FS: KW Var 3 Coilovers for ZZW30

mightydunc · 04-04-2009, 10:34 PM

Hello all,

My first post on here, but I'm also on the spyderchat.com and MR2OC.com forums under the same user name and on EBay as MR2DUNC. Up for sale is a set of KW Var 3 coilovers.

These have NOT been used but they are not "brand new". As an experiment, they were mounted to an AW11. To accomodate this, an extra hole had to be drilled on the front coilovers. Once they were mounted, they were found to be far too short and were then removed. Hence they're a bit grimy and have the extra hole but are otherwise unused. The additional hole that was drilled is shown in the third picture. It overlaps the bottom hole but it is smaller, hence there's no chance of the larger bolt used on the ZZW30 slipping into it. As an additional point, the coilover bodies are made of a very strong, high quality stainless steel (the machinist had to use a special bit to drill the additional hole...), as opposed to the aluminum commonly used the cheapy coilovers.

For the reasons mentioned above, the price will be $1000 USD (about $1150 CAD at the current exchange rate) OBO. These are currently located in Canada (Manitoba, R0K 2A0) and I'll ship anywhere. That's a set of OEM quality (German TUAV approved and OE on the Viper ACR), double adjustable, stainless steel, rebuildable coilovers, for the price of the common junk coilovers...

Clicky for pics!

mightydunc · 05-09-2009, 09:36 PM

Price drop bump

mightydunc · 07-01-2009, 01:23 PM

Back from the dead, the zombie coilovers live on! Oh, and a price drop.

mightydunc · 03-21-2010, 08:55 PM

Spring thaw bump! Get something nice for your Spyder this summer

04-04-2009, 10:34 PM	#1 (permalink)
mightydunc No Skills Join Date: May 2007 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	FS: KW Var 3 Coilovers for ZZW30 Item Location: Manitoba, Canada (R0K 2A0) Hello all, My first post on here, but I'm also on the spyderchat.com and MR2OC.com forums under the same user name and on EBay as MR2DUNC. Up for sale is a set of KW Var 3 coilovers. These have NOT been used but they are not "brand new". As an experiment, they were mounted to an AW11. To accomodate this, an extra hole had to be drilled on the front coilovers. Once they were mounted, they were found to be far too short and were then removed. Hence they're a bit grimy and have the extra hole but are otherwise unused. The additional hole that was drilled is shown in the third picture. It overlaps the bottom hole but it is smaller, hence there's no chance of the larger bolt used on the ZZW30 slipping into it. As an additional point, the coilover bodies are made of a very strong, high quality stainless steel (the machinist had to use a special bit to drill the additional hole...), as opposed to the aluminum commonly used the cheapy coilovers. For the reasons mentioned above, the price will be $1000 USD (about $1150 CAD at the current exchange rate) OBO. These are currently located in Canada (Manitoba, R0K 2A0) and I'll ship anywhere. That's a set of OEM quality (German TUAV approved and OE on the Viper ACR), double adjustable, stainless steel, rebuildable coilovers, for the price of the common junk coilovers... Clicky for pics! Last edited by mightydunc; 07-01-2009 at 01:22 PM.. Reason: Price drop

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-09-2009, 09:36 PM	#2 (permalink)
mightydunc No Skills Join Date: May 2007 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Price drop bump

07-01-2009, 01:23 PM	#3 (permalink)
mightydunc No Skills Join Date: May 2007 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Back from the dead, the zombie coilovers live on! Oh, and a price drop.

03-21-2010, 08:55 PM	#4 (permalink)
mightydunc No Skills Join Date: May 2007 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Spring thaw bump! Get something nice for your Spyder this summer