Part Number: MkII interior panel retainers - part numbers & pics inside!

te51levin · 05-14-2009, 02:21 PM

Occasionally people contact me looking for interior door panel and kick panel retainers (or clips, if you prefer) for their MkII. This is often a confusing subject because the EPC shows five different retainers used in the interior, but it does not tell us which clip or retainer to use for each panel. They show us cute little line drawings of each part and leave it to us to sort out what we need. The illustrations are not terribly detailed and don't show color, so I ordered one of each and took some pictures here at the dealership. Here they are:

It's not a nut-by-bolt assembly guide, but since we'll never have that, I hope this is helpful. If a mod decides this would be better posted in a different forum, feel free to move it.

Thanks, as always, for your continued support!

Ncturnal · 05-14-2009, 05:58 PM

You rock!

Mark_Dorman · 05-14-2009, 06:11 PM

Thanks Aaron...the only place I knew to get these was PelicanParts.com back in my BMW days. What are the prices on them?

Oteck · 05-14-2009, 09:48 PM

a buck a pop i bet, some expensive plastic. How about numbers for the bolt and cap that holds the door/armrest?

te51levin · 05-19-2009, 07:01 PM

Quote:

Originally Posted by Mark_Dorman

What are the prices on them?

67771-06030 - $1.05 ea.
67771-17020 - $1.03 ea.
67771-33030 - $1.85 ea.
67921-17030 - $0.91 ea.
67921-95501 - $1.24 ea.

Quote:

Originally Posted by Oteck

a buck a pop i bet, some expensive plastic.

Wow, good guesswork there. Very close.

Quote:

Originally Posted by Oteck

How about numbers for the bolt and cap that holds the door/armrest?

You mean the one at the front edge of the door panel, under the end of the dash pad?

90159-40141 - $0.70 - Screw
90339-10002-C0 - $0.87 - Cap

05-14-2009, 02:21 PM	#1 (permalink)
te51levin Lithia Toyota Parts Join Date: Oct 2005 Location: Oregon Posts: 1,885 Thanks: 33 Thanked 144 Times in 123 Posts My Google Map iTrader Rating: (124/100% )	MkII interior panel retainers - part numbers & pics inside! Occasionally people contact me looking for interior door panel and kick panel retainers (or clips, if you prefer) for their MkII. This is often a confusing subject because the EPC shows five different retainers used in the interior, but it does not tell us which clip or retainer to use for each panel. They show us cute little line drawings of each part and leave it to us to sort out what we need. The illustrations are not terribly detailed and don't show color, so I ordered one of each and took some pictures here at the dealership. Here they are: It's not a nut-by-bolt assembly guide, but since we'll never have that, I hope this is helpful. If a mod decides this would be better posted in a different forum, feel free to move it. Thanks, as always, for your continued support! Last edited by te51levin; 05-14-2009 at 02:32 PM.

05-14-2009, 05:58 PM	#2 (permalink)
Ncturnal Google Ron Paul Join Date: Feb 2005 Location: Atlanta, GA Posts: 7,012 Thanks: 93 Thanked 126 Times in 106 Posts Blog Entries: 7 My Google Map iTrader Rating: (33/100% )	You rock! __________________ Brian - My MR2Trader Ads - Click here for order or shipping status if you've bought something from me recently. Technical Questions - Please post them on the forums. Others who may have the same problem don't benefit from a PM exchange. If you wish to have my input I have no problem with a PM containing a link to a thread you have already posted.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-14-2009, 06:11 PM	#3 (permalink)
Mark_Dorman And the V6 swap continues Join Date: Apr 2008 Location: Pasadena, CA Posts: 4,125 Thanks: 73 Thanked 72 Times in 68 Posts Blog Entries: 1 iTrader Rating: (19/100% )	Thanks Aaron...the only place I knew to get these was PelicanParts.com back in my BMW days. What are the prices on them?

05-14-2009, 09:48 PM	#4 (permalink)
Oteck RAAAGE! Join Date: Aug 2005 Posts: 2,112 Thanks: 8 Thanked 60 Times in 57 Posts Blog Entries: 2 iTrader Rating: (3/100% )	a buck a pop i bet, some expensive plastic. How about numbers for the bolt and cap that holds the door/armrest?