FS: Suspension Parts

BRAUVIC · 10-16-2009, 04:47 PM

PICKLE: I found a bone stock black on black for an outstanding price. I want it for my *remain stock* car(since there seems to be few of them left) and its in mint condition.
This being said, I no longer have any use for my unused polyurethane kit, sway bars, or engine mounts. Also ignition stuff(PM me for info on that)

If anything down the road needs replaced I plan on using OEM. My upgrade buy = your gain.

Sways are 15/16 and 7/8 front and rear, never installed, kept in storage. Moved across country 2 times recently and the green paint was scuffed in the process. No functional defects,

2 Anti Roll Support mounting plates (where the mounts typically crack over the years),

Front and Rear Polyurethane Mounts,

Control Arm Bushings,

Motor Mounts,

Make offer, this is a full Poly Kit with Eibach Bars.

mrtwo1991 · 11-10-2009, 06:41 AM

Hi:

How much for the front and rear swat bars and the reinforcement mounting plates shipped to Roanoke, VA (zip 24019).

Who is the manufacturer of the sway bars?

Do the bars come with new polyurethane bushings?

Will these fit on a 91 NA?

Do you have any end links you want to sell as well?

Thanks,

Johndoe205 · 11-10-2009, 08:04 AM

Can i get those poly mounts off of you iam willing to come by and pick it up and the sways

mrtwo1991 · 11-18-2009, 06:29 AM

Did you sell these parts? If not, please reply to my message. Thanks,

mr2trd91 · 11-18-2009, 02:05 PM

how much for sways?

10-16-2009, 04:47 PM	#1 (permalink)
BRAUVIC I dream about 2's Join Date: Mar 2006 Location: New Orleans, Louisiana Posts: 58 Thanks: 0 Thanked 3 Times in 3 Posts My Google Map iTrader Rating: (0/0% )	FS: Suspension Parts Item Location: New Orleans PICKLE: I found a bone stock black on black for an outstanding price. I want it for my remain stock car(since there seems to be few of them left) and its in mint condition. This being said, I no longer have any use for my unused polyurethane kit, sway bars, or engine mounts. Also ignition stuff(PM me for info on that) If anything down the road needs replaced I plan on using OEM. My upgrade buy = your gain. Sways are 15/16 and 7/8 front and rear, never installed, kept in storage. Moved across country 2 times recently and the green paint was scuffed in the process. No functional defects, 2 Anti Roll Support mounting plates (where the mounts typically crack over the years), Front and Rear Polyurethane Mounts, Control Arm Bushings, Motor Mounts, Make offer, this is a full Poly Kit with Eibach Bars. Attached Thumbnails Last edited by BRAUVIC; 10-18-2009 at 11:35 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-10-2009, 06:41 AM	#2 (permalink)
mrtwo1991 No Skills Join Date: Oct 2008 Posts: 35 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	Hi: How much for the front and rear swat bars and the reinforcement mounting plates shipped to Roanoke, VA (zip 24019). Who is the manufacturer of the sway bars? Do the bars come with new polyurethane bushings? Will these fit on a 91 NA? Do you have any end links you want to sell as well? Thanks,

11-10-2009, 08:04 AM	#3 (permalink)
Johndoe205 No Skills Join Date: Feb 2008 Location: New Orleans Posts: 35 Thanks: 1 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (3/100% )	Can i get those poly mounts off of you iam willing to come by and pick it up and the sways

11-18-2009, 06:29 AM	#4 (permalink)
mrtwo1991 No Skills Join Date: Oct 2008 Posts: 35 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	Did you sell these parts? If not, please reply to my message. Thanks,

11-18-2009, 02:05 PM	#5 (permalink)
mr2trd91 "under construction" Join Date: Dec 2005 Location: michigan Posts: 201 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (3/100% )	how much for sways?