20V MK1 Engine Swap 20 st part out with itbs

kazin1111 · 11-26-2008, 02:03 PM

ive got an entire 20v st sitting in my garage. the block is ruined due to a head bolt broken off in it. the motor ran fine for me but i forgot to change out the head bolts when i replaced the gasket. when i put them back on i used a broken torque wrench...

looking to get 100 plus shipping for the itbs. the tps sensor is already sold. i still have the a/f sensor. anything else you want shoot me some offers. if you want the block come and get it... 75 bucks. pistons and internals are fine on it.
shoot me some offers peopl i need this gone =) ive also got a 1985 red mr2 in the driveway im willing to part out as well... pics by the weekend.

GoBoGo · 01-04-2009, 10:37 PM

whats your location? interested in the block with internals how much shipped to 93706

kazin1111 · 01-04-2009, 10:58 PM

im in oklahoma. ill send the whole block on a pallet for 100 plus shipping. prolly cost 350. ill get you an exact quote if your serious.

GoBoGo · 01-05-2009, 04:52 AM

that would be nice let me know the exact price so i could see if i could afford it thanks.

Vyshino · 10-29-2009, 08:25 AM

Do you ahve the ST ECU or maybe a BT ECU?

pm me

mr2_mk1.5 · 10-30-2009, 11:59 PM

would you be willing to ship to canada, regina saskatchewan canada postal code S4N 6H3, if so how much for the itbs shipped, pm me thanks.
matt

mr3 · 11-12-2009, 12:47 PM

I need an Air flow meter pretty bad. I cannot find the correct one with the 22250-16110 part number. Let me know how much shipped to 19462 if you have it.

espguitarist33 · 11-12-2009, 01:33 PM

hey man how bout an intake manifold (to head) gasket? that 3 ply thing
shipped to 19380

Collins · 06-05-2010, 01:49 PM

The silvertop I ordered today has a broken distributor and what appears to be a cut fuel line (right along the intake manifold). My zip is 30083. Price for each/both? Thanks

hunart · 06-07-2010, 08:37 PM

I am looking for the Intake Air Control for the Silver Top. Do you have that?

Can anyone help me out here please. Greatly appreciated.

Thanks...

chrisclose · 06-17-2010, 11:13 PM

you guys DO realize he posted this about a year and a half ago right?

The ISCV is going to be a hard find.

Fuel line can be found at side2side racing

dizzy will also be hard to find, possibly rebuild it?

Collins · 06-17-2010, 11:20 PM

Dizzy has a plug completely broken off. I wouldn't deem that repairable. Oh well, the search continues. I'll check side2side for the fuel line! Thanks for the info

Kerry Phillips · 06-19-2010, 08:49 PM

Sent a PM, I suspect the Dizzy can be used/repaired.
IMHO, dissasemble the Dizzy, extend the wires outside the unit and then seal it up with some silicon sealant.

Kerry

11-26-2008, 02:03 PM	#1 (permalink)
kazin1111 Weak Skills Join Date: Feb 2008 Posts: 122 Thanks: 11 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	20 st part out with itbs ive got an entire 20v st sitting in my garage. the block is ruined due to a head bolt broken off in it. the motor ran fine for me but i forgot to change out the head bolts when i replaced the gasket. when i put them back on i used a broken torque wrench... looking to get 100 plus shipping for the itbs. the tps sensor is already sold. i still have the a/f sensor. anything else you want shoot me some offers. if you want the block come and get it... 75 bucks. pistons and internals are fine on it. shoot me some offers peopl i need this gone =) ive also got a 1985 red mr2 in the driveway im willing to part out as well... pics by the weekend.

06-07-2010, 08:37 PM	#10 (permalink)
hunart No Skills Join Date: Sep 2009 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	IAC I am looking for the Intake Air Control for the Silver Top. Do you have that? Can anyone help me out here please. Greatly appreciated. Thanks...

06-19-2010, 08:49 PM	#13 (permalink)
Kerry Phillips Cage Fighter Join Date: May 2006 Location: Chattanooga, TN area Posts: 299 Thanks: 0 Thanked 21 Times in 21 Posts iTrader Rating: (0/0% )	Dizzy Sent a PM, I suspect the Dizzy can be used/repaired. IMHO, dissasemble the Dizzy, extend the wires outside the unit and then seal it up with some silicon sealant. Kerry

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-04-2009, 10:37 PM	#2 (permalink)
GoBoGo Some Skills Join Date: Jun 2008 Location: Caloocan, Philippines Posts: 91 Thanks: 10 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	whats your location? interested in the block with internals how much shipped to 93706

01-04-2009, 10:58 PM	#3 (permalink)
kazin1111 Weak Skills Join Date: Feb 2008 Posts: 122 Thanks: 11 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	im in oklahoma. ill send the whole block on a pallet for 100 plus shipping. prolly cost 350. ill get you an exact quote if your serious.

01-05-2009, 04:52 AM	#4 (permalink)
GoBoGo Some Skills Join Date: Jun 2008 Location: Caloocan, Philippines Posts: 91 Thanks: 10 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	that would be nice let me know the exact price so i could see if i could afford it thanks.

10-29-2009, 08:25 AM	#5 (permalink)
Vyshino No Skills Join Date: Oct 2009 Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Do you ahve the ST ECU or maybe a BT ECU? pm me

10-30-2009, 11:59 PM	#6 (permalink)
mr2_mk1.5 Cage Fighter Join Date: May 2009 Location: Regina, Saskatchewan Canada Posts: 165 Thanks: 0 Thanked 10 Times in 9 Posts iTrader Rating: (1/100% )	would you be willing to ship to canada, regina saskatchewan canada postal code S4N 6H3, if so how much for the itbs shipped, pm me thanks. matt

11-12-2009, 12:47 PM	#7 (permalink)
mr3 unskilled Join Date: Jun 2008 Location: Plymouth Mtg, Pa Posts: 2,406 Thanks: 24 Thanked 98 Times in 93 Posts iTrader Rating: (7/100% )	I need an Air flow meter pretty bad. I cannot find the correct one with the 22250-16110 part number. Let me know how much shipped to 19462 if you have it.

11-12-2009, 01:33 PM	#8 (permalink)
espguitarist33 Cage Fighter Join Date: Nov 2008 Location: west chester PA Posts: 528 Thanks: 4 Thanked 7 Times in 7 Posts iTrader Rating: (2/100% )	hey man how bout an intake manifold (to head) gasket? that 3 ply thing shipped to 19380

06-05-2010, 01:49 PM	#9 (permalink)
Collins mad skills Join Date: May 2010 Location: stone mountain, ga Posts: 49 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	The silvertop I ordered today has a broken distributor and what appears to be a cut fuel line (right along the intake manifold). My zip is 30083. Price for each/both? Thanks

06-17-2010, 11:13 PM	#11 (permalink)
chrisclose Cage Fighter Join Date: Dec 2006 Location: tulsa OK Posts: 133 Thanks: 3 Thanked 2 Times in 2 Posts iTrader Rating: (2/100% )	you guys DO realize he posted this about a year and a half ago right? The ISCV is going to be a hard find. Fuel line can be found at side2side racing dizzy will also be hard to find, possibly rebuild it?

06-17-2010, 11:20 PM	#12 (permalink)
Collins mad skills Join Date: May 2010 Location: stone mountain, ga Posts: 49 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	Dizzy has a plug completely broken off. I wouldn't deem that repairable. Oh well, the search continues. I'll check side2side for the fuel line! Thanks for the info