Program the OEM remote

drrel · 08-24-2008, 02:18 PM

I've obtained a remote for my 2002 MR2 after losing the original and am looking for instructions on programing it. Please help. Thanks,DRREL.

lbridges · 08-24-2008, 03:20 PM

I could cut & paste, but you might as well go there so the folks who originally posted it get the credit.

supunna_picta · 08-24-2008, 11:14 PM

One more fun one for you if you're interested - unlock both doors with one keypress. I've had this for years, don't know who I bummed it from but they get credit.

Keyless Entry – both locks, one button press

A. Preparation

1. Sit in drivers seat for the following procedures.
2. Only use the ‘Master Key’ for this.
3. Open the Driver's Door only.
4. Remove the Key from the Ignition Switch.
5. A stopwatch is not necessary, but would be helpful to keep track of time. Set it for 40 seconds.

Note: All of the following procedures in sections B and C must be completed within 40 seconds.

B. Programming Procedure.

0. If you have a stopwatch to keep track of time, start it.
1. Insert the Key into, and remove the Key from the Ignition Switch 2 times.
2. Close, then open the Driver's Door 2 times.
3. Insert the Key into, and remove the Key from the Ignition Switch 1 time.
4. Close, then open the Driver's Door 2 times.
5. Insert the Key into the Ignition and leave it in.
6. Close the Driver's Door.
7. Turn the Key from 'Lock' to 'On' 4 times (ending at 'Lock').
8. Remove the Key from the Ignition Switch.
9. The tail and sidemarker lights will flash 4 times and the peizo will chirp 4 times. The Doors will lock and unlock 4 times. If this does not happen, start over. If the chirps are heard go on to the next procedures in C. Keep track of time! By now you should be down to the last 5 seconds.

C. Selecting the Operating Mode.

1. Press and release both 'Lock '& 'Unlock' on the remote at the same time.

Choose one of the following.( 2a or 2b)
2a. (Modified setting) Press and release the 'Unlock' button once ‘For All Doors To Unlock’.
Or
2b. (Orig. Factory Setting) Press and release the 'Lock' button once ‘For Driver's Door To Unlock Only’.

3. The tail and marker lights flash 1 time and the peizo chirps 1 time.
4. The doors will lock and unlock 1 time. (If it locks twice, start over.)
5. Open the Driver's Door. The programming of your new keyless entry setting is now complete!

08-24-2008, 02:18 PM	#1 (permalink)
drrel No Skills Join Date: Aug 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Program the OEM remote I've obtained a remote for my 2002 MR2 after losing the original and am looking for instructions on programing it. Please help. Thanks,DRREL.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-24-2008, 03:20 PM	#2 (permalink)
lbridges No Skills Join Date: Jul 2006 Location: East Central FLA Posts: 144 Thanks: 1 Thanked 12 Times in 12 Posts iTrader Rating: (0/0% )	I could cut & paste, but you might as well go there so the folks who originally posted it get the credit.

08-24-2008, 11:14 PM	#3 (permalink)
supunna_picta No Skills Join Date: Mar 2006 Location: Denver, CO Posts: 222 Thanks: 2 Thanked 23 Times in 22 Posts My Google Map iTrader Rating: (0/0% )	One more fun one for you if you're interested - unlock both doors with one keypress. I've had this for years, don't know who I bummed it from but they get credit. Keyless Entry – both locks, one button press A. Preparation 1. Sit in drivers seat for the following procedures. 2. Only use the ‘Master Key’ for this. 3. Open the Driver's Door only. 4. Remove the Key from the Ignition Switch. 5. A stopwatch is not necessary, but would be helpful to keep track of time. Set it for 40 seconds. Note: All of the following procedures in sections B and C must be completed within 40 seconds. B. Programming Procedure. 0. If you have a stopwatch to keep track of time, start it. 1. Insert the Key into, and remove the Key from the Ignition Switch 2 times. 2. Close, then open the Driver's Door 2 times. 3. Insert the Key into, and remove the Key from the Ignition Switch 1 time. 4. Close, then open the Driver's Door 2 times. 5. Insert the Key into the Ignition and leave it in. 6. Close the Driver's Door. 7. Turn the Key from 'Lock' to 'On' 4 times (ending at 'Lock'). 8. Remove the Key from the Ignition Switch. 9. The tail and sidemarker lights will flash 4 times and the peizo will chirp 4 times. The Doors will lock and unlock 4 times. If this does not happen, start over. If the chirps are heard go on to the next procedures in C. Keep track of time! By now you should be down to the last 5 seconds. C. Selecting the Operating Mode. 1. Press and release both 'Lock '& 'Unlock' on the remote at the same time. Choose one of the following.( 2a or 2b) 2a. (Modified setting) Press and release the 'Unlock' button once ‘For All Doors To Unlock’. Or 2b. (Orig. Factory Setting) Press and release the 'Lock' button once ‘For Driver's Door To Unlock Only’. 3. The tail and marker lights flash 1 time and the peizo chirps 1 time. 4. The doors will lock and unlock 1 time. (If it locks twice, start over.) 5. Open the Driver's Door. The programming of your new keyless entry setting is now complete!