FS: 91T Rolling Shell Part-Out (White, sunroof, blue cloth interior)

[RedStarr]

Dude, in your own post where you quoted me is the price of the door...smh...




The molding is no longer on the door and the rust just runs straight along the molding.

[RedStarr]

Let's scrap this thing to the bone...I'd like to dump the shell this week so if here's ANYTHING you want that I haven't taken off yet like a suspension piece (ie. crossmember, strut housing) or a sensor (ABS control unit) or an A/C line or something...dash harness? Let's get it!

[tstoney82]

Originally Posted by RedStarr

DS window regulator SOLD.

DS quarter panel SOLD.

Door control sensor SOLD.



Yes, 3rd brake light. Yes, center piece for the tails (some work needed. I'd rattle can spray it with a nice glossy black paint to be honest).

So, the whole 91-93 JDM taillight assembly as well as the side reflectors (gotta get them from the body shop as well because the passenger side I think is there) and the third brake light...$95 shipped

TanquerayG, the doors appear to not have had any prior work done to them but they will need work (the rust on the DS door). The door would include the glass and the shell and that's it. $85 picked up.

Canibuz, yes, the driver's side door is dent free but had rust where the molding was. The glass is intact and I have the handles, but you'd have to get the bolts or if I can find the bolts in my bolt-box. Pickup only.

i get paid friday so i will get them from you then. is that ok?

[RedStarr]

No dibs w/o cash so if I still have everything by then, sure

[RedStarr]

Here's an updated picture of the back half of the car... haha

[RedStarr]

Oh! I forgot I had a better picture of the driver's side door...

My cousin and my boy Ron were demonstrating the effects of weight reduction...you can see the rust on the door in this picture. I don't know much about dealing with rust but I'd guess that you could fix it still.

[ITS MR 2]

i need passenger side window motor

[MRH]

think you could part with the speakers and the metal disk that they sit in? maybe the factory speaker too? for the front and the back?

[TanquerayG]

Do you have the condition and price for the e-brake cable (handle to assembly) or e-brake assembly (part between e-brake cable and two cables going to wheels)? How much to ship to 01702? Have a pic?

What about the driver's side fender liner...condition and price?

Also, what about the light bulb sockets for the rear lights? Mine have rusted form too much water getting in the lens area.

[halo07]

is the kick panel and trim pice still in good condition? and how much are you wanting for it?

[kbrew8991]

any word on those undertrays? - paypal ready...

[RedStarr]

Whew, I haven't checked this forum, sorry guys.

Pat, sorry I haven't shipped the sunroof yet. I don't know what I was thinking about having it shipped on Sunday(?). The earliest I could've shipped it was yesterday but today, my girlfriend has a box from her job that she said should be perfect for the sunroof and I have a fair amount of bubble wrap I'm going to try and use and get the package insured. So, I'm trying to get it out today before I go to work at 6pm.

ITS MR2, passenger side window regulator, $46 shipped should get it covered. The DS one was bought picked up so I'm guesstimating on shipping. I HOPE it fits in the Priority Mail box or else I'll have to find something else...hmmm...

MRH, I know I have the door speakers. The speakers from the back, I have to find in the 5-6 boxes. If I can't find them, the door speakers, $15 shipped. If I can find them, $20 shipped for everything. I'll let you know the next time I go over there.

TanquerayG, we still didn't finish getting the e-brake stuff out yet. We had a guy cutting the quarter panel out for his girlfriend's car and by the time that was done, it was too dark to see anything. I was ready to jack the car out and pull the bracket that holds the cables to the underside of the car, but didn't get to. I'll see if I can get out there tomorrow. The fender liner, I want $20 for it plus shipping and the license plate sockets have to get taken out next time because the rear bumper is partially on and somebody wants the lenses.

Halo07, the trim piece is in great condition. I want $20 for also but I'd have to get a quote on getting a box shipped of that size to Ohio. (Google says Huber Heights is in Ohio. Correct?)

kbrew, the underpanels looked good when I jacked the car up (it was dusk) but we didn't get a chance to take them off yet.


Sorry guys, making it the 10 miles out there w/ no car (depending on rides while my car is in the body shop) to take off parts by myself is difficult, so I usually am at the mercy of the work schedules of friends.

I'd like to get out there either tomorrow or Thursday to get cracking on it again.

[RedStarr]

Perfect condition visors ($50 shipped) as well as the turbo gauge cluster ($120 obo -- make an offer!) is on hand (At my house next to me) ready to ship

[kbrew8991]

I understand - keep me posted, I need *something* in hand within 3 weeks, though sooner is better

[kbrew8991]

I also need the driver's side corner marker light (both pieces, not the one by itself in the body molding)

[TanquerayG]

I already found and bought an e-brake cable (handle to assembly) and e-brake assembly (part between e-brake cable and two cables going to wheels) so no need for you to check on it's condition or pull it off.

I want the driver's side fender liner you offer for $20 plus shipping...I am at zip code 01702. How much to ship and how will you ship (fold up the liner or put it in a big box)? I understand it can cost extra for a big low-weight box.

I am still interested in the tail light wiring harnesses (2) with the light bulb sockets. Please let me know if you have it, have rust-free sockets, price.

You still have both doors?

[drateda.w.d]

Hey, if he doesn't take the 2 rear E-brake cables, i will take those off your hands.

Also, do you have the wiper control switch from the steering column?

[240slider]

do u have a passenger fender and a stock front bumper?

[RedStarr]

Sorry I've been MIA...I end up spending more time on the other board and it has been a hassle to ship some larger items. I should have my car back in a day or two so it'll be a lot easier to ship items.

The car is ALMOST to the bare bones. The e-brake cables aren't out yet, ABS control isn't out yet, and the front brakes aren't off yet.

Underbody panels are a no.

License plate lenses are out but the sockets are still in there.

I made a mistake and front trunk latch is a yes.

Wiper control lever is a yes.

I'll have to check to see if the taillights have rust-free sockets as I didn't remember to look at this when I was there. I would ship the fender liner by either rolling it, folding, or flattening it. Whichever works cheapest and would provide the least damage, unless the buyer explicitly states otherwise.

240slider, I'm going to blatantly ignore your question for refusing to read the first post.

Yes, I have both doors although there is some rust along where the door molding was. More or less ding-free but I wouldn't suggest putting them on (specifically the driver's side) unless you need a straight one/shell for repaint.

kbrew, amber indicator/signal?

Halo, I'd say $30 shipped is fair?

tstoney, still have to get my car back from the bodyshop in a couple of days and the front lights they took from the shell are in it so I have to make sure they still have the front reflectors intact.

Still waiting for my car...here's the latest progress:




Engine Harness SOLD
ECU SOLD
Shifter Cables SOLD
Rear turbo hubs SOLD
Passenger side mirror SOLD
Radio trim SOLD

[iceman]

are you willing to part the door panels ? also a passenger foglight