Oversized S/C pulley question?

mr2tim · 10-27-2009, 02:44 PM

I'm in-process to obtain what is called the 180mm crankshaft pulley and a changed sized water pump pulley for the S/C racecar.

Do I need to look for a "revised sized" belt tensioning idler wheel to complete this installation? Or, can I expect to use my OEM setup with the revised belt?

(I ran the 10psi HKS pulley for 8 years in competition with no problems and would like to step up the output with this "new" engine.)

Thanks for your experienced response.

ToyotaTechGeek · 10-27-2009, 02:52 PM

usually the o/s pullies come with a new tensioner. there have been some discussions regarding aleternatives, but i've not had to cross that bridge.

10-27-2009, 02:44 PM	#1 (permalink)
mr2tim SUPERcharZed ToyZ RacZer Join Date: Mar 2008 Location: South Florida Posts: 1,789 Thanks: 8 Thanked 118 Times in 111 Posts My Google Map iTrader Rating: (6/100% )	Oversized S/C pulley question? I'm in-process to obtain what is called the 180mm crankshaft pulley and a changed sized water pump pulley for the S/C racecar. Do I need to look for a "revised sized" belt tensioning idler wheel to complete this installation? Or, can I expect to use my OEM setup with the revised belt? (I ran the 10psi HKS pulley for 8 years in competition with no problems and would like to step up the output with this "new" engine.) Thanks for your experienced response.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-27-2009, 02:52 PM	#2 (permalink)
ToyotaTechGeek resident GEEK! Join Date: Mar 2005 Location: ...boosting mid-corner Posts: 995 Thanks: 14 Thanked 31 Times in 31 Posts My Google Map iTrader Rating: (2/100% )	usually the o/s pullies come with a new tensioner. there have been some discussions regarding aleternatives, but i've not had to cross that bridge.