![]() |
|
|
|
#1 (permalink) |
|
vroooom!!,,piish
Join Date: Jun 2007
Location: Fort Worth, Texas
Posts: 250
Thanks: 16
Thanked 3 Times in 3 Posts
iTrader Rating: (21/96% ) |
Has any one had any problems with the altinator not charging the battery after a JDM 2nd gen swap. Ive done usdm swaps before but not the J- spec. I have swaped out the alt. with a high amp 5sfe alt. but still no charge. The 5s alt. is only 1 year old. I guess Ill bust out the old multi meter if nobody has any advice. Any info couldnt hurt.
![]() |
|
|
|
|
|
#2 (permalink) |
|
Dreaming of apexes
Join Date: Aug 2005
Location: Minneapolis, MN
Posts: 5,313
Thanks: 139
Thanked 296 Times in 264 Posts
Blog Entries: 4
My Google Map iTrader Rating: (7/100% ) |
If you want to take it to Sears and have them run a charging system diagnostic they can probably tell you where the fault lies.
|
|
|
|
|
|
#3 (permalink) |
|
vroooom!!,,piish
Join Date: Jun 2007
Location: Fort Worth, Texas
Posts: 250
Thanks: 16
Thanked 3 Times in 3 Posts
iTrader Rating: (21/96% ) |
The only problem with that is Im still working on the front end, Not inspected, not completely put back together, and no plates. But that is a great idea. Any other suggestions?
I have the Toyota manual. Im going to disect the Alt. and electrical system tomarrow after I charge the battery. Honestly I was hopeing someone had this problem with the J-spec swap. As well as hoped it was some silly wire needing spliced or cut such as some others like the air bag line. . Thanx though!!! |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|