Toyota MR2 Message Board

 

Home MR2.com Forum Rules Chat Garage Links Map Showcase Sponsors
Go Back   Toyota MR2 Message Board > Toyota MR2 Generations > MK 1 MR2 - AW11 > MK1 Engine Talk, Modifications, and Swaps

Reply
 
LinkBack Thread Tools Display Modes
Old 10-18-2008, 09:08 AM   #1 (permalink)
SUPERcharZed ToyZ RacZer
Donation Level 3 
 
mr2tim's Avatar
 
Join Date: Mar 2008
Location: South Florida
Posts: 1,789
Thanks: 8
Thanked 118 Times in 111 Posts

My Google Map



Wink FS 85-89 Mark 1 Parts

Mrs. Claus has asked Santa to clean up the workshop for her Christmas Toy production, them nasty Eleves have no place to work.

Here's some Xmas gift ideas for that someone special.

(You pay for shipping from South Florida, 33428.)
Santa takes PayPal, Checks and Money orders!! mr2tim
-----------------------------------------------
Complete 4a-ge engine $500
Clutch Assembly w OEM disc $110
Clutch Assembly w Stage 2 street disc $130
C-52 5 Speed Transmission Complete $400
c-52 5 Speed Transmission Case and 1-4 Gears (only) $200
4a Engine series Intake Manifolds $100
4a Engine Series L&R Valve Covers $30 ea
4a Engine Series A/C comp holders $20
4a A/C Compressors (rebuildable only) $40
4a Engine Series N/A Water Inlets $30
N/A Throttle Assemblies $60 ea
4a-gze Stripped Block $170
4a-ge N/A Cast Crankshaft (requires machining) $60
4a-gze Supercharged Forged Crankshaft (damaged front threads, requires machining) $75
4a-gze Supercharged Intake Manifold $110
4a-gze Supercharged Vacuum loom $40
4a-ge N/A Vacuum Loom $35
4a-ge N/A Coil w Igniter $90
4a-ge N/A Crankshft Pulley $60
4a-ge N/A Belt Tensioners $35 (w wheel)
4a-ze A/C Comperssor stator $45
4a-gze Supecharger Clutch Stator (new!) $260
4a-gze Supercharged Fuel Rail $30
4age N/A Complete Fuel Rail Assembly $35
86 Air Flow Meter -$70
87 Air Flow Meter? (picture available) $70
88-89 4a-gze Supercharged Blow-off Valve Holder $35
88-89 4a-gze Supercharged Throttle Cable Mounting Plate $25
85-89 4a-ge Oil Pump $65
85-89 4a-ge EGR Assembly $50
85-89 4a-ge N/A Rear Crankshaft Seal
85-89 4a-ge 3 point Throttle Cable Mounting Plate
88-89 4a-gze EGR Valve only $35
88-89 4agze Cold Start Holder/Adaptor $20
OEM Cam Pulleys $10 ea
4a-engine series Distributor $100
89-89 4a-gze Throttle Assembly (NO TPS) $60
--------------------------------------------------------------
85-86 L&R Rear Axle Carriers/Hubs-Complete Assemblies $60 ea
85-86 L&R Half Shafts for Automatic Transmissions $50 ea
85-86 L&R Rear Suspension Lower Control Arms $30 ea
85-86 L&R Rear Strut Rods $25 ea
85-86 L&R Rear Suspension Arms $30 ea (Tow in adjusters)
85-86 L&R Rear Calipers w Emer Brake Gear $30 ea
85-86 L&R Rear McPherson Struts, Automatic Transmissions $50 ea
85-86 L&R Front Axle Carriers/Hubs-Complete Assemblies $70 ea
85-86 L&R Front Strut Rods $25
85-86 Rack and Pinion Steering Assembly $125
85-86 L&R Front Suspension Lower Control Arms $30 ea
85-86 L&R Front Calipers $25 ea
85-86 L&R Front McPherson Struts, Automatic Transmissions $50
85-86 Dash Pod w A/T switch, Complete $110
Dashboard, Blue Vinyl, $90 (perfect)
Clock(s) $35
85-86 Center A/C Vent $30
Dashbord located Side A/C vents $20 ea
85-86 L&R Headrests, Grey $25 ea (perect)
85-86 L&R Manual Doors $125 ea
85-86 L&R Rear Light Assemblies $60 ea
85-86 L&R Sunvisors, Grey fabric (perfect) $45 ea
85-86 A/T Console, Black,very nice condition $90
85-86 Temp Control Assembly $80

L&R Rear Fenders $110 ea
87-89 L&R Electric Doors, Blue Fabric Interiors, No switches, w Glass $250ea ea, Complete w Electric Mirrors and OEM Harnesses

87-89 L&R Rear Axle Carriers/Hubs-Complete Assemblies $60 ea
87-89 L&R Half Shafts for Manual Transmissions $50 ea
87-89 L&R Rear Suspension Lower Control Arms $30 ea
87-89 L&R Rear Strut Rods $25 ea
87-89 L&R Rear Suspension Arms $30 ea (Tow in adjusters)
87-89 L&R Rear Calipers w Emer Brake Gear $30 ea
87-89 L&R Rear McPherson Struts, Manual Transmissions $50 ea
87-89 L&R Front Axle Carriers/Hubs-Complete Assemblies $70 ea
87-89 L&R Front Strut Rods $25 ea
87-89 Rack and Pinion Steering Assembly $125
87-89 L&R Front Suspension Lower Control Arms $30 ea
87-89 L&R Front Calipers $25 ea
87-89 L&R Front McPherson Struts, Manual Transmissions $50 ea
87-89 L&R Rear Suspension Body Mounting Assembly $35 ea

87-89 L&R Blue Fabric Seats (A-1 condition) $125 ea
Windshield plastic Grills $15 ea
Wiper Linkages $30
Wiper Motors $30
M/T shifter cables $40 ea
A/T shifter cable $40
Hood Latches $20
Trunck Latches $20
Engine Cover Latches $15
L&R Engine Bay Side trim Covers $30 ea
L&R Complete A&B Pillars trim Assemblies (whole only) $90 ea
L&R Quarter window Trims (whole only) $40 ea
L&R Front Turn Signals (whole only) $25 ea
L&R Interior Foot trims Covers (blue only) $15 ea
Heater/Blower fans $40 ea
Exhaust Downpipes $50 ea
Complete Fuel pump Holder Assembly $40
Complete Fuel Sender Assembly $40
Manual Transmission Dash Pods Complete $110
Manual Transmission Dash Pods, Plastic Shell only $45
OEM Carpet, Blue $60, both(used)
OEM Carpet, Black $1, both (real nice)
OEM Rear Carpet Assembly, Black (perfect condition), (never wet) $75
Engine Cooling Fans $40
N/A rubber Intake Snorkel $35
Front Sway Bars $50
Rear Sway Bars $50
87-89 M/T console, Blue $90
87-89 M/T, console, Blue $120 (perfect)
N/A speedometers $90 (several)
87-89 Temp Controls $75
87-89 Side Spoilers, Fiberglass (both-4 pieces only) $125
M/T Shifter Asembly $45
OEM Oil coolers $35
Used Door Hinges $45 (sets only)
L&R Headlight Assemblies $135 (whole only)
L&R Headlights (metal section only) $60
Front Shock Tower Braces $30
Heater Cores $50
Complete Heater Core Assembly $75
87-89 L&R Electric Mirrors $75 ea
Right Manual Door Mirror, Black $45
Rear Trunck Lids 85-87 Standard Bulb Light Type $80
Engine Cover, Steel only $75
Standard Hood $130
Racing Hood, Vented for brake cooling $75
Front Race Bumper,no reinforcement, w/Upper Radiator Support, Very Lightweight $125
Upper Radiator Support $80
AC & Rad Cooling Fans-$60 ea
Various (Front) A/C Condensers (pictures available) $90 ea
2 tier Front grill $45
3 tier Front grill $45
N/A Front Brake Rotors, vented $35
N/A Rear Brake Rotors $30
Lots of OEM Cooling Hoses
Passenger Side, Electric Door Switches $40
A/C Compressor Hook-up Hoses $20
Sunroof Glass (Roof Glass) $90
Sunroof Glass Hardware $30
Front Trunck mounted heater switch assembly $30
Used Motor Mounts $15

Happy Holiday Motoring!!

mr2tim
Supercharzed Toyz
A Toyota Race Team since 1989
Rear Console Compartment, Blue $15
Rear Console Compartment, Black $15
Rear Mud Flaps $25 ea
mr2tim is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
The Following User Says Thank You to mr2tim For This Useful Post:
esreveRBackwards (07-08-2009)
Old 01-15-2009, 01:13 AM   #2 (permalink)
Shihan70
 
Join Date: Jan 2009
Location: Cushing,Ok
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts





Send a message via Yahoo to Shihan70
Question Blue Mr2 parts?

I own a blue 1989 Mr2 t-top and need a blue door with window motor and regulator in it?Google says ya own 2 doors....that be correct?
Shihan70 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-15-2009, 04:19 AM   #3 (permalink)
No Skills
 
Join Date: Jan 2009
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts





cool i need Throttle Cable and the usdm alternator bracket upper and lower i need this asap plz delroy109@msn.com thnks
delroy109 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-19-2009, 01:10 PM   #4 (permalink)
SUPERcharZed ToyZ RacZer
Donation Level 3 
 
mr2tim's Avatar
 
Join Date: Mar 2008
Location: South Florida
Posts: 1,789
Thanks: 8
Thanked 118 Times in 111 Posts

My Google Map



Blue doors

Yes, I have L&R electric doors, complete except for drs door switch. It has the 87-89 blue interior fabric and white exterior. Do you need the glass?, Mirror and inner panel?

I'm in Florida and I guess that your in the middle in OK?

ps the pics are from my Racecar which has the exact same doors but have different Toyota mirrors (Celica actually)

Quote:
Originally Posted by Shihan70 View Post
I own a blue 1989 Mr2 t-top and need a blue door with window motor and regulator in it?Google says ya own 2 doors....that be correct?
Attached Thumbnails
fs-85-89-mark-1-parts-drs-door.jpg   fs-85-89-mark-1-parts-pass-door-seat.jpg  
mr2tim is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-22-2009, 02:10 PM   #5 (permalink)
Cage Fighter
 
Join Date: May 2008
Posts: 840
Thanks: 75
Thanked 64 Times in 60 Posts





MR2 Tim

I have hood pins sticking through my engine lid. My only excuse is the hillbillies that live around me made me think that hood pins are acceptable. That and the fact that I am half hillbilly myself.

So what I need is: a cable piece for the engine lid latch.

Can you help a fella out?

Last edited by Jackstand Queen; 01-23-2009 at 05:20 PM.. Reason: found latch piece in parts bin
Jackstand Queen is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-27-2009, 09:13 PM   #6 (permalink)
SUPERcharZed ToyZ RacZer
Donation Level 3 
 
mr2tim's Avatar
 
Join Date: Mar 2008
Location: South Florida
Posts: 1,789
Thanks: 8
Thanked 118 Times in 111 Posts

My Google Map



Hey Queenie!!

I've got a few N/a cables I'm not sure if they interchange with the S/C cars.

If your cool with that suggest a price?

Tim

PS that super modified, super tweaked, high tuned exotic car still on the road regularly?



Quote:
Originally Posted by Jackstand Queen View Post
MR2 Tim

I have hood pins sticking through my engine lid. My only excuse is the hillbillies that live around me made me think that hood pins are acceptable. That and the fact that I am half hillbilly myself.

So what I need is: a cable piece for the engine lid latch.

Can you help a fella out?
mr2tim is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-28-2009, 03:25 AM   #7 (permalink)
Cage Fighter
 
Join Date: May 2008
Posts: 840
Thanks: 75
Thanked 64 Times in 60 Posts





I sent you an email in reply. No need to bore the other thread users with my trivia.
Jackstand Queen is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 02-13-2009, 08:41 PM   #8 (permalink)
No Skills
 
Join Date: Feb 2009
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post

My Google Map



Mr2tim,
I need the interior A and B pillar trim pieces are for a t-top model, or are they interchangeable between t-top and sunroofs? I need them in blue if ya got them. Also, have you a front air dam? thanks
Bennie is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 02-18-2009, 10:48 PM   #9 (permalink)
SUPERcharZed ToyZ RacZer
Donation Level 3 
 
mr2tim's Avatar
 
Join Date: Mar 2008
Location: South Florida
Posts: 1,789
Thanks: 8
Thanked 118 Times in 111 Posts

My Google Map



"A's & "B's"-the scoop

Hey Ben,

Well, Yes and No. Yes, the hard trim pieces are the same. No, the rubber items are different.

The sunroof cars have wrap--around rubber between the A and B and overhead, all one piece and a bitch to install.

The cars we crashed last year were N/A street cars with hardtops and sunroofs. (These are the same configuration).

If this answers your questions? and if you still want pictures to confirm, just ask I'll send them along OK?

I do have blue trim pieces for the quarter window interior and maybe the interior A?, I'd have to check the attic, just ask.

If your lookin' to replace just rubber I'd advise going new, as 20 yr old rubber is 20 year old rubber ya dig?

Has your car been crashed/trashed or are you customizing? Just curious.

I sold both front air dams at the tail end of 08 sorry.

PS You might send along a email address for the pictures, I don't always see the "attachment" button on the club email system and I'm NOT the brightest with computers.(What part of the country do you live)

Tim
Supercharzed Toyz Race Team



Quote:
Originally Posted by Bennie View Post
Mr2tim,
I need the interior A and B pillar trim pieces are for a t-top model, or are they interchangeable between t-top and sunroofs? I need them in blue if ya got them. Also, have you a front air dam? thanks
Attached Thumbnails
fs-85-89-mark-1-parts-b-pillars-exterior.jpg B Pillars-exterior.jpg
Views:	35
Size:	93.2 KB
ID:	7612   fs-85-89-mark-1-parts-b-pillar-trim-exterior.jpgB Pillar Trim-exterior.jpg
Views:	29
Size:	108.9 KB
ID:	7613   fs-85-89-mark-1-parts-b-pillar-trim-interior.jpg   fs-85-89-mark-1-parts-rr-spkr-interior.jpg  
mr2tim is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 02-19-2009, 09:36 PM   #10 (permalink)
No Skills
 
Join Date: Feb 2009
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts





Im in vegas and i have an 86 mr2 that hit the curb at around like 30 and now it rubs on the wheel well. I'm assuming i need the lower left control arm up front from you and asap. any help is greatly appreciated.

Last edited by lvrider; 02-19-2009 at 09:53 PM..
lvrider is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 02-24-2009, 09:52 PM   #11 (permalink)
SUPERcharZed ToyZ RacZer
Donation Level 3 
 
mr2tim's Avatar
 
Join Date: Mar 2008
Location: South Florida
Posts: 1,789
Thanks: 8
Thanked 118 Times in 111 Posts

My Google Map



Curb hopping in Vegas?

Been watching those lovely curbside girls there in Vegas Huh?
Can't blame ya.

If this is Colton you probably have a correctly addressed invoice finally, if this isn't Colton then I've been hoodwinked before.

I've still got several arms for front and rear applications.

Be sure your alignment mechanic knows this is a repaired car soas he will carefully spend a little more time to tweak your car top perfection. Make sure the thrust angle is addressed also.

mr2tim






Quote:
Originally Posted by lvrider View Post
Im in vegas and i have an 86 mr2 that hit the curb at around like 30 and now it rubs on the wheel well. I'm assuming i need the lower left control arm up front from you and asap. any help is greatly appreciated.
Attached Thumbnails
fs-85-89-mark-1-parts-front-axle-pieces.jpg   fs-85-89-mark-1-parts-front-axle-assembly.jpg  
mr2tim is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 04-15-2009, 02:57 PM   #12 (permalink)
aeronautical engineer
 
shawtech's Avatar
 
Join Date: Feb 2009
Location: Boulder , CO/ Quani , RI
Posts: 47
Thanks: 0
Thanked 0 Times in 0 Posts





Send a message via AIM to shawtech
looks like this
shawtech is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-16-2009, 04:03 PM   #13 (permalink)
Cage Fighter
 
Mr.Baca's Avatar
 
Join Date: Jun 2009
Posts: 180
Thanks: 8
Thanked 1 Time in 1 Post





Quote:
Originally Posted by mr2tim View Post
Mrs. Claus has asked Santa to clean up the workshop for her Christmas Toy production, them nasty Eleves have no place to work.

Here's some Xmas gift ideas for that someone special.

(You pay for shipping from South Florida, 33428.)
Santa takes PayPal, Checks and Money orders!! mr2tim
-----------------------------------------------
Complete 4a-ge engine $500
Clutch Assembly w OEM disc $110
Clutch Assembly w Stage 2 street disc $130
C-52 5 Speed Transmission Complete $400
c-52 5 Speed Transmission Case and 1-4 Gears (only) $200
4a Engine series Intake Manifolds $100
4a Engine Series L&R Valve Covers $30 ea
4a Engine Series A/C comp holders $20
4a A/C Compressors (rebuildable only) $40
4a Engine Series N/A Water Inlets $30
N/A Throttle Assemblies $60 ea
4a-gze Stripped Block $170
4a-ge N/A Cast Crankshaft (requires machining) $60
4a-gze Supercharged Forged Crankshaft (damaged front threads, requires machining) $75
4a-gze Supercharged Intake Manifold $110
4a-gze Supercharged Vacuum loom $40
4a-ge N/A Vacuum Loom $35
4a-ge N/A Coil w Igniter $90
4a-ge N/A Crankshft Pulley $60
4a-ge N/A Belt Tensioners $35 (w wheel)
4a-ze A/C Comperssor stator $45
4a-gze Supecharger Clutch Stator (new!) $260
4a-gze Supercharged Fuel Rail $30
4age N/A Complete Fuel Rail Assembly $35
86 Air Flow Meter -$70
87 Air Flow Meter? (picture available) $70
88-89 4a-gze Supercharged Blow-off Valve Holder $35
88-89 4a-gze Supercharged Throttle Cable Mounting Plate $25
85-89 4a-ge Oil Pump $65
85-89 4a-ge EGR Assembly $50
85-89 4a-ge N/A Rear Crankshaft Seal
85-89 4a-ge 3 point Throttle Cable Mounting Plate
88-89 4a-gze EGR Valve only $35
88-89 4agze Cold Start Holder/Adaptor $20
OEM Cam Pulleys $10 ea
4a-engine series Distributor $100
89-89 4a-gze Throttle Assembly (NO TPS) $60
--------------------------------------------------------------
85-86 L&R Rear Axle Carriers/Hubs-Complete Assemblies $60 ea
85-86 L&R Half Shafts for Automatic Transmissions $50 ea
85-86 L&R Rear Suspension Lower Control Arms $30 ea
85-86 L&R Rear Strut Rods $25 ea
85-86 L&R Rear Suspension Arms $30 ea (Tow in adjusters)
85-86 L&R Rear Calipers w Emer Brake Gear $30 ea
85-86 L&R Rear McPherson Struts, Automatic Transmissions $50 ea
85-86 L&R Front Axle Carriers/Hubs-Complete Assemblies $70 ea
85-86 L&R Front Strut Rods $25
85-86 Rack and Pinion Steering Assembly $125
85-86 L&R Front Suspension Lower Control Arms $30 ea
85-86 L&R Front Calipers $25 ea
85-86 L&R Front McPherson Struts, Automatic Transmissions $50
85-86 Dash Pod w A/T switch, Complete $110
Dashboard, Blue Vinyl, $90 (perfect)
Clock(s) $35
85-86 Center A/C Vent $30
Dashbord located Side A/C vents $20 ea
85-86 L&R Headrests, Grey $25 ea (perect)
85-86 L&R Manual Doors $125 ea
85-86 L&R Rear Light Assemblies $60 ea
85-86 L&R Sunvisors, Grey fabric (perfect) $45 ea
85-86 A/T Console, Black,very nice condition $90
85-86 Temp Control Assembly $80

L&R Rear Fenders $110 ea
87-89 L&R Electric Doors, Blue Fabric Interiors, No switches, w Glass $250ea ea, Complete w Electric Mirrors and OEM Harnesses

87-89 L&R Rear Axle Carriers/Hubs-Complete Assemblies $60 ea
87-89 L&R Half Shafts for Manual Transmissions $50 ea
87-89 L&R Rear Suspension Lower Control Arms $30 ea
87-89 L&R Rear Strut Rods $25 ea
87-89 L&R Rear Suspension Arms $30 ea (Tow in adjusters)
87-89 L&R Rear Calipers w Emer Brake Gear $30 ea
87-89 L&R Rear McPherson Struts, Manual Transmissions $50 ea
87-89 L&R Front Axle Carriers/Hubs-Complete Assemblies $70 ea
87-89 L&R Front Strut Rods $25 ea
87-89 Rack and Pinion Steering Assembly $125
87-89 L&R Front Suspension Lower Control Arms $30 ea
87-89 L&R Front Calipers $25 ea
87-89 L&R Front McPherson Struts, Manual Transmissions $50 ea
87-89 L&R Rear Suspension Body Mounting Assembly $35 ea

87-89 L&R Blue Fabric Seats (A-1 condition) $125 ea
Windshield plastic Grills $15 ea
Wiper Linkages $30
Wiper Motors $30
M/T shifter cables $40 ea
A/T shifter cable $40
Hood Latches $20
Trunck Latches $20
Engine Cover Latches $15
L&R Engine Bay Side trim Covers $30 ea
L&R Complete A&B Pillars trim Assemblies (whole only) $90 ea
L&R Quarter window Trims (whole only) $40 ea
L&R Front Turn Signals (whole only) $25 ea
L&R Interior Foot trims Covers (blue only) $15 ea
Heater/Blower fans $40 ea
Exhaust Downpipes $50 ea
Complete Fuel pump Holder Assembly $40
Complete Fuel Sender Assembly $40
Manual Transmission Dash Pods Complete $110
Manual Transmission Dash Pods, Plastic Shell only $45
OEM Carpet, Blue $60, both(used)
OEM Carpet, Black $1, both (real nice)
OEM Rear Carpet Assembly, Black (perfect condition), (never wet) $75
Engine Cooling Fans $40
N/A rubber Intake Snorkel $35
Front Sway Bars $50
Rear Sway Bars $50
87-89 M/T console, Blue $90
87-89 M/T, console, Blue $120 (perfect)
N/A speedometers $90 (several)
87-89 Temp Controls $75
87-89 Side Spoilers, Fiberglass (both-4 pieces only) $125
M/T Shifter Asembly $45
OEM Oil coolers $35
Used Door Hinges $45 (sets only)
L&R Headlight Assemblies $135 (whole only)
L&R Headlights (metal section only) $60
Front Shock Tower Braces $30
Heater Cores $50
Complete Heater Core Assembly $75
87-89 L&R Electric Mirrors $75 ea
Right Manual Door Mirror, Black $45
Rear Trunck Lids 85-87 Standard Bulb Light Type $80
Engine Cover, Steel only $75
Standard Hood $130
Racing Hood, Vented for brake cooling $75
Front Race Bumper,no reinforcement, w/Upper Radiator Support, Very Lightweight $125
Upper Radiator Support $80
AC & Rad Cooling Fans-$60 ea
Various (Front) A/C Condensers (pictures available) $90 ea
2 tier Front grill $45
3 tier Front grill $45
N/A Front Brake Rotors, vented $35
N/A Rear Brake Rotors $30
Lots of OEM Cooling Hoses
Passenger Side, Electric Door Switches $40
A/C Compressor Hook-up Hoses $20
Sunroof Glass (Roof Glass) $90
Sunroof Glass Hardware $30
Front Trunck mounted heater switch assembly $30
Used Motor Mounts $15

Happy Holiday Motoring!!

mr2tim
Supercharzed Toyz
A Toyota Race Team since 1989
Rear Console Compartment, Blue $15
Rear Console Compartment, Black $15
Rear Mud Flaps $25 ea
Im sort of a newbe to mr2s but i know that i need both l and r rear strut rods all i could find is bushings but no rod an u pm me if so
Mr.Baca is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-16-2009, 05:31 PM   #14 (permalink)
Cage Fighter
 
Join Date: May 2008
Posts: 840
Thanks: 75
Thanked 64 Times in 60 Posts





Strut Rods? Is there such a thing?

Maybe he meant "Strut Cartridges"?

There is such a thing as "Control Arm Rod".
Jackstand Queen is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-19-2009, 02:42 PM   #15 (permalink)
SUPERcharZed ToyZ RacZer
Donation Level 3 
 
mr2tim's Avatar
 
Join Date: Mar 2008
Location: South Florida
Posts: 1,789
Thanks: 8
Thanked 118 Times in 111 Posts

My Google Map



Rear Strut Rods too.

Techically speaking you are pretty somewhat almost kinda correct the strut rod does connect to the Lower Control Arm.

BGB RA-35

How many Mark 1 owners know where the Front Strut Rod is, and therefore what Caster is?

FA-5
mr2tim is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-04-2009, 03:59 PM   #16 (permalink)
No Skills
 
chrisr12_12's Avatar
 
Join Date: Jul 2009
Location: montreal, QC
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts





Hi,
I'm not very familiar with all thre tchnicalities but I'm told I need new engine mounts for my 86, do you have any???
chrisr12_12 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-07-2009, 06:05 PM   #17 (permalink)
SUPERcharZed ToyZ RacZer
Donation Level 3 
 
mr2tim's Avatar
 
Join Date: Mar 2008
Location: South Florida
Posts: 1,789
Thanks: 8
Thanked 118 Times in 111 Posts

My Google Map



Modified Motor Mounts

Howdy Chris,

I use a silicone modification similiar to the urethane procedure discribed to you but slightly softer to eliminate the "shocking" thru the driveline and clutch disc.

Here's my offer, you pay shipping both ways to my shop here in South Florida (approx $32) +$80, I'll send you my modified mounts (4 each) when I get your mounts back in the mail (core) I'll send you $20 via Paypal.

What I need, is to get your old set of motor mounts as the ones I'm shipping to you (modified) are the last set I have.
(They used to grow on trees. LOL!!)

BTW I checked with SE Toyota 4 new ones from the dealer are $382.

Your Call,

Tim (mr2tim)
Supercharzed Toyz Raczing

PS Here's what they look like coming out of the shop.






Quote:
Originally Posted by chrisr12_12 View Post
Hi,
I'm not very familiar with all thre tchnicalities but I'm told I need new engine mounts for my 86, do you have any???
Attached Thumbnails
fs-85-89-mark-1-parts-modified-motor-mounts-001.jpg  
mr2tim is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-08-2009, 12:11 AM   #18 (permalink)
Cage Fighter
 
Join Date: May 2008
Posts: 840
Thanks: 75
Thanked 64 Times in 60 Posts





Dang, I got to check my left/right mounts tomorrow, while the motor and tranny are still out of the car.

I did the polyeurethane DYI replacement excercise on my forward and rear mounts. Man it was hillarious, one of my makeshift casting setups developed a leak. So, I kept scooping up the leakage and pouring it back in until it solidified. LOL.! The resulting mess left a few tools and parts stuck to the bench, at odd angles. They are still there as art objects.

I'm glad someone else is doing it, besides me.
Jackstand Queen is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-08-2009, 12:17 AM   #19 (permalink)
Cage Fighter
 
traintech86's Avatar
 
Join Date: May 2009
Location: Yokosuka, Kanagawa Japan
Posts: 1,802
Thanks: 27
Thanked 47 Times in 43 Posts

My Google Map



no one has asked for the engine? what miles it got on it? pics to fresnoca86@yahoo.co.uk i am in the market and with the right miles that might be a good buy for me! also front lower control arms would be nice too!
traintech86 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-17-2009, 12:01 AM   #20 (permalink)
No Skills
 
Join Date: Jul 2009
Location: maine
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts

My Google Map



tim

ive got rust on my right rear quarter panel. ive had my mr2 for just under a year. it was parked for a maine winter so as you can imagine, it got beat up. i was hoping you had a right rear panel, both the inner and outer components as the rust is coming from the inside out. color does not matter as im painting the car before winter. its an 87

thanks
mriokrt87 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 01:05 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.1.0
Copyright © 2004-2011 - East Coast Imports, LLC
Page generated in 0.47572 seconds with 347 queries