Parts MR2 Turbo show/ race car break in tune 6.5psi 270whp

Mr2Turboneous · 09-30-2009, 03:56 AM

I I have in intire mr2 turbo that was built for show and streetdriving with a motor built to race. with my bad luck I only got 7,000 miles on it and 1 year before within 1 month my mom slowly backed into the back bumper, causing small spiderweb in the paint but no bumper damage (its plastic oem bumper). that was enough to make me want to hurt something. then a few weeks later my sister backed into the front of it this time, again in our crowded drive. AND NOW to top it off I have a blown head gasket, probably installed incorrectly by toyota as it was a trd part but the mechanic was in ass. I HAVE A NEW FRONT BUMPER, and the back bumper only needs lightly sanded in middle and repainted which could be done cheap.

WHOLE CAR - $4000 (fully built car started build 06 and didn't start driving tell 08' so its practicly one year old! capable of 340 WHP in current condition with the small turbo on it. internals capable of 450WHP+!!) $ 30 k in reciepts all dated and documented! just needs a little fixing and i want to start a new build. car could easily be perfect with $900-$1800 repairs,

PARTS LIST
(IM GOING TO BED BUT ITS GOING TO BE LONG LONG IN AFTERMARKET AND ALMOST NEW OEM PARTS!!!!)

ALL BLACK INTERIOR( let me know if you want anything and ill start reserving, panels,seat,carpet,etc)

Yamaha r1 Blue exterior

greddyintercooler

fully built motor capable 500 whp with bigger turbo- whole $1200

etc etc

tanable, front rear antisway and anti roll!

custom ct-26 (cant remember exactly but it produced the highest whp for any ct-26 3sgte at 367 whp) car dynoed at 7 psi 275 whp 230 ft lbs! turbo capable of 17 psi before it start throwing hot air. will find out exact mods later

etc
etc.

PLEASE POST ITEMS WANTED PICS COMING SOON

pdmac · 09-30-2009, 11:24 AM

Price on intercooler and piping?

houston2 · 09-30-2009, 04:36 PM

do you have a WALBRO 255 LPH Fuel pump or a top feed fuel rail?

MR. MR2 · 09-30-2009, 05:36 PM

r da door pannels for a power window or a manual i need the passenger 1 for a manual window thanks

4playracing · 09-30-2009, 09:30 PM

shoot me a pm about what exhaust and cams are on the car im interested.

RedStarr · 09-30-2009, 10:17 PM

I personally think you should fix it and sell it for a higher price...sorry to hear about it. Send your mom and sister for some driving lessons.

Mr2Turboneous · 10-02-2009, 08:23 PM

They are manual role ups which I believe to be the best because mr2's are built for light weight and the maual windows and locks will save you mucho weight. The doors are perfect inside and out with black inner panels and freshly painted black side molding. you wont find a better door $200 complete each obo. or the skin itself with all mechanics and no panel for $150 obo.

Mr2Turboneous · 10-02-2009, 08:59 PM

Quote:

Originally Posted by houston2

do you have a WALBRO 255 LPH Fuel pump or a top feed fuel rail?

YES I DO I Believe its in the tank if thats correct. mabe $60 bucks but Im not sure when Ill get it out. has 7
k miles on it

Mr2Turboneous · 10-02-2009, 09:00 PM

7250 miles
to be exact

Mr2Turboneous · 10-02-2009, 09:11 PM

EVERYTHING STILL FOR SALE I WILL POST ALL PARTS SOLD THE DAY THEY ARE SOLD SO EVERYTHING IS STILL HERE...

short throw shifter (not TRD the super short one with polished steal pool nall size grip- $60 obo

GREDDY twin tip exhaust perfect condition- $330 obo retail- $650
Bellmouth downpipe HKS I believe - $75 obo
mid pipe- stock gutted with welded adapters- $30

$ wheel and tires in good shape $460 firm
brand new not painted or installed polyurethane high end front bumper type B not crap fiberglass - $200 obo

rear bumper no damage- $150 obo
seats $400 obo ( perfect no tears blue oem)
black carpet $ 100
Door skins black perfect $150 pair
tanable front anti roll- $70 obo
front and rear tanable sway bar $100 each obo retail $200 each

Mr2Turboneous · 10-03-2009, 02:34 PM

ALL BLACK INTERIOR FLAWLESS CONDITION- (almost everything is new oem replacement parts custom order from japan)

Black dash- $150 perfect
center console- (between seats) $40 perfect
door panels- $100 each perfect
black carpet and behind seat insulator- $150 obo
2 dark blue mr2 seats mint condition no joke- $170 obo each

SUSPENSION all 50% off retail atleast! 5 k miles on parts
TANABLE front and rear SWAY BARS 5 k miles with new bushing sets for both$100 each
TANABLE anti roll bar front only- $60

Body- Front fenders left and right- $100 each no dents perfect condition!
Front hood- tipical paint nicks on front tip no dent flawless and beuty $180
Greddy side skirts ( I normally hat b- kits but these are designed to work with the greddy smic and a cold air to create 1.7 X more air to intercooler)- $150 perfect cond.
Rear bumper OEM perfect condition- $150 obo
rear engine lid no dents perfect $80
rear trunk lid(2 tiny dents)- $70
any thing else like plastics and whatever-$20 each obo
perfect condition black side molding complete- $100 firm

WTF no one wants perfect condition parts for the ultimate rair mr2 Turbo.... No ones asking make me offers!!! will hook it up in packages...

Mr2Turboneous · 10-03-2009, 02:42 PM

BRAnD NEW NEVER INSTALLED OR PAINTED TYPE B FRON BUMPER(replacement fr]or one that got hit)
-Polyurthane ( best material for b-kits hands down!)
-Increase flow to radiator by nearly 50%
has perfect little spot to mount 4" fog or high beams!
(Normally I hate body kits but with the functionallity and everything every one whos seen it agrees its a winner!)
This is a legit TYPE B from japan not some nock off!
$200 + shipping or pick it up in denver area!

Mr2Turboneous · 10-03-2009, 02:44 PM

sunroof glass and hardware-$100 obo perfect condition with oem tint

Mr2Turboneous · 10-03-2009, 02:48 PM

turbo ct-26 moded with different exhaust housing and trim, also ported... I for some reason cant think but its a frankenstein mod combining parts from 2 turbos and some aftermarket parts will get details later. known as the most powerfull ct-26 turbo ever made. ( Produce 350WHP on a rally style 3sgte at 17 psi) near NEW no shaft play @$300 firm ( paid like $800 something for he rebuild will take pic of turbo reciceipt soon)

moded TURBO- $300 FIRM

Mr2Turboneous · 10-03-2009, 02:53 PM

Walbro 255 fuel pump $50 5k miles
8 AL Fuel line and all fittings- $70
adjustable fuel pressure regulator- $40
Inline fuel pressure gauge-$20
Unorthodox racing pully crankshaft (blue) - $50

Mr2Turboneous · 10-03-2009, 02:55 PM

EXHAUST
HKS DOWNPIPE- $90 obo
Greddy Twin tip muffler-$299 Retails for $600

traintech86 · 10-03-2009, 03:02 PM

Quote:

Originally Posted by Mr2Turboneous

my mom slowly backed into the back bumper, causing small spiderweb in the paint but no bumper damage (its plastic oem bumper). that was enough to make me want to hurt something. then a few weeks later my sister backed into the front of it this time, again in our crowded drive.

tell them to park in the street and stop beating your car up haha

pdmac · 10-03-2009, 10:09 PM

I'm interested in the downpipe - I'll PM you an email address for a pic. Thx.

4playracing · 10-05-2009, 12:24 AM

i want the exhaust pending pictures. please send them to
lilcracka16@aol.com thanks

Mr2Turboneous · 10-06-2009, 03:09 AM

Quote:

Originally Posted by pdmac

I'm interested in the downpipe - I'll PM you an email address for a pic. Thx.

PICTURES WILL BE COMING SOON OF ALL PARTS REMOVED on post...
dissasembled interior & EXHUAST so far...
Borrowing my bro's camera so its hard to get them to my computer...

Nothing is sold yet so just post which part your interested in and Ill make sure to get pictures up within the week

09-30-2009, 03:56 AM	#1 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Parts MR2 Turbo show/ race car break in tune 6.5psi 270whp Item Location: colorado I I have in intire mr2 turbo that was built for show and streetdriving with a motor built to race. with my bad luck I only got 7,000 miles on it and 1 year before within 1 month my mom slowly backed into the back bumper, causing small spiderweb in the paint but no bumper damage (its plastic oem bumper). that was enough to make me want to hurt something. then a few weeks later my sister backed into the front of it this time, again in our crowded drive. AND NOW to top it off I have a blown head gasket, probably installed incorrectly by toyota as it was a trd part but the mechanic was in ass. I HAVE A NEW FRONT BUMPER, and the back bumper only needs lightly sanded in middle and repainted which could be done cheap. WHOLE CAR - $4000 (fully built car started build 06 and didn't start driving tell 08' so its practicly one year old! capable of 340 WHP in current condition with the small turbo on it. internals capable of 450WHP+!!) $ 30 k in reciepts all dated and documented! just needs a little fixing and i want to start a new build. car could easily be perfect with $900-$1800 repairs, PARTS LIST (IM GOING TO BED BUT ITS GOING TO BE LONG LONG IN AFTERMARKET AND ALMOST NEW OEM PARTS!!!!) ALL BLACK INTERIOR( let me know if you want anything and ill start reserving, panels,seat,carpet,etc) Yamaha r1 Blue exterior greddyintercooler fully built motor capable 500 whp with bigger turbo- whole $1200 etc etc tanable, front rear antisway and anti roll! custom ct-26 (cant remember exactly but it produced the highest whp for any ct-26 3sgte at 367 whp) car dynoed at 7 psi 275 whp 230 ft lbs! turbo capable of 17 psi before it start throwing hot air. will find out exact mods later etc etc. PLEASE POST ITEMS WANTED PICS COMING SOON Attached Thumbnails

10-02-2009, 08:23 PM	#7 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	They are manual role ups which I believe to be the best because mr2's are built for light weight and the maual windows and locks will save you mucho weight. The doors are perfect inside and out with black inner panels and freshly painted black side molding. you wont find a better door $200 complete each obo. or the skin itself with all mechanics and no panel for $150 obo. Last edited by Mr2Turboneous; 10-03-2009 at 02:16 PM.

10-02-2009, 09:11 PM	#10 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	EVERYTHING STILL FOR SALE I WILL POST ALL PARTS SOLD THE DAY THEY ARE SOLD SO EVERYTHING IS STILL HERE... short throw shifter (not TRD the super short one with polished steal pool nall size grip- $60 obo GREDDY twin tip exhaust perfect condition- $330 obo retail- $650 Bellmouth downpipe HKS I believe - $75 obo mid pipe- stock gutted with welded adapters- $30 $ wheel and tires in good shape $460 firm brand new not painted or installed polyurethane high end front bumper type B not crap fiberglass - $200 obo rear bumper no damage- $150 obo seats $400 obo ( perfect no tears blue oem) black carpet $ 100 Door skins black perfect $150 pair tanable front anti roll- $70 obo front and rear tanable sway bar $100 each obo retail $200 each Last edited by Mr2Turboneous; 10-03-2009 at 02:17 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-30-2009, 11:24 AM	#2 (permalink)
pdmac Some Skills Join Date: Aug 2008 Location: Southern Indiana Posts: 68 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (2/100% )	Price on intercooler and piping?

09-30-2009, 04:36 PM	#3 (permalink)
houston2 No Skills Join Date: Apr 2009 Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	do you have a WALBRO 255 LPH Fuel pump or a top feed fuel rail?

09-30-2009, 05:36 PM	#4 (permalink)
MR. MR2 Some Skills Join Date: Feb 2009 Location: los angeles Posts: 76 Thanks: 13 Thanked 1 Time in 1 Post Blog Entries: 1 iTrader Rating: (0/0% )	r da door pannels for a power window or a manual i need the passenger 1 for a manual window thanks

09-30-2009, 09:30 PM	#5 (permalink)
4playracing No Skills Join Date: Oct 2007 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	shoot me a pm about what exhaust and cams are on the car im interested.

09-30-2009, 10:17 PM	#6 (permalink)
RedStarr i CaN hAZ bEEf pAttY? Join Date: Jun 2006 Location: Jamaica, NY Posts: 512 Thanks: 20 Thanked 27 Times in 9 Posts iTrader Rating: (2/100% )	I personally think you should fix it and sell it for a higher price...sorry to hear about it. Send your mom and sister for some driving lessons.

10-02-2009, 09:00 PM	#9 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	7250 miles to be exact

10-03-2009, 02:34 PM	#11 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	ALL BLACK INTERIOR FLAWLESS CONDITION- (almost everything is new oem replacement parts custom order from japan) Black dash- $150 perfect center console- (between seats) $40 perfect door panels- $100 each perfect black carpet and behind seat insulator- $150 obo 2 dark blue mr2 seats mint condition no joke- $170 obo each SUSPENSION all 50% off retail atleast! 5 k miles on parts TANABLE front and rear SWAY BARS 5 k miles with new bushing sets for both$100 each TANABLE anti roll bar front only- $60 Body- Front fenders left and right- $100 each no dents perfect condition! Front hood- tipical paint nicks on front tip no dent flawless and beuty $180 Greddy side skirts ( I normally hat b- kits but these are designed to work with the greddy smic and a cold air to create 1.7 X more air to intercooler)- $150 perfect cond. Rear bumper OEM perfect condition- $150 obo rear engine lid no dents perfect $80 rear trunk lid(2 tiny dents)- $70 any thing else like plastics and whatever-$20 each obo perfect condition black side molding complete- $100 firm WTF no one wants perfect condition parts for the ultimate rair mr2 Turbo.... No ones asking make me offers!!! will hook it up in packages...

10-03-2009, 02:42 PM	#12 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	BRAnD NEW NEVER INSTALLED OR PAINTED TYPE B FRON BUMPER(replacement fr]or one that got hit) -Polyurthane ( best material for b-kits hands down!) -Increase flow to radiator by nearly 50% has perfect little spot to mount 4" fog or high beams! (Normally I hate body kits but with the functionallity and everything every one whos seen it agrees its a winner!) This is a legit TYPE B from japan not some nock off! $200 + shipping or pick it up in denver area!

10-03-2009, 02:44 PM	#13 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	sunroof glass and hardware-$100 obo perfect condition with oem tint

10-03-2009, 02:48 PM	#14 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	turbo ct-26 moded with different exhaust housing and trim, also ported... I for some reason cant think but its a frankenstein mod combining parts from 2 turbos and some aftermarket parts will get details later. known as the most powerfull ct-26 turbo ever made. ( Produce 350WHP on a rally style 3sgte at 17 psi) near NEW no shaft play @$300 firm ( paid like $800 something for he rebuild will take pic of turbo reciceipt soon) moded TURBO- $300 FIRM

10-03-2009, 02:53 PM	#15 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Walbro 255 fuel pump $50 5k miles 8 AL Fuel line and all fittings- $70 adjustable fuel pressure regulator- $40 Inline fuel pressure gauge-$20 Unorthodox racing pully crankshaft (blue) - $50

10-03-2009, 02:55 PM	#16 (permalink)
Mr2Turboneous huh? Join Date: Oct 2008 Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	EXHAUST HKS DOWNPIPE- $90 obo Greddy Twin tip muffler-$299 Retails for $600

10-03-2009, 10:09 PM	#18 (permalink)
pdmac Some Skills Join Date: Aug 2008 Location: Southern Indiana Posts: 68 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (2/100% )	I'm interested in the downpipe - I'll PM you an email address for a pic. Thx.

10-05-2009, 12:24 AM	#19 (permalink)
4playracing No Skills Join Date: Oct 2007 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	i want the exhaust pending pictures. please send them to lilcracka16@aol.com thanks