19-2009, 08:43 PM	#1 (permalink)
Adrians89MR2SC Build,Drive,Sell,Repeat Join Date: Oct 2007 Location: McDonough, Ga Posts: 895 Thanks: 9 Thanked 25 Times in 24 Posts My Google Map iTrader Rating: (1/100% )	Need Speedo Assembly / Gear Anyone have the speedo gear / assembly that goes into the transmission ... its held in with one 12mm bolt .. dont need the angled piece, just the long piece with the gear and the key to attach it to the angled piece dont know if it makes any difference but its for a 89 supercharged .. I did buy a new one years ago but ended up putting it in my mk2 turbo a while back then sold the car email me at adrianmullins@bellsouth.net Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-05-2009, 11:27 AM	#2 (permalink)
Jackstand Queen Cage Fighter Join Date: May 2008 Posts: 840 Thanks: 75 Thanked 64 Times in 60 Posts iTrader Rating: (1/100% )	I bought the shaft with the plastic cog at the end of it . . . new . . . through a friend who had dealer contacts. They are not too spendy. . . . you might try Te51 Levin, he works at a dealer parts department in Oregon. The angled cogs inside the outside piece that bolts on .. . . could be stuck, or gummed up. Run some WD40 and brake cleaner through it followed by oil and agitate with a drill. Mine was frozen solid, but I got it working somehow.

08-05-2009, 09:47 PM	#3 (permalink)
Adrians89MR2SC Build,Drive,Sell,Repeat Join Date: Oct 2007 Location: McDonough, Ga Posts: 895 Thanks: 9 Thanked 25 Times in 24 Posts My Google Map iTrader Rating: (1/100% )	I found everything except the little metal "key" and plastic gear so I'll just get it from lithia toyota or my local dealer .. my angled piece was frozen but I got it unfrozen a while back by doing that