Yellow '93T Total Part Out: AEM, 2.2L Stroker SB, Built head, SB46, SSR - HUGE list!

Dego Red · 10-29-2009, 12:34 PM

NEW PICS AND NEW ITEMS ARE UP!!
Due to the (ridiculously small) image embedding rule, I can't get them all here - sorry fellas. There's a few new engine teasers below, and plenty more in Webshots.

>> degored's photos and albums on webshots <<

Anything not shown, I will get pics as they are requested.

I've been nice to everyone who's asked, but now I'm going to make it painfully obvious:
NO PART OF THE ROLLER - INCLUDING WHAT'S LISTED BELOW - WILL BE SEPARATED, UNLESS A SPECIFIC DEAL IS STRUCK FOR THE SHELL!

Roller - $2500

Highlights:
Willing to throw in the matching black/yellow-stitched seats & shift boot at half price if someone takes the roller!
Painted ’93 front lip
GReddy side skirts
JDM marker inserts
94-95 tail lights
Eibach springs
Tokico 5-way adjustable shocks
New front ball joints & bushings
NA brakes
Stock wheels
90% interior

Without:
Engine
Trans
Axles
Seats
...and anything listed below

The car itself:

EMAIL me at mjgianunzio@gmail.com for anything you're interested in, or that's not listed and we can work something out. Here goes (prices w/o shipping)...

Engine - Made 371whp @ only 22psi on pump/meth in 93-degF ambient!: $nocash$ stroker, 32k proven miles (not just recently built!) Right here, WYSIWYG - NO cleaning whatsoever. The oil was due to be changed (removed a little before 3k), but no yellowing, no signs of buildup, etc. More pics in Webshots link above.

2.2L Stroker Shortblock - $1650
92 3SGTE head/block
95 Camry crank
Pauter rods
Custom coated Wiseco 9:1 pistons - .040 over.
Brand new Toyota parts (roughly $700 worth)
- Timing covers
- Crank pulley
- Tensioner
- Idler pulleys
- Oil and water pumps
- Timing belt
- Rod/main/thrust bearings etc.
Master gasket kits throughout

Head - $1650
Casting marks removed/Mild port
Radius valve job
Engle springs
01 MRS shimless bucket conversion
HKS 272 cams and gears - degreed.

[/url]

ARP head studs, perfect - $75
NEW Cometic 1.4mm head gasket - $115

Newly added stuff - All parts have 75k on them (no rebuilds, etc). Shipped prices are ONLY for the 48 states! Anywhere else is actual shipping.
OEM Throttle body with IACV - $60 shipped
OEM intake manifold - $60 shipped
OEM starter - $60 shipped
OEM clutch slave cyl - $40 shipped
OEM alternator - $60 shipped
Non-LSD turbo trans w/ 75k miles - $250
Turbo engine harness, will be cleaned/inspected/re-wrapped - $250

Fuel
AEM methanol kit w/ half-gallon tank - $250 PIC on WS

Control
AEM EMS (30-1121 jumpered for ’91 harness) with GM IAT and GM 3.5 bar map sensor - $1150 Shipped Deposit received, sale pending...
Stock Gen2 ECU - $50 PIC on WS

Turbo & Exhaust
SB46 Kit w/ zero-mile rebuilt turbo from Precision - $1600
-> Two turbo options: Standard 46-trim, or the "Super 46" - email for details.
- Polished compressor housing
- Coated turbine housing
- 3” V-band & downpipe
- 3” coated B-pipe from KO
- Tial 44mm WG w/ 7 & 14psi springs

Suspension/Brakes/Wheels
BNIB Prothane rear bushings - $40
BNIB Front and Rear sway bar bushings - $20
BNIB rear ball joints - $50
‘93 turbo brakes, F&R w/ OEM pads and rotors - $415

Sound (all that's left)
Kenwood KAC-X201T Amp, 100W RMS x2, Bridgeable - $50
JL Audio XR Crossover Network - Email or PM for details

Interior/Chassis
New black leather with yellow stitching/embroidered headrest logo and new black leather shift boot with yellow stitching - $600 PIC on WS
Dual A-pillar pod $45 PIC on WS

Thanks,
Mike

Ncturnal · 10-29-2009, 02:12 PM

Nice looking MR2. Good luck with the sale.

boostdmr2 · 10-29-2009, 04:27 PM

Do you know if the Eibach springs with fit on a 91T? Also how much do they lower the car?

P.S. I love your supra, is it a twin turbo?

datguydeni · 10-29-2009, 10:40 PM

Quote:

Originally Posted by boostdmr2

Do you know if the Eibach springs with fit on a 91T? Also how much do they lower the car?

P.S. I love your supra, is it a twin turbo?

the spring will probably drop you 1.5 inch all around and yes it will fit all mr2s have the same suspension except for a few things such as brakes.

Anyways op do you have the strut rod/tie rod passenger side?

98kouki · 10-30-2009, 10:36 AM

so any chance u have any feedback from someone where. i want some stuff

MDoe8 · 10-30-2009, 12:39 PM

You should part out that head

Tylerfishsmith · 10-30-2009, 03:07 PM

How much for the sideskirts?

Dego Red · 10-31-2009, 05:26 AM

First, sorry I didn't get back to you guys - I didn't even know this was up yet. Anyway...

Quote:

Originally Posted by Ncturnal

Nice looking MR2. Good luck with the sale.

Appreciate that.

Quote:

Originally Posted by boostdmr2

Do you know if the Eibach springs with fit on a 91T? Also how much do they lower the car?

P.S. I love your supra, is it a twin turbo?

Just tonight I made the decision to keep the springs with the roller - sorry!

The Supra was a single-turbo'd, 700+whp 6spd. I sold it two years ago before I left Michigan, shipping it to a buyer in Dubai.

Quote:

Originally Posted by datguydeni

Anyways op do you have the strut rod/tie rod passenger side?

Well as I mentioned above, I don't want part anything from the roller itself. The closest thing I can offer is a brand new pair of tie rod ends that I didn't get listed yet. PM me if you need them. Thx

Quote:

Originally Posted by 98kouki

so any chance u have any feedback from someone where. i want some stuff

Supraforums: +22 (100%)
eBay u/n "leadingedgeofmi": 52 (100%)

I actually tried to be preemptive and put that in my original post, but I thought the mods shot me down because I listed a site "that which we do not speak of." Guess I was breaking the rules before I even posted once or knew I was doing so.

Quote:

Originally Posted by MDoe8

You should part out that head

I'm on the fence - If I do, you'll be the first to know.

Quote:

Originally Posted by Tylerfishsmith

How much for the sideskirts?

See above.

Thanks guys,
Mike

98kouki · 10-31-2009, 06:25 PM

how much for the front clear light and solid side marker

Dego Red · 10-31-2009, 08:05 PM

Quote:

Originally Posted by 98kouki

how much for the front clear light and solid side marker

Please read the very first post.

98kouki · 10-31-2009, 09:38 PM

Quote:

Originally Posted by Dego Red

http://www.supra411.com/forums/image...s/facepalm.gif

Please read the very first post.

my bad, i skip that part lol

Dego Red · 11-01-2009, 01:38 AM

Quote:

Originally Posted by 98kouki

my bad, i skip that part lol

No prob, man. Three of every four inquiries I get (here, craigslist, etc) is for the body parts. As soon as people see them, they're all over it. No one can blame you for having good taste.

Besides, it gives me a reason to use the facepalm smiley.

91_mr2_boi · 11-01-2009, 04:03 AM

pics of the 93 lip? if for sale and still have also price would be nice! Thanks

pinoy_dorifto · 11-01-2009, 09:18 AM

Got radiator electric fan??? i just need one.. ship to 90020?

Dego Red · 11-01-2009, 06:14 PM

Quote:

Originally Posted by 91_mr2_boi

pics of the 93 lip? if for sale and still have also price would be nice! Thanks

Quote:

Originally Posted by pinoy_dorifto

Got radiator electric fan??? i just need one.. ship to 90020?

Wow. You guys didn't read ANY of this thread, did you?

Yellow '93T Total Part Out: AEM, 2.2L Stroker SB, Built head, SB46, SSR - HUGE list!

sw22.0 · 11-04-2009, 06:22 PM

do you still have the cener column between the seats and the rear compartment?

lucky_charms · 11-04-2009, 07:32 PM

how much were u looking for the shell

Dego Red · 11-09-2009, 11:10 AM

Quote:

Originally Posted by sw22.0

do you still have the cener column between the seats and the rear compartment?

Holy crap!!

Quote:

Originally Posted by lucky_charms

how much were u looking for the shell

With everything listed under the roller, probably $2500. It's got that in paint alone. I could part it down further, but it just becomes harder to sell...

MR2_RN · 11-10-2009, 01:30 PM

Buy with confidence, great local guy who takes care of his stuff. GLWS

Dego Red · 11-12-2009, 11:24 AM

Bump for new parts, new pics, and updates!

10-29-2009, 12:34 PM	#1 (permalink)
Dego Red No Skills Join Date: Oct 2009 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	Yellow '93T Total Part Out: AEM, 2.2L Stroker SB, Built head, SB46, SSR - HUGE list! Item Location: Portland, OR NEW PICS AND NEW ITEMS ARE UP!! Due to the (ridiculously small) image embedding rule, I can't get them all here - sorry fellas. There's a few new engine teasers below, and plenty more in Webshots. >> degored's photos and albums on webshots << Anything not shown, I will get pics as they are requested. I've been nice to everyone who's asked, but now I'm going to make it painfully obvious: NO PART OF THE ROLLER - INCLUDING WHAT'S LISTED BELOW - WILL BE SEPARATED, UNLESS A SPECIFIC DEAL IS STRUCK FOR THE SHELL! Roller - $2500 Highlights: Willing to throw in the matching black/yellow-stitched seats & shift boot at half price if someone takes the roller! Painted ’93 front lip GReddy side skirts JDM marker inserts 94-95 tail lights Eibach springs Tokico 5-way adjustable shocks New front ball joints & bushings NA brakes Stock wheels 90% interior Without: Engine Trans Axles Seats ...and anything listed below The car itself: EMAIL me at mjgianunzio@gmail.com for anything you're interested in, or that's not listed and we can work something out. Here goes (prices w/o shipping)... Engine - Made 371whp @ only 22psi on pump/meth in 93-degF ambient!: $nocash$ stroker, 32k proven miles (not just recently built!) Right here, WYSIWYG - NO cleaning whatsoever. The oil was due to be changed (removed a little before 3k), but no yellowing, no signs of buildup, etc. More pics in Webshots link above. 2.2L Stroker Shortblock - $1650 92 3SGTE head/block 95 Camry crank Pauter rods Custom coated Wiseco 9:1 pistons - .040 over. Brand new Toyota parts (roughly $700 worth) - Timing covers - Crank pulley - Tensioner - Idler pulleys - Oil and water pumps - Timing belt - Rod/main/thrust bearings etc. Master gasket kits throughout Head - $1650 Casting marks removed/Mild port Radius valve job Engle springs 01 MRS shimless bucket conversion HKS 272 cams and gears - degreed. [/url] ARP head studs, perfect - $75 NEW Cometic 1.4mm head gasket - $115 Newly added stuff - All parts have 75k on them (no rebuilds, etc). Shipped prices are ONLY for the 48 states! Anywhere else is actual shipping. OEM Throttle body with IACV - $60 shipped OEM intake manifold - $60 shipped OEM starter - $60 shipped OEM clutch slave cyl - $40 shipped OEM alternator - $60 shipped Non-LSD turbo trans w/ 75k miles - $250 Turbo engine harness, will be cleaned/inspected/re-wrapped - $250 Fuel AEM methanol kit w/ half-gallon tank - $250 PIC on WS Control AEM EMS (30-1121 jumpered for ’91 harness) with GM IAT and GM 3.5 bar map sensor - $1150 Shipped Deposit received, sale pending... Stock Gen2 ECU - $50 PIC on WS Turbo & Exhaust SB46 Kit w/ zero-mile rebuilt turbo from Precision - $1600 -> Two turbo options: Standard 46-trim, or the "Super 46" - email for details. - Polished compressor housing - Coated turbine housing - 3” V-band & downpipe - 3” coated B-pipe from KO - Tial 44mm WG w/ 7 & 14psi springs Suspension/Brakes/Wheels BNIB Prothane rear bushings - $40 BNIB Front and Rear sway bar bushings - $20 BNIB rear ball joints - $50 ‘93 turbo brakes, F&R w/ OEM pads and rotors - $415 Sound (all that's left) Kenwood KAC-X201T Amp, 100W RMS x2, Bridgeable - $50 JL Audio XR Crossover Network - Email or PM for details Interior/Chassis New black leather with yellow stitching/embroidered headrest logo and new black leather shift boot with yellow stitching - $600 PIC on WS Dual A-pillar pod $45 PIC on WS Thanks, Mike Last edited by Dego Red; 11-18-2009 at 02:43 PM. Reason: Updated!

10-29-2009, 02:12 PM	#2 (permalink)
Ncturnal Google Ron Paul Join Date: Feb 2005 Location: Atlanta, GA Posts: 7,021 Thanks: 93 Thanked 127 Times in 107 Posts Blog Entries: 7 My Google Map iTrader Rating: (33/100% )	Nice looking MR2. Good luck with the sale. __________________ Brian - My MR2Trader Ads - Click here for order or shipping status if you've bought something from me recently. Technical Questions - Please post them on the forums. Others who may have the same problem don't benefit from a PM exchange. If you wish to have my input I have no problem with a PM containing a link to a thread you have already posted.

10-29-2009, 04:27 PM	#3 (permalink)
boostdmr2 Cone Assassin Join Date: Jul 2009 Posts: 32 Thanks: 1 Thanked 2 Times in 2 Posts iTrader Rating: (1/100% )	Do you know if the Eibach springs with fit on a 91T? Also how much do they lower the car? P.S. I love your supra, is it a twin turbo? Last edited by boostdmr2; 10-29-2009 at 04:32 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-30-2009, 10:36 AM	#5 (permalink)
98kouki No Skills Join Date: Jun 2009 Posts: 44 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	so any chance u have any feedback from someone where. i want some stuff

10-30-2009, 12:39 PM	#6 (permalink)
MDoe8 Cage Fighter Join Date: Sep 2009 Posts: 100 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	You should part out that head

10-30-2009, 03:07 PM	#7 (permalink)
Tylerfishsmith No Skills Join Date: Sep 2006 Location: Gulf Breeze, FL Posts: 35 Thanks: 0 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (0/0% )	How much for the sideskirts?

10-31-2009, 06:25 PM	#9 (permalink)
98kouki No Skills Join Date: Jun 2009 Posts: 44 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	how much for the front clear light and solid side marker

11-01-2009, 04:03 AM	#13 (permalink)
91_mr2_boi Cage Fighter Join Date: Mar 2008 Location: Yorktown, VA Posts: 281 Thanks: 0 Thanked 5 Times in 4 Posts iTrader Rating: (0/0% )	pics of the 93 lip? if for sale and still have also price would be nice! Thanks

11-01-2009, 09:18 AM	#14 (permalink)
pinoy_dorifto Cage Fighter Join Date: Apr 2007 Posts: 141 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (4/100% )	Got radiator electric fan??? i just need one.. ship to 90020?

11-04-2009, 06:22 PM	#16 (permalink)
sw22.0 No Skills Join Date: Jul 2008 Location: nova Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	do you still have the cener column between the seats and the rear compartment?

11-04-2009, 07:32 PM	#17 (permalink)
lucky_charms custom Join Date: Aug 2009 Location: small ass place in ohio Posts: 244 Thanks: 4 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	how much were u looking for the shell

11-10-2009, 01:30 PM	#19 (permalink)
MR2_RN No Skills Join Date: Sep 2009 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	Buy with confidence, great local guy who takes care of his stuff. GLWS

11-12-2009, 11:24 AM	#20 (permalink)
Dego Red No Skills Join Date: Oct 2009 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	Bump for new parts, new pics, and updates!