WTB: NEW OR USED TURBO UPGRADE KIT.

satak528 · 01-01-2010, 06:21 PM

I HAVE A 1993 TURBO WITH A CT26...I AM LOOKING TO UPGRADE BUT NOT BREAK THE BANK. I WAS LOOKING AT GREDDY TD06, ATS CT27 OR SIMILAR...

MY GOAL (NOT MECHANICALLY SAVVY) IS TO SQUEEZE AS MUCH JUICE OUT OF MY ENGINE WITHOUT GETTING AN EMS, BIGGER INJECTORS OR FUEL PUMP.

I ALREADY UPGRADED INTERCOOLER, CLUTCH, DOWNPIPE, EXHAUST, BOOST CONTROL AND A USING A GM 2 BAR MAP SENSOR...

ANY SELLERS LET ME KNOW...ANY RECOMMENDATIONS PLEASE FEEL FREE.

MY BUDGET IS A LITTLE LESS THAN 1000 FOR THE HIGH END TURBOS USED AND AROUND 5OO FOR THE OK ONES. NO EBAY STUFF THANKS

MY EMAIL IS SATAK44@AOL.COM

fvillota · 01-11-2010, 11:29 PM

i have a T3 for sale. make an offer. i have a few other turbo stuff so let me know

digitalhav0c · 01-21-2010, 11:53 AM

Quote:

Originally Posted by fvillota

i have a T3 for sale. make an offer. i have a few other turbo stuff so let me know

Sorry to Hijack your thread.

Fvillota, You don't happen to have the adapter for stock manifold to T3 by any chance?

fvillota · 01-21-2010, 01:11 PM

yea the manifold has the adapter on it.
pm me

3sgtepower · 01-21-2010, 03:42 PM

I have a t3/t4 .50trim, its for a 3rd gen but I think all it needs is a different adapter plate, good up to 500whp, that will max out your stock injectors and leave plenty of room left if you plan on upgrading injectors and ecu in the future.

Also if you have plans for making 300+whp, I have an intercooler that will meet your intercooling needs up to 600whp

Mr2OwnerSale · 05-15-2010, 08:32 PM

TD06 Sh 20 G Greddy turbo kit for sale. Paid 1500 brand new. Has less then 2k miles I would say probably even less then 1.5 k miles on it. Make your best offer. Have pictures of it. Zero Shaft play. Bolts right in. Also to be able to handle it you would need silicon couplings and tbolt clamps in which i have as well.

01-01-2010, 06:21 PM	#1 (permalink)
satak528 No Skills Join Date: Dec 2009 Posts: 32 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/100% )	WTB: NEW OR USED TURBO UPGRADE KIT. I HAVE A 1993 TURBO WITH A CT26...I AM LOOKING TO UPGRADE BUT NOT BREAK THE BANK. I WAS LOOKING AT GREDDY TD06, ATS CT27 OR SIMILAR... MY GOAL (NOT MECHANICALLY SAVVY) IS TO SQUEEZE AS MUCH JUICE OUT OF MY ENGINE WITHOUT GETTING AN EMS, BIGGER INJECTORS OR FUEL PUMP. I ALREADY UPGRADED INTERCOOLER, CLUTCH, DOWNPIPE, EXHAUST, BOOST CONTROL AND A USING A GM 2 BAR MAP SENSOR... ANY SELLERS LET ME KNOW...ANY RECOMMENDATIONS PLEASE FEEL FREE. MY BUDGET IS A LITTLE LESS THAN 1000 FOR THE HIGH END TURBOS USED AND AROUND 5OO FOR THE OK ONES. NO EBAY STUFF THANKS MY EMAIL IS SATAK44@AOL.COM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-11-2010, 11:29 PM	#2 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	i have a T3 for sale. make an offer. i have a few other turbo stuff so let me know

01-21-2010, 01:11 PM	#4 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	yea the manifold has the adapter on it. pm me

01-21-2010, 03:42 PM	#5 (permalink)
3sgtepower Banned Seller Join Date: Feb 2006 Posts: 1,574 Thanks: 6 Thanked 38 Times in 34 Posts iTrader Rating: (2/75% )	I have a t3/t4 .50trim, its for a 3rd gen but I think all it needs is a different adapter plate, good up to 500whp, that will max out your stock injectors and leave plenty of room left if you plan on upgrading injectors and ecu in the future. Also if you have plans for making 300+whp, I have an intercooler that will meet your intercooling needs up to 600whp

05-15-2010, 08:32 PM	#6 (permalink)
Mr2OwnerSale No Skills Join Date: May 2010 Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	TD06 Sh 20 G Greddy turbo kit for sale. Paid 1500 brand new. Has less then 2k miles I would say probably even less then 1.5 k miles on it. Make your best offer. Have pictures of it. Zero Shaft play. Bolts right in. Also to be able to handle it you would need silicon couplings and tbolt clamps in which i have as well.