Need help on installing FPR on 5sfe!

Everett · 10-16-2007, 09:05 PM

Im running aftermarket injectors w/ a few mods and my car is running richer than I'd like. I'm guessing that I need to install adj. FPR to cut down the fuel. I already have a Sard FPR, but the thing is when I take the old one off how do I tap into the same hole without the proper bracket? Has anyone done this to a 5s fuel rail??? Any help would be great!

Enthalpy · 10-21-2007, 12:20 AM

Tapping aluminum for a fuel system can leave you with thin walls. Be careful. If it cracks, you will be spraying flamable fluid all over hot metal.

Another thing of which to be aware. Getting bigger injectors and dropping the fuel pressure is the same thing as having the factory injectors, execpt you usually sacrifice atomization.

Why did you get bigger injectors to begin with?

Everett · 10-25-2007, 06:54 PM

well I bought them for another bored out engine I have and figured i'd install them. I've since took them out and replaced them with stock ones. Its runs better now. On the end of my fuel rail there is a metal plug the diameter of the rail. I think i could just tap into that. But then I'd have to plug the existing hole w/ something. I know SARD makes a 3S adapter, would that work on my 5S rail u think?

Gairloch · 10-26-2007, 06:35 AM

The 5s fuel rail is larger diameter than the 3sgte. If that doesn't create complications it should.

scooterman · 12-28-2007, 03:44 PM

you can tap the hole the stock fpr is in i used a 12x1.25 tap works fine.

Sang · 12-28-2007, 06:17 PM

Why don't you find out what size the hole is, use the proper earls adapter and relocate the FPR?

scooterman · 12-28-2007, 06:23 PM

its 11mm unthreaded, the 5sfe regulator is a press in with an o-ring and 2 bolts to hold it down.

it easy just to tap the 11mm hole to 12 x 1.25, then you can put in a fitting

before

after

Sang · 12-28-2007, 06:27 PM

Quote:

Originally Posted by scooterman

its 11mm unthreaded, the 5sfe regulator is a press in with an o-ring and 2 bolts to hold it down.

Nice. Now that I did not know, thanks.

scooterman · 12-28-2007, 06:43 PM

Quote:

Originally Posted by Sang

Nice. Now that I did not know, thanks.

you're welcome

Oteck · 12-28-2007, 07:06 PM

im curious what these small supporting mods are, i doubt it's a turbo. anyways dumping more fuel into a stock setup will not yeild hp, it doesn't work that way.

mrturrari · 01-12-2008, 06:35 PM

Quote:

Originally Posted by Oteck

im curious what these small supporting mods are, i doubt it's a turbo. anyways dumping more fuel into a stock setup will not yeild hp, it doesn't work that way.

True dat. And just for reference I had about everything done to my 5sfe you could do except the cams and I was good on the stock fuel. I had +0.030" bore, +2mm valves, P&P, headers, exhaust, intake and timing at 13 degrees. It wasn't until I upgraded the cams that I needed to add more fuel and then only on the top end.

10-16-2007, 09:05 PM	#1 (permalink)
Everett Lovin' the curves! Join Date: Aug 2006 Location: Decatur,IL/Solomons,MD Posts: 1,434 Thanks: 42 Thanked 65 Times in 59 Posts My Google Map iTrader Rating: (7/100% )	Need help on installing FPR on 5sfe! Im running aftermarket injectors w/ a few mods and my car is running richer than I'd like. I'm guessing that I need to install adj. FPR to cut down the fuel. I already have a Sard FPR, but the thing is when I take the old one off how do I tap into the same hole without the proper bracket? Has anyone done this to a 5s fuel rail??? Any help would be great!

12-28-2007, 07:06 PM	#10 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,945 Thanks: 11 Thanked 172 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	im curious what these small supporting mods are, i doubt it's a turbo. anyways dumping more fuel into a stock setup will not yeild hp, it doesn't work that way. __________________ [Oteck's] Project car Garage Pending Projects 1mz/3mz VVTI Hybrid V6 \| LS430 Big Brakes \| Rotary Climate Control \| Power steering Commander \| Power Tilt & Telescopic Steering Column \| Completed Projects Stainless Door Sills \| Power Folding Mirrors \| Motorized/Steering Fog lamps \| Pedal Conversion \| LED Gauges \| Lexus Door Cover \| Sway bar Relocation Tab \| RFID Push Start

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-21-2007, 12:20 AM	#2 (permalink)
Enthalpy EMS Harmonizer Join Date: Feb 2006 Location: Denver, CO Posts: 1,226 Thanks: 8 Thanked 55 Times in 43 Posts My Google Map iTrader Rating: (2/100% )	Tapping aluminum for a fuel system can leave you with thin walls. Be careful. If it cracks, you will be spraying flamable fluid all over hot metal. Another thing of which to be aware. Getting bigger injectors and dropping the fuel pressure is the same thing as having the factory injectors, execpt you usually sacrifice atomization. Why did you get bigger injectors to begin with?

10-25-2007, 06:54 PM	#3 (permalink)
Everett Lovin' the curves! Join Date: Aug 2006 Location: Decatur,IL/Solomons,MD Posts: 1,434 Thanks: 42 Thanked 65 Times in 59 Posts My Google Map iTrader Rating: (7/100% )	well I bought them for another bored out engine I have and figured i'd install them. I've since took them out and replaced them with stock ones. Its runs better now. On the end of my fuel rail there is a metal plug the diameter of the rail. I think i could just tap into that. But then I'd have to plug the existing hole w/ something. I know SARD makes a 3S adapter, would that work on my 5S rail u think?

10-26-2007, 06:35 AM	#4 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 5,313 Thanks: 139 Thanked 296 Times in 264 Posts Blog Entries: 4 My Google Map iTrader Rating: (7/100% )	The 5s fuel rail is larger diameter than the 3sgte. If that doesn't create complications it should.

12-28-2007, 03:44 PM	#5 (permalink)
scooterman megasquirted 5sfte Join Date: Dec 2007 Location: Northampton, MA Posts: 155 Thanks: 1 Thanked 17 Times in 10 Posts iTrader Rating: (3/100% )	you can tap the hole the stock fpr is in i used a 12x1.25 tap works fine.

12-28-2007, 06:17 PM	#6 (permalink)
Sang Turtle Join Date: Jul 2006 Location: FL Posts: 4,096 Thanks: 18 Thanked 267 Times in 246 Posts iTrader Rating: (5/100% )	Why don't you find out what size the hole is, use the proper earls adapter and relocate the FPR?

12-28-2007, 06:23 PM	#7 (permalink)
scooterman megasquirted 5sfte Join Date: Dec 2007 Location: Northampton, MA Posts: 155 Thanks: 1 Thanked 17 Times in 10 Posts iTrader Rating: (3/100% )	its 11mm unthreaded, the 5sfe regulator is a press in with an o-ring and 2 bolts to hold it down. it easy just to tap the 11mm hole to 12 x 1.25, then you can put in a fitting before after