2.2l engine, for a complete block

fvillota · 11-12-2009, 09:46 AM

Anyone have a complete block with no head willing to sell cheap shipped to miami fl

or a complete engine?

mmarookiejoe · 11-12-2009, 01:51 PM

I have a completely rebuilt 3sge... everything but accessories. Shoot me an offer.

MR210 · 11-14-2009, 06:07 AM

I have a 3sgte minus the t, turbo is there but broken. Everything else is perfect in it jdm engine/ecu plus forged pistons.

Let me know if you are interested or just looking at 2.2l's

fvillota · 11-14-2009, 01:00 PM

yea im interested but i dont think my pockets are deep enough.. lol

MR210 · 11-15-2009, 07:03 PM

What price range are you looking at?

fvillota · 11-15-2009, 09:45 PM

have no idea..um.. 150- 350

Primera · 11-15-2009, 11:05 PM

I don't think you will be able to find one that cheap unless you add a zero behind those numbers. I have seen them if I am remembering correctly for about $1,000.

91_mr2_boi · 11-16-2009, 01:43 AM

not exactly i got mine for 200 and thats only got 105k on it

gl to ya fvillota

Bak@EMSPowered · 11-16-2009, 06:20 AM

A junk yard may be your best bet. Just find a Camry and buy the engine out of it.

fvillota · 11-16-2009, 07:31 AM

Quote:

Originally Posted by 91_mr2_boi

not exactly i got mine for 200 and thats only got 105k on it

gl to ya fvillota

yea i know.. ive seen ppl buy them for about this range.
thanks

fvillota · 11-16-2009, 07:31 AM

Quote:

Originally Posted by baktasht

A junk yard may be your best bet. Just find a Camry and buy the engine out of it.

im gonna give that a try this weekend.

djskorch · 11-16-2009, 12:57 PM

ive got a complete block minus head(has all accessories and sensors ect) with a spun bearing.it is a 94 so id does have the knock sensor. i dont know if you looking for one to rebuild or a running one but its yours if you want it for 50 plus shipping. let me know

fvillota · 11-17-2009, 10:31 AM

Quote:

Originally Posted by djskorch

ive got a complete block minus head(has all accessories and sensors ect) with a spun bearing.it is a 94 so id does have the knock sensor. i dont know if you looking for one to rebuild or a running one but its yours if you want it for 50 plus shipping. let me know

do you happen to know how much more a rebuild would be>?

Bak@EMSPowered · 11-17-2009, 02:30 PM

Quote:

Originally Posted by fvillota

do you happen to know how much more a rebuild would be>?

If you're looking at spending the money to rebuild, you may want to consider this: http://www.mr2.com/forums/ems-powere...tml#post507459

WALKA · 11-17-2009, 02:43 PM

Hey!

I have a complete 5s that i pulled from a running car that i drove!
MR2 Owners Club Message Board™

I even power washed her! (this pic was taken before power washing) I dont want it to go to waste.

I drove it for a few weeks before i took it out in preparation of the v6 swap. It had leaky valve seals cause it would slightly smoke when it started but went away after.

Let me know i'll give you a good price!

i live in MD and im not sure how much shipping would cost but i do have a pallet for it that i can wire it down too.

CJMR2T · 11-17-2009, 03:02 PM

Quote:

Originally Posted by baktasht

A junk yard may be your best bet. Just find a Camry and buy the engine out of it.

Quote:

Originally Posted by fvillota

yea i know.. ive seen ppl buy them for about this range.
thanks

Yeah, thats my suggestion too. If you have LKQ's down there by you, you souldn't have any problem finding one for 200... We have several LKQ's up here in the Tampa / Clearwatet / St. Pete area...... Dont forget, some Celica's came with 5s's also... Finding one should not be a problem at all...

Im on the same quest myself (but not for a few more weeks most likely)....

fvillota · 11-21-2009, 11:11 PM

u guys arent gonna belive this but i cant find a f-ing 5sfe in any junk yard down here.
everyone trys to sell me a 3sfe.
wtf?!?!

DangerousType · 11-24-2009, 09:30 AM

Hard to believe your unable to find a 5sfe block in a junkyard. Just save your money up for a better installment..even if you manage to obtain a 5sfe, you still will have to perform a headgasket, waterpump,timing belt,etc just to have a decent motor running with no issues..I know how it feels to be out of a 2 but from my experience was to get a 3sgte did not change anything, drop the sucker in and couple months the motor is out the car out for rebuild..

muffinman · 11-24-2009, 10:02 AM

Mike i see tons of 5sfe's (Celicas) all the time at the junkyard in Broward.

fvillota · 11-24-2009, 02:38 PM

Quote:

Originally Posted by muffinman

Mike i see tons of 5sfe's (Celicas) all the time at the junkyard in Broward.

well ive seen a few 5sfes on the celicas in a few junks.. but im scared to take em out and have a knock..

11-12-2009, 09:46 AM	#1 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	2.2l engine, for a complete block Anyone have a complete block with no head willing to sell cheap shipped to miami fl or a complete engine?

11-17-2009, 02:43 PM	#15 (permalink)
WALKA 3vz builder Join Date: Jan 2007 Location: Bowie, MD Posts: 79 Thanks: 2 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	Hey! I have a complete 5s that i pulled from a running car that i drove! MR2 Owners Club Message Board™ I even power washed her! (this pic was taken before power washing) I dont want it to go to waste. I drove it for a few weeks before i took it out in preparation of the v6 swap. It had leaky valve seals cause it would slightly smoke when it started but went away after. Let me know i'll give you a good price! i live in MD and im not sure how much shipping would cost but i do have a pallet for it that i can wire it down too. Last edited by WALKA; 11-17-2009 at 02:52 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-12-2009, 01:51 PM	#2 (permalink)
mmarookiejoe Thesaurus-boy Join Date: Jun 2009 Location: Tulsa, Oklahoma Posts: 414 Thanks: 12 Thanked 12 Times in 12 Posts iTrader Rating: (1/100% )	I have a completely rebuilt 3sge... everything but accessories. Shoot me an offer.

11-14-2009, 06:07 AM	#3 (permalink)
MR210 Cage Fighter Join Date: Dec 2008 Location: San Antonio Posts: 100 Thanks: 3 Thanked 3 Times in 2 Posts My Google Map iTrader Rating: (0/0% )	I have a 3sgte minus the t, turbo is there but broken. Everything else is perfect in it jdm engine/ecu plus forged pistons. Let me know if you are interested or just looking at 2.2l's

11-14-2009, 01:00 PM	#4 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	yea im interested but i dont think my pockets are deep enough.. lol

11-15-2009, 07:03 PM	#5 (permalink)
MR210 Cage Fighter Join Date: Dec 2008 Location: San Antonio Posts: 100 Thanks: 3 Thanked 3 Times in 2 Posts My Google Map iTrader Rating: (0/0% )	What price range are you looking at?

11-15-2009, 09:45 PM	#6 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	have no idea..um.. 150- 350

11-15-2009, 11:05 PM	#7 (permalink)
Primera Cage Fighter Join Date: Aug 2007 Location: Tinker AFB, OK Posts: 125 Thanks: 17 Thanked 2 Times in 2 Posts iTrader Rating: (4/100% )	I don't think you will be able to find one that cheap unless you add a zero behind those numbers. I have seen them if I am remembering correctly for about $1,000.

11-16-2009, 01:43 AM	#8 (permalink)
91_mr2_boi Cage Fighter Join Date: Mar 2008 Location: Yorktown, VA Posts: 325 Thanks: 0 Thanked 7 Times in 6 Posts iTrader Rating: (0/0% )	not exactly i got mine for 200 and thats only got 105k on it gl to ya fvillota

11-16-2009, 06:20 AM	#9 (permalink)
Bak@EMSPowered Banned Seller Join Date: Oct 2005 Location: Austin, TX Posts: 5,925 Thanks: 30 Thanked 193 Times in 165 Posts My Google Map iTrader Rating: (49/93% )	A junk yard may be your best bet. Just find a Camry and buy the engine out of it.

11-16-2009, 12:57 PM	#12 (permalink)
djskorch djskorch Join Date: Feb 2007 Location: Idaho Posts: 634 Thanks: 5 Thanked 25 Times in 23 Posts My Google Map iTrader Rating: (6/100% )	ive got a complete block minus head(has all accessories and sensors ect) with a spun bearing.it is a 94 so id does have the knock sensor. i dont know if you looking for one to rebuild or a running one but its yours if you want it for 50 plus shipping. let me know

11-21-2009, 11:11 PM	#17 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	u guys arent gonna belive this but i cant find a f-ing 5sfe in any junk yard down here. everyone trys to sell me a 3sfe. wtf?!?!

11-24-2009, 09:30 AM	#18 (permalink)
DangerousType 2wicked and Beyond! Join Date: Oct 2009 Location: Queens, NY Posts: 186 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/67% )	Hard to believe your unable to find a 5sfe block in a junkyard. Just save your money up for a better installment..even if you manage to obtain a 5sfe, you still will have to perform a headgasket, waterpump,timing belt,etc just to have a decent motor running with no issues..I know how it feels to be out of a 2 but from my experience was to get a 3sgte did not change anything, drop the sucker in and couple months the motor is out the car out for rebuild..

11-24-2009, 10:02 AM	#19 (permalink)
muffinman U-P-G-R-A-Y-E-D-D Join Date: Jan 2008 Location: Sunny South Florida Posts: 5,880 Thanks: 53 Thanked 283 Times in 272 Posts Blog Entries: 1 My Google Map iTrader Rating: (2/100% )	Mike i see tons of 5sfe's (Celicas) all the time at the junkyard in Broward.