![]() |
|
|
|
#1 (permalink) |
|
Beams Owners Group
Join Date: Jul 2009
Location: Philippines
Posts: 94
Thanks: 2
Thanked 2 Times in 2 Posts
iTrader Rating: (0/0% ) |
MS-I V3 on my silvertop. Need help
So I'm already done assembling my MS-1 V3, I have not reflashed it or anything and it came from DIYAUTOTUNE.com so I guess it only has the standard code in it (Fuel Only). That;s fine with me, I just want to know how to wire it up. I have a 2nd gen. Toyota A/T 4AGE 20V silvertop engine, I'm done removing the AFM, I already have a Vacuum tap, all I need now is which wire goes which on the DB37 and my ECU? By the way I went the "b.For triggering off the coil negative terminal/points" option on the install, if that helps.
Here's what I have so far: DB37 Pins 1-2 -> GROUND (E1, E2, E01, E02) 7-> Screen 8-12 -> GROUND (E1, E2, E01, E02) 13-19 -> GROUND (E1, E2, E01, E02) 20 -> THA 21 -> THW 22 -> ??? 23 -> OX 24 -> ??? 25 -> Blank/not used 26 -> ??? 27 -> Blank/not used 28 -> ??? 29 -> Blank/not used 30 -> ??? 31 -> Blank/not used 32 -> #1 (injector) 33 -> #2 (injector) 34 -> #3 (injector) 35 -> #4 (injector) 36 -> Blank/not used 37 -> ??? for the blanks, if there should be or supposed to be something connected to it pls. do indicate as well. THANKS! ![]() |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|