Stock tach in AW11 with mulitcoil 4agze

defcon · 04-22-2009, 01:24 PM

Is there any way to wire up my original rpm tach to the 4agze's 4coil igniton setup. My 4agze is running Autronic ECU.

Thanks

te51levin · 04-22-2009, 04:33 PM

MSnS-Extra Hardware Manual

Drop down to "Another option for Hi Voltage output to a rev counter (rev counters that were fed from the coils -ve)" and build that circuit. Put that between the coils and the IG- wire on the diagnostic connector, which previously went to the negative side of the coil. Should work like magic...

04-22-2009, 01:24 PM	#1 (permalink)
defcon No Skills Join Date: Jun 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Stock tach in AW11 with mulitcoil 4agze Is there any way to wire up my original rpm tach to the 4agze's 4coil igniton setup. My 4agze is running Autronic ECU. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-22-2009, 04:33 PM	#2 (permalink)
te51levin LithiaToyotaParts.com Join Date: Oct 2005 Location: Copperhead Road Posts: 3,683 Thanks: 50 Thanked 323 Times in 267 Posts My Google Map iTrader Rating: (193/100% )	MSnS-Extra Hardware Manual Drop down to "Another option for Hi Voltage output to a rev counter (rev counters that were fed from the coils -ve)" and build that circuit. Put that between the coils and the IG- wire on the diagnostic connector, which previously went to the negative side of the coil. Should work like magic...