does anyone have/know what size screw this is>?

mr2v63vz · 11-14-2009, 06:37 PM

the screw that holds the trunk and gas door release latches that bolts the whole assembly to the car.. i cant find it ive tried every screw/bolt i can get my hand on does anyone have an extra one or kno if i can replacec it at home depot/lowes??

te51levin · 11-14-2009, 09:59 PM

Trying to find a used screw or bolt is really doing things the hard way. Home stores are not much easier, since they do not have great metric fastener inventory. If you're going to try to find it somewhere other than a Toyota dealership or auto parts shop, at least go to a decent hardware store rather than a home store, i.e. avoid any place that sells lumber. Ace Hardware, True Value, etc usually have pretty good metric selections.

If all you need is a single fastener, it will be faster and easier to just go to your local dealership and order it. I would be happy to sell you one, but it does not always make sense to make a cross country phone call and pay shipping for nickel and dime orders. If you need a few other things at the same time it works a lot better.

Now, if you are talking about the plastic screw that holds the cover onto the opener assembly, shown as 64607A in the pic below, that's a different story. The part number is 90467-05078-22. Your cost is $6.81 through us, plus shipping, and suggested retail is $8.72.

Maruki-kun · 11-14-2009, 10:15 PM

I have an extra one, but I gotta find it.

mr2v63vz · 11-15-2009, 12:40 AM

i think im talking about part #54607A in that diagram and yea i understand im gonna need other stuff so i can wait and get a few things at once
thanks
un less you find it ku-sama that would be much aprecieted lemme kno what you want for it

Maruki-kun · 11-15-2009, 02:58 AM

Quote:

Originally Posted by mr2v63vz

i think im talking about part #54607A in that diagram and yea i understand im gonna need other stuff so i can wait and get a few things at once
thanks
un less you find it ku-sama that would be much aprecieted lemme kno what you want for it

you are talking about the little screw that you screw in facing the back of the car, not the bottom. right?

If so:
Aaron, look this up and see if it comes up as a screw.
90154-60023

mr2v63vz · 11-15-2009, 05:06 PM

yea it screws into the frame/floorpan and holds the box of latches in place and yes you screw it in towards the back

te51levin · 11-15-2009, 06:31 PM

Quote:

Originally Posted by Ku-sama

Aaron, look this up and see if it comes up as a screw.
90154-60023

Yes, it is. I can tell you from home that it is a bolt without checking the EPC. It's more than likely nothing special - probably 8x1.25mm, maybe 6x1.0mm, and 15-20mm long. Easy to duplicate if you don't have one on hand.

mr2v63vz · 11-15-2009, 07:00 PM

Beautiful you guys are awesome thank you should be easily replacable

11-14-2009, 06:37 PM	#1 (permalink)
mr2v63vz Cage Fighter Join Date: Jul 2009 Location: New windsor,NY Posts: 828 Thanks: 95 Thanked 11 Times in 11 Posts My Google Map iTrader Rating: (7/100% )	does anyone have/know what size screw this is>? the screw that holds the trunk and gas door release latches that bolts the whole assembly to the car.. i cant find it ive tried every screw/bolt i can get my hand on does anyone have an extra one or kno if i can replacec it at home depot/lowes??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-14-2009, 09:59 PM	#2 (permalink)
te51levin LithiaToyotaParts.com Join Date: Oct 2005 Location: Copperhead Road Posts: 3,702 Thanks: 50 Thanked 324 Times in 268 Posts My Google Map iTrader Rating: (193/100% )	Trying to find a used screw or bolt is really doing things the hard way. Home stores are not much easier, since they do not have great metric fastener inventory. If you're going to try to find it somewhere other than a Toyota dealership or auto parts shop, at least go to a decent hardware store rather than a home store, i.e. avoid any place that sells lumber. Ace Hardware, True Value, etc usually have pretty good metric selections. If all you need is a single fastener, it will be faster and easier to just go to your local dealership and order it. I would be happy to sell you one, but it does not always make sense to make a cross country phone call and pay shipping for nickel and dime orders. If you need a few other things at the same time it works a lot better. Now, if you are talking about the plastic screw that holds the cover onto the opener assembly, shown as 64607A in the pic below, that's a different story. The part number is 90467-05078-22. Your cost is $6.81 through us, plus shipping, and suggested retail is $8.72.

11-14-2009, 10:15 PM	#3 (permalink)
Maruki-kun Cage Fighter Join Date: Mar 2008 Location: Millington, MD Posts: 2,487 Thanks: 9 Thanked 74 Times in 67 Posts My Google Map iTrader Rating: (5/100% )	I have an extra one, but I gotta find it.

11-15-2009, 12:40 AM	#4 (permalink)
mr2v63vz Cage Fighter Join Date: Jul 2009 Location: New windsor,NY Posts: 828 Thanks: 95 Thanked 11 Times in 11 Posts My Google Map iTrader Rating: (7/100% )	i think im talking about part #54607A in that diagram and yea i understand im gonna need other stuff so i can wait and get a few things at once thanks un less you find it ku-sama that would be much aprecieted lemme kno what you want for it

11-15-2009, 05:06 PM	#6 (permalink)
mr2v63vz Cage Fighter Join Date: Jul 2009 Location: New windsor,NY Posts: 828 Thanks: 95 Thanked 11 Times in 11 Posts My Google Map iTrader Rating: (7/100% )	yea it screws into the frame/floorpan and holds the box of latches in place and yes you screw it in towards the back

11-15-2009, 07:00 PM	#8 (permalink)
mr2v63vz Cage Fighter Join Date: Jul 2009 Location: New windsor,NY Posts: 828 Thanks: 95 Thanked 11 Times in 11 Posts My Google Map iTrader Rating: (7/100% )	Beautiful you guys are awesome thank you should be easily replacable