FS: Monocraft GT300 Kit Replica

dutch · 01-02-2006, 05:31 AM

Cross posted from spyderchat.

I am selling my GT300 kit on ebay.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=8027031002

This kit was made for me via spyderdan, by Toysport. This is a copy of Dans original gt300 kit (99 of 100 I believe). I was told by Dan, the kit already fit better than the original and the fiberglass was layed on thicker than the original.

The kit was installed on my vehicle for a short period of time. They kit does have a lot of work done to it already. Many of the imperfections where taken out with material added or removed in spots.

I received the kit from Toysport with some of the mounts damaged as you can see in the pictures. You can also see in the pictures where various spots where filled or shaved to remove the imperfections.

I decided remove the kit. After installation, I realised the kit would not hold up to the kind of driving I would be doing. Fiberglass just isn't strong enough to hold up for the auto cross, track days and road trips I plan on doing. Hitting a cone wouldn't be good.

Pictures of the kit:

Pictures of it on the car (sorry about the quality):

Additional pictures:

http://northwestmr2.com/incoming/dut...der/gt300_kit/

danielmr2 · 01-02-2006, 01:48 PM

looks good. Never seen that kit before.

01-02-2006, 05:31 AM	#1 (permalink)
dutch No Skills Join Date: Feb 2005 Location: Maple Ridge Posts: 37 Thanks: 0 Thanked 8 Times in 6 Posts My Google Map iTrader Rating: (0/0% )	FS: Monocraft GT300 Kit Replica Cross posted from spyderchat. I am selling my GT300 kit on ebay. http://cgi.ebay.com/ebaymotors/ws/eB...tem=8027031002 This kit was made for me via spyderdan, by Toysport. This is a copy of Dans original gt300 kit (99 of 100 I believe). I was told by Dan, the kit already fit better than the original and the fiberglass was layed on thicker than the original. The kit was installed on my vehicle for a short period of time. They kit does have a lot of work done to it already. Many of the imperfections where taken out with material added or removed in spots. I received the kit from Toysport with some of the mounts damaged as you can see in the pictures. You can also see in the pictures where various spots where filled or shaved to remove the imperfections. I decided remove the kit. After installation, I realised the kit would not hold up to the kind of driving I would be doing. Fiberglass just isn't strong enough to hold up for the auto cross, track days and road trips I plan on doing. Hitting a cone wouldn't be good. Pictures of the kit: Pictures of it on the car (sorry about the quality): Additional pictures: http://northwestmr2.com/incoming/dut...der/gt300_kit/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-02-2006, 01:48 PM	#2 (permalink)
danielmr2 Que Paso? Join Date: Mar 2005 Location: So Cal, 562 Posts: 109 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	looks good. Never seen that kit before.