PN-Req: Hose from Slave Clutch Cylinder

biorchang · 09-16-2007, 05:25 PM

Hi all.

I have air getting into the clutch lines and think I have isolated to loose connections on the hose that goes from the slave clutch cylinder to the hard line. The hose is clamped into the screw fittings on either side. Wiggle just a nudge and bubbles between the hose and the fitting...

Anybody know the part #?

94 Turbo.

Oteck · 09-16-2007, 06:07 PM

you can always buy the SS line replacement from chico i think

biorchang · 09-18-2007, 10:35 PM

PN: 90947-02611

Hose, Flexible.

It cost me around $38 from the dealer.

canadam · 09-18-2007, 10:50 PM

That's how much a SS replacement from Chico Raceworks costs, I believe.

Oteck · 09-19-2007, 04:18 AM

$25 shipped actualy

09-16-2007, 05:25 PM	#1 (permalink)
biorchang 94 Turbo Join Date: Mar 2006 Location: Austin, TX Posts: 1,038 Thanks: 16 Thanked 52 Times in 51 Posts iTrader Rating: (9/100% )	PN-Req: Hose from Slave Clutch Cylinder Hi all. I have air getting into the clutch lines and think I have isolated to loose connections on the hose that goes from the slave clutch cylinder to the hard line. The hose is clamped into the screw fittings on either side. Wiggle just a nudge and bubbles between the hose and the fitting... Anybody know the part #? 94 Turbo.

09-18-2007, 10:50 PM	#4 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 9,549 Thanks: 117 Thanked 129 Times in 112 Posts My Google Map iTrader Rating: (29/100% )	That's how much a SS replacement from Chico Raceworks costs, I believe. __________________ WTB ASAP: Black Glove Box Surround - Not the box itself, but the dash plastics it sits in 3SGTE Upper Timing Belt Cover Driver's side seatback - must have bolster and lumbar adjustments, cover condition does not matter - will trade non-adjustable. Genuine Tom's Sides and Rear - replica kits not considered Frunk Plastics - no cracks Mechanical Gauge Cluster - KP/H preferred, but not required. Engine Bay X Brace

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.mr2.com/forums/mk-2-part-numbers/Toyota-MR2-21095-pn-req-hose-slave-clutch-cylinder.html
Posted By	For	Type	Date
Toyota MR2 Message Board	This thread	Refback	09-18-2007 10:50 PM

09-16-2007, 06:07 PM	#2 (permalink)
Oteck RAAAGE! Join Date: Aug 2005 Posts: 2,151 Thanks: 8 Thanked 60 Times in 57 Posts Blog Entries: 2 iTrader Rating: (3/100% )	you can always buy the SS line replacement from chico i think

09-18-2007, 10:35 PM	#3 (permalink)
biorchang 94 Turbo Join Date: Mar 2006 Location: Austin, TX Posts: 1,038 Thanks: 16 Thanked 52 Times in 51 Posts iTrader Rating: (9/100% )	PN: 90947-02611 Hose, Flexible. It cost me around $38 from the dealer.

09-19-2007, 04:18 AM	#5 (permalink)
Oteck RAAAGE! Join Date: Aug 2005 Posts: 2,151 Thanks: 8 Thanked 60 Times in 57 Posts Blog Entries: 2 iTrader Rating: (3/100% )	$25 shipped actualy