PN: MK2 Oil Filter

Ncturnal · 03-19-2006, 09:16 PM

The part number I have for the MK2 Oil Filter is 90915-YZZF1. I order them by the case, and the part number on the case is 90915-YZZA1 with 12 in the box. I believe these are the turbo oil filters, but I use the same filter on the NA as well. The NA filter is slightly smaller in size if I recall correctly. I also change the drain plug washer with each oil change, and that part number is 90430-12031 and comes in a 10 pack.

canadam · 03-21-2006, 08:09 PM

3SGTE Filter should be 90915-YZZA1
5SFE Filter (slightly shorter, same diameter) 90915-YZZA2

Note that these numbers are from Toyota's MVP (Most Valued Products) line. From the factory, your car would have come with a filter 90915-_____ - this is essentially the same unit, but a little more expensive

Not quite sure you have an "F1" number, Brian.

dannn · 03-22-2006, 02:51 PM

90915-YZZF1 superceeded 90915-YZZA1 so its a newer PN

canadam · 03-22-2006, 05:06 PM

Good to know. They're likely just selling old A1 stock on the change-up part number.

N8s93turbo · 04-03-2006, 07:31 PM

i just picked one up today, my pn is - 90915-YZZF2

03-19-2006, 09:16 PM	#1 (permalink)
Ncturnal Google Ron Paul Join Date: Feb 2005 Location: Atlanta, GA Posts: 7,021 Thanks: 93 Thanked 127 Times in 107 Posts Blog Entries: 7 My Google Map iTrader Rating: (33/100% )	PN: MK2 Oil Filter The part number I have for the MK2 Oil Filter is 90915-YZZF1. I order them by the case, and the part number on the case is 90915-YZZA1 with 12 in the box. I believe these are the turbo oil filters, but I use the same filter on the NA as well. The NA filter is slightly smaller in size if I recall correctly. I also change the drain plug washer with each oil change, and that part number is 90430-12031 and comes in a 10 pack. __________________ Brian - My MR2Trader Ads - Click here for order or shipping status if you've bought something from me recently. Technical Questions - Please post them on the forums. Others who may have the same problem don't benefit from a PM exchange. If you wish to have my input I have no problem with a PM containing a link to a thread you have already posted.

03-21-2006, 08:09 PM	#2 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 9,549 Thanks: 117 Thanked 129 Times in 112 Posts My Google Map iTrader Rating: (29/100% )	3SGTE Filter should be 90915-YZZA1 5SFE Filter (slightly shorter, same diameter) 90915-YZZA2 Note that these numbers are from Toyota's MVP (Most Valued Products) line. From the factory, your car would have come with a filter 90915-_____ - this is essentially the same unit, but a little more expensive Not quite sure you have an "F1" number, Brian. __________________ WTB ASAP: Black Glove Box Surround - Not the box itself, but the dash plastics it sits in 3SGTE Upper Timing Belt Cover Driver's side seatback - must have bolster and lumbar adjustments, cover condition does not matter - will trade non-adjustable. Genuine Tom's Sides and Rear - replica kits not considered Frunk Plastics - no cracks Mechanical Gauge Cluster - KP/H preferred, but not required. Engine Bay X Brace

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-22-2006, 02:51 PM	#3 (permalink)
dannn No Skills Join Date: Nov 2005 Posts: 37 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	90915-YZZF1 superceeded 90915-YZZA1 so its a newer PN

03-22-2006, 05:06 PM	#4 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 9,549 Thanks: 117 Thanked 129 Times in 112 Posts My Google Map iTrader Rating: (29/100% )	Good to know. They're likely just selling old A1 stock on the change-up part number.

04-03-2006, 07:31 PM	#5 (permalink)
N8s93turbo TEAM A.S.S. RACING Join Date: Feb 2005 Location: Mississippi/Pennsylvania Posts: 2,473 Thanks: 5 Thanked 26 Times in 17 Posts My Google Map iTrader Rating: (14/100% )	i just picked one up today, my pn is - 90915-YZZF2