20V: 20V (ST) Parts... where?

[sandsz]

Hello people! My MR2 SilverTop swap went smoothly but I've run into a problem... I need a distributor cap! Kind of hard to find a Levin's cap in the US unfortunetly, on the East Coast doubly so! So I'm asking around, as anyone run across the same problem? The Ignition Rotor is a dime a dozen, wires can me bought and used from several different cars, but the cap is apparently GOLD.

So I looked up some parts and asked some people and the best I could come up with is the following caps that match up with the distributor and ignition rotor as far as clearences go, but all of them have 2 instead of 3 mount holes to screw them in.

Here is what I have (From Discount Auto Parts web site, verified with ROCK auto lookup side):

1991 Toyota Celica GT - 2.2L 5SFE
ACDELCO US
CAP
E382 - 11-89 / 1991-1991
E356D - 1990-1991


1993 MR2 2.0 Turbo 3SGTE
ACDELCO
CAP
E395C - 1991-1993

STANDARD MOTOR PRODUCTS
JH-196 - 1993-1995

I think there was a few more that fit the bill and I asked MR220V and he said he was able to modify one of these so let me know what you guys have done or suggest!

And yes, I will order one from Toyota and hopefully get it within the next ... YEAR. *SIGH*

[mr220v]

Here is the part number for the distributor cap:

19101-16010

I ran the number on one of these toyota parts sites, and they had a listing, so it looks like something you can just order.

Call Lithia Toyota, they should have it.

800-888-6305

[sandsz]

Ok awesome, I found that the MR2 second gen wires work well, the distributor cap I found in stock at Toyota of Roswell (at their warehouse) but its expensive !! $50. Ignition rotor is a dime a dozen.

Sweetness! I also found out what my problem was with a skipping #2 cyl. I'll put it in my other post!