![]() |
|
|
|
#61 (permalink) |
|
pimpin' valet ;-)
Join Date: Feb 2005
Location: Atlanta
Posts: 2,135
Thanks: 1
Thanked 37 Times in 34 Posts
|
I love the 91/92 suspension. Since I've swapped over to coilovers its extremely predictable. There is a 180 degree exit ramp where I work and sometimes in the rain the back will kick out, but its extremely smooth and controllable (if you can drive). Sometimes I just give it power and hold the angle. Before this setup I had KYB's and Suspension Technique springs. It was very twitchy and it wasn't easy to regain control once it slid out.
|
|
|
|
|
|
#62 (permalink) | |
|
Dreaming of apexes
Join Date: Aug 2005
Location: Minneapolis, MN
Posts: 4,854
Thanks: 125
Thanked 258 Times in 228 Posts
My Google Map iTrader Rating: (7/100% ) |
Quote:
I'm running: 5* caster up front -1.8* camber all around Zero toe up front and just barely a hint of negative toe in back. I'd have to look to know for sure what it is. I was running zero toe but the car was rotating a bit easier than I wanted it to. Hankook RS-2 235/40-17 in back and 215/40-17 in front. They are a progressive rate spring.
__________________
"Inside the car, the world beyond the driver's immediate horizon ceases to exist. Alone with the solitude of his desire, survival sense numbed by the speed, he's outrun the mediocrity of the outside world, slipped the shackles it tries to clamp on us all. He is running free, chased only by a fear of failure, for failure is to risk ejection into the real world." ~Mark Hughes |
|
|
|
|
|
|
#63 (permalink) | |
|
KaDuWin
|
Quote:
Yeah I feel as though, that back when Toyota did the revisions to the suspension I think that instead of changing the rear toe end linkage, and such, I think if they simply increased the size of the tire width, (14in rims for any car especially a sports like the MR2 was a down right insult never mind a joke) as well as increased the stiffness of the shock, (the black bilsteins that came with the G-Limited later on would have done just fine) put a slightly more aggressive tire on the car, and maybe lower it like they did then they wouldn't have had to go back and make the car ultimately handle worse than it originally was designed to do. Originally Toyota set out to build a production car which would have the handling characteristics of the supercars of the day. And they did it with the first gen MK2. One of the problems was the daily/average driver wasn't prepared for the car, the other problem was that Toyota got the car to react amazingly well; too well even, and they forgot to increase the lateral grip of the car, if they did that the car wouldn't have been nearly as hard for the average driver to control. Take the Noble M12 and M400 basically it was the same idea, minimal understeer ("point and shoot" type of steering reaction) with plenty of lateral grip and that chassis is extremely well behaved while still providing the best handling money can buy at almost any price. Noble M12GTO3/M400 Average=1.165 lateral G. |
|
|
|
|
|
|
#64 (permalink) |
|
Cage Fighter
Join Date: Jun 2007
Location: Lafayette, La
Posts: 162
Thanks: 11
Thanked 15 Times in 7 Posts
My Google Map iTrader Rating: (0/0% ) |
don't know guys
The whole reasoning for this is that I drove my friend's Lotus Elise on the track that I race at. I put about 15 laps on it and it seemed a LOT more responsive to my inputs than my MR2. While I didn't turn near the lap times that I do in the MR2 (way too many variables to list here), the car was just so predictable and correctable (actually thought about trading in the EVO for one).
Anyway, I haven't put much into my suspension yet, other than replacing all the wear items and new bushings and sways, so we will see what happens with the KW Variant 3's. I will leave the 91 geometry for now. BTW I found the exact pictures I needed regarding it by searching on the net. Patrick |
|
|
|
|
|
#65 (permalink) | |
|
KaDuWin
|
Quote:
If I may make a recommendation, the KW Variants are without a dout a step in the right direction if you wonna get your MR2 to handle like the Elise, but don't forget the tires, the Elise is running on very special Yokohoma Advan tires which is one of the stickiest tires you can get, which will account for a lot of the responsiveness. What kind of tires are you using on your MR2? That might solve a lot of your problem. |
|
|
|
|
|
|
#66 (permalink) |
|
Driving MR2s since '89
Join Date: Mar 2006
Location: Santa Barbara
Posts: 329
Thanks: 8
Thanked 21 Times in 20 Posts
My Google Map iTrader Rating: (0/0% ) |
The Elise has much quicker steering ratio than the MK2. By todays sports car standards, the MK2 steering (even the marginally quicker EHPS cars) is very slow. As mentioned above, tires (specifically sidewall flex) affect responsiveness too.
|
|
|
|
|
|
#67 (permalink) | |
|
KaDuWin
|
Quote:
However I have to admit I wouldn't mind a tighter steering ratio, maybe around 2.5-.7 to lock the in my opinion the lower the better but I still want to make sure that the car has a good turning circle, right now the turning circle is amazing. |
|
|
|
|
|
|
#68 (permalink) |
|
NYC hardtop
Join Date: Jan 2006
Location: New York City
Posts: 522
Thanks: 14
Thanked 3 Times in 3 Posts
My Google Map iTrader Rating: (5/100% ) |
i had a 95NA with stock suspension and that thing spun out on me twice! both 180s and once in the middle of a major NYC highway (L.I.E). WTF!
i replaced my suspension after the accident and it wont spin out unless i seriously try to. |
|
|
|
|
|
#69 (permalink) | |
|
KaDuWin
|
Quote:
I eplaced my suspension and upgraded my rim size and tires with all the highest performance stuff I could afford and I now I can't even get my tires to spin, unless it is wet out and I really really give it some gas while the steering wheel is turned. |
|
|
|
|
|
|
#70 (permalink) | |
|
Mad Skillz
Join Date: Jul 2007
Location: Morgantown, WV
Posts: 122
Thanks: 7
Thanked 2 Times in 2 Posts
iTrader Rating: (0/0% ) |
Quote:
Don't let this thread fool you. There is nothing wrong with the 91-92 suspension, provided you spend the $$$ on good tires. I recommend Falken Azenis RT-615's (about $80 each in size 13"). They have worked surprisingly well in wet conditions, too . . . at least so far. ![]() |
|
|
|
|
|
|
#71 (permalink) |
|
No Skills
Join Date: Sep 2005
Location: Omaha, NE
Posts: 64
Thanks: 2
Thanked 4 Times in 4 Posts
iTrader Rating: (1/100% ) |
In my old 91 I could break the back end loose with slight throttle in a turn...
in my current 93, not so easily. Maybe the power difference had something to do with it(ct20b & gen3 on the 91, stock usdm 3sgte with ct26 on the 93). The 91 did seem more "fun" though... it was almost a challenge to drive it at times, whereas the 93 seems to be just "cruising" along. LOL |
|
|
|
|
|
#72 (permalink) |
|
I put the ho in 'hosale
Join Date: Nov 2007
Location: Huntsville, AL
Posts: 444
Thanks: 8
Thanked 14 Times in 11 Posts
iTrader Rating: (2/100% ) |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
LinkBacks (?)
LinkBack to this Thread: http://www.mr2.com/forums/mk-2-mr2/Toyota-MR2-7656-1991-suspension-v-s-1993-suspension-usa-car.html
|
||||
| Posted By | For | Type | Date | |
| Club Toyota MR2 :: Ver tema - SW20 Gen.1 VS Gen.2 REAR SUSPENSION | This thread | Refback | 08-07-2008 03:34 PM | |
| MR2 Owners Club of New Zealand .:. View topic - gen1 and gen2 differences | This thread | Refback | 04-30-2008 09:52 PM | |