PN-Req.: Stainless Door Sills and Associated Interior Trim

canadam · 03-30-2007, 07:42 PM

As stated, looking for P/N's for all 6 pieces (includes actual interior trim, not modifications to USDM pieces).

PCx188 · 02-28-2010, 11:06 PM

bump...anybody?

canadam · 03-01-2010, 12:12 AM

Not sure why I asked for 6 pieces, there's only 4 part numbers. I'll dig them up for you tomorrow, I have them all.

PCx188 · 03-01-2010, 12:40 AM

i just learned that have to hack my old kick plates and somehow weld them together with the JDM plastic panels...i dont think that would look too smooth especially when they start coming apart after a while.

canadam · 03-01-2010, 12:50 AM

It's not a hack job at all. The kick panels are separate pieces from the sills, plastic welded together at the factory. Check my how-to;
http://www.mr2.com/forums/interior-m...-lhd-cars.html

PCx188 · 03-01-2010, 01:29 AM

great write up. but u wouldn't happen to know the part numbers for the RHD sill would you?

canadam · 03-04-2010, 12:11 AM

You bet:

Door Sills:
(1x) 67914-17050-C0
(1x) 67913-17020-C0
Stainless Scuff Plates:
(2x) 67919-17010

PCx188 · 03-04-2010, 01:03 AM

Quote:

Originally Posted by canadam

You bet:

Door Sills:
(1x) 67914-17050-C0
(1x) 67913-17020-C0
Stainless Scuff Plates:
(2x) 67919-17010

that's odd...the first part number doesn't seem to show up anywhere. the second 2 part numbers do. which number is the JDM driver side?

canadam · 03-04-2010, 09:27 AM

I agree that the numbers are odd, but that's what the part number tags have on them, later today I can scan them in for you. Usually left/right parts only differ by one number in the string. Not sure which is left and which is right, all I have left over is the PN stickers, didn't make note of which came out of which.

PCx188 · 03-04-2010, 09:42 AM

ya, no need to scan...i believe u. it just blows that i can't find both sides.

brandonp214 · 03-04-2010, 10:25 AM

67913-17020-C0 is the part number for the right side but i just check part stock status and there is non in the us and non on order, 67919-17010 is listed at an ORNAMENT, DR SCUFF there are a few on these at one of the part depos now and more on order, the first number doesn't pull up in my system

PCx188 · 03-04-2010, 10:35 AM

so did they discontinue one side and not the other?

brandonp214 · 03-04-2010, 10:41 AM

im 100% sure normally when they discont one there is an updated part number which is the replacement. that first part number that doesn't pull in my system just say that is not a good part number it could be just a dig. off or something. looking at it, it looks good. but wont pull any description. Ill look into an see if i can find some instock part numbers for you.

PCx188 · 03-04-2010, 10:59 AM

please do. thank you very much.

canadam · 03-04-2010, 11:00 AM

Quote:

Originally Posted by PCx188

ya, no need to scan...i believe u. it just blows that i can't find both sides.

Probably not available in the US. Mine came from Japan.

PCx188 · 03-04-2010, 11:10 AM

yes, but why would one part number appear in US searches and the other side won't? it just doesn't make sense.

brandonp214 · 03-04-2010, 11:18 AM

i agree i should at least be able to get the part number i may not be able to find any in stock i'll take a look and i'll let you know around 1:30 central.

PCx188 · 03-04-2010, 11:49 AM

ummm no rush at all...thanks.

brandonp214 · 03-04-2010, 02:35 PM

I was able to find out those part numbers are the good part numbers. He is correct. here is a link to a web site that will confirm it the only problem is most of the info is in japanese but you can verify the part numbers in english. ?????? ???????????MR2/???????????MR2 - ?????SNS???????????????

the msrp of the right side is around $70.00 i assume its the same for the other side.

PCx188 · 03-04-2010, 11:31 PM

but regardless...i still cannot buy them using those part numbers.

03-30-2007, 07:42 PM	#1 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 10,399 Thanks: 120 Thanked 142 Times in 121 Posts My Google Map iTrader Rating: (34/100% )	PN-Req.: Stainless Door Sills and Associated Interior Trim As stated, looking for P/N's for all 6 pieces (includes actual interior trim, not modifications to USDM pieces). __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-28-2010, 11:06 PM	#2 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	bump...anybody?

03-01-2010, 12:12 AM	#3 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 10,399 Thanks: 120 Thanked 142 Times in 121 Posts My Google Map iTrader Rating: (34/100% )	Not sure why I asked for 6 pieces, there's only 4 part numbers. I'll dig them up for you tomorrow, I have them all.

03-01-2010, 12:40 AM	#4 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	i just learned that have to hack my old kick plates and somehow weld them together with the JDM plastic panels...i dont think that would look too smooth especially when they start coming apart after a while.

03-01-2010, 12:50 AM	#5 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 10,399 Thanks: 120 Thanked 142 Times in 121 Posts My Google Map iTrader Rating: (34/100% )	It's not a hack job at all. The kick panels are separate pieces from the sills, plastic welded together at the factory. Check my how-to; http://www.mr2.com/forums/interior-m...-lhd-cars.html

03-01-2010, 01:29 AM	#6 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	great write up. but u wouldn't happen to know the part numbers for the RHD sill would you?

03-04-2010, 12:11 AM	#7 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 10,399 Thanks: 120 Thanked 142 Times in 121 Posts My Google Map iTrader Rating: (34/100% )	You bet: Door Sills: (1x) 67914-17050-C0 (1x) 67913-17020-C0 Stainless Scuff Plates: (2x) 67919-17010

03-04-2010, 09:27 AM	#9 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 10,399 Thanks: 120 Thanked 142 Times in 121 Posts My Google Map iTrader Rating: (34/100% )	I agree that the numbers are odd, but that's what the part number tags have on them, later today I can scan them in for you. Usually left/right parts only differ by one number in the string. Not sure which is left and which is right, all I have left over is the PN stickers, didn't make note of which came out of which.

03-04-2010, 09:42 AM	#10 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	ya, no need to scan...i believe u. it just blows that i can't find both sides.

03-04-2010, 10:25 AM	#11 (permalink)
brandonp214 t-ten cert tech Join Date: Mar 2010 Posts: 40 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (0/0% )	67913-17020-C0 is the part number for the right side but i just check part stock status and there is non in the us and non on order, 67919-17010 is listed at an ORNAMENT, DR SCUFF there are a few on these at one of the part depos now and more on order, the first number doesn't pull up in my system

03-04-2010, 10:35 AM	#12 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	so did they discontinue one side and not the other?

03-04-2010, 10:41 AM	#13 (permalink)
brandonp214 t-ten cert tech Join Date: Mar 2010 Posts: 40 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (0/0% )	im 100% sure normally when they discont one there is an updated part number which is the replacement. that first part number that doesn't pull in my system just say that is not a good part number it could be just a dig. off or something. looking at it, it looks good. but wont pull any description. Ill look into an see if i can find some instock part numbers for you.

03-04-2010, 10:59 AM	#14 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	please do. thank you very much.

03-04-2010, 11:10 AM	#16 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	yes, but why would one part number appear in US searches and the other side won't? it just doesn't make sense.

03-04-2010, 11:18 AM	#17 (permalink)
brandonp214 t-ten cert tech Join Date: Mar 2010 Posts: 40 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (0/0% )	i agree i should at least be able to get the part number i may not be able to find any in stock i'll take a look and i'll let you know around 1:30 central.

03-04-2010, 11:49 AM	#18 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	ummm no rush at all...thanks.

03-04-2010, 02:35 PM	#19 (permalink)
brandonp214 t-ten cert tech Join Date: Mar 2010 Posts: 40 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (0/0% )	I was able to find out those part numbers are the good part numbers. He is correct. here is a link to a web site that will confirm it the only problem is most of the info is in japanese but you can verify the part numbers in english. ?????? ???????????MR2/???????????MR2 - ?????SNS??????????????? the msrp of the right side is around $70.00 i assume its the same for the other side.

03-04-2010, 11:31 PM	#20 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	but regardless...i still cannot buy them using those part numbers.