20V MK1 Engine Swap Comparison information

Raptor13x · 07-08-2008, 10:48 PM

Here's some comparison information I pulled off another site:

Silvertop vs Blacktop OEM Flywheel
15.45Lbs vs 13.30Lbs

Vacuum Setup

ST vs BT Rods

BT Rod Weights

tjmr2 · 07-11-2008, 01:00 AM

Thanks Raptor, while my BT is running it looks like my vacuum lines may not all be connected correctly. You are doing a great job with your install, it's a huge project that isn't for the faint of heart.

Don't be discouraged by the 101 things that seem to threaten to derail the project. It will come together and be worth it.

Raptor13x · 07-11-2008, 01:22 AM

Thanks. I got a lead on a whole set of the wiring I need, plus coil, igniter, etc- everything I should need to get me up and running, so once that gets here I'll be golden. I'm excited.

07-08-2008, 10:48 PM	#1 (permalink)
Raptor13x Legendary Join Date: Apr 2006 Location: Farmington Hills, MI Posts: 3,997 Thanks: 7 Thanked 44 Times in 37 Posts My Google Map iTrader Rating: (5/100% )	Comparison information Here's some comparison information I pulled off another site: Silvertop vs Blacktop OEM Flywheel 15.45Lbs vs 13.30Lbs Vacuum Setup ST vs BT Rods BT Rod Weights

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-11-2008, 01:00 AM	#2 (permalink)
tjmr2 Cage Fighter Join Date: Jan 2008 Location: Colorado Posts: 409 Thanks: 0 Thanked 62 Times in 59 Posts My Google Map iTrader Rating: (0/0% )	Thanks Raptor, while my BT is running it looks like my vacuum lines may not all be connected correctly. You are doing a great job with your install, it's a huge project that isn't for the faint of heart. Don't be discouraged by the 101 things that seem to threaten to derail the project. It will come together and be worth it.

07-11-2008, 01:22 AM	#3 (permalink)
Raptor13x Legendary Join Date: Apr 2006 Location: Farmington Hills, MI Posts: 3,997 Thanks: 7 Thanked 44 Times in 37 Posts My Google Map iTrader Rating: (5/100% )	Thanks. I got a lead on a whole set of the wiring I need, plus coil, igniter, etc- everything I should need to get me up and running, so once that gets here I'll be golden. I'm excited.