Looking for gen 2 air flow meter

brianbooth · 05-18-2009, 07:51 PM

Mine's still being buggy - anybody got one they could part with?

Thanks in advance.

mr2magic · 05-19-2009, 02:42 AM

You could just take the thing apart and repair it. It's not hard at all. Take the ****** plastic cap off and have a look inside maybe it just needs a clean. My flapper kept sticking. The whole assembly was oxidized!! I took it all apart, cleaned and conserved everything and it's been good for the past 6 years

palos · 05-19-2009, 11:23 AM

My car was running rich and I similarly removed the plastic cover and tightened the spring. Now the car easily passes emissions even though the catalytic converter is suspect. Much cheaper than a used AFM.

Also, you can drill a small hole and remove the round cap to access the idle speed adjusting screw.

brianbooth · 05-19-2009, 11:57 AM

I'm afraid I went and pulled the plugs out and ripped all those metal connectors off of the circuit board back in the day and it's never been the same since :\ I've resoldered it a couple time but the voltage readings still seem pretty sketchy... Sometimes they'll read fine, other times they'll read wrong, and other times they won't read anything at all. But I could be just being a puts with the voltmeter and just need to clean the thing. I hear that having an oiled aftermarket filter on it can mess with it?

biorchang · 05-19-2009, 02:05 PM

I am doing an AEM install right now and will be removing my AFM. It is off of a 94 Turbo.

Make an offer

mr2sc_art · 05-20-2009, 01:05 PM

I also have one...make me a reasonable offer

brianbooth · 05-21-2009, 01:42 PM

How's $90 bucks shipped sound?

mr2sc_art · 05-24-2009, 11:18 AM

How about $100 + shipping?
Send me an email,

Art
asbastidas@yahoo.com

05-18-2009, 07:51 PM	#1 (permalink)
brianbooth Cage Fighter Join Date: Jan 2009 Location: Longview, WA Posts: 195 Thanks: 6 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	Looking for gen 2 air flow meter Mine's still being buggy - anybody got one they could part with? Thanks in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-19-2009, 02:42 AM	#2 (permalink)
mr2magic deutsch type skillz Join Date: Feb 2008 Location: Hannover, Germany Posts: 1,201 Thanks: 107 Thanked 53 Times in 49 Posts My Google Map iTrader Rating: (3/100% )	You could just take the thing apart and repair it. It's not hard at all. Take the ****** plastic cap off and have a look inside maybe it just needs a clean. My flapper kept sticking. The whole assembly was oxidized!! I took it all apart, cleaned and conserved everything and it's been good for the past 6 years

05-19-2009, 11:23 AM	#3 (permalink)
palos … Join Date: Apr 2009 Posts: 546 Thanks: 0 Thanked 44 Times in 42 Posts iTrader Rating: (0/0% )	My car was running rich and I similarly removed the plastic cover and tightened the spring. Now the car easily passes emissions even though the catalytic converter is suspect. Much cheaper than a used AFM. Also, you can drill a small hole and remove the round cap to access the idle speed adjusting screw.

05-19-2009, 11:57 AM	#4 (permalink)
brianbooth Cage Fighter Join Date: Jan 2009 Location: Longview, WA Posts: 195 Thanks: 6 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	I'm afraid I went and pulled the plugs out and ripped all those metal connectors off of the circuit board back in the day and it's never been the same since :\ I've resoldered it a couple time but the voltage readings still seem pretty sketchy... Sometimes they'll read fine, other times they'll read wrong, and other times they won't read anything at all. But I could be just being a puts with the voltmeter and just need to clean the thing. I hear that having an oiled aftermarket filter on it can mess with it?

05-19-2009, 02:05 PM	#5 (permalink)
biorchang 94 Turbo Join Date: Mar 2006 Location: Austin, TX Posts: 1,030 Thanks: 16 Thanked 52 Times in 51 Posts iTrader Rating: (9/100% )	I am doing an AEM install right now and will be removing my AFM. It is off of a 94 Turbo. Make an offer

05-20-2009, 01:05 PM	#6 (permalink)
mr2sc_art MAD skills Join Date: Jul 2005 Location: Athens, GA Posts: 20 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I also have one...make me a reasonable offer

05-21-2009, 01:42 PM	#7 (permalink)
brianbooth Cage Fighter Join Date: Jan 2009 Location: Longview, WA Posts: 195 Thanks: 6 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	How's $90 bucks shipped sound?

05-24-2009, 11:18 AM	#8 (permalink)
mr2sc_art MAD skills Join Date: Jul 2005 Location: Athens, GA Posts: 20 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	How about $100 + shipping? Send me an email, Art asbastidas@yahoo.com