3S-GTE/Turbo MK1 Engine Advice on soon endng Turbo Manifold.

Smokestoomuch · 02-09-2010, 07:30 PM

Hello,
There is an MR2 turbo manifold that is ending tomorrow (on the 10th). It states that it for an MR2 but I have already bought one turbo manifold that will not work on an MR2 MK1, so I do not need another. I have a Garrett T25 to mount on it. Can someone advice me as to whether this will work for me? It looks like it might be rather tight between the turbo and the firewall. Here is the Ebay Item number: 130364880802
Here is the link:
Toyota Corolla Mr2 4AGE Turbo Exhaust Manifold : eBay Motors (item 130364880802 end time Feb-10-10 13:25:14 PST)
Thank you for the help.

donnyavery · 02-09-2010, 08:14 PM

that one will not work you need this one Toyota Corolla AE82 AE92 4AGE Turbo Exhaust Manifolds : eBay Motors (item 370328818102 end time Feb-10-10 20:01:57 PST)its the same one i use on my mk1

donnyavery · 02-09-2010, 08:21 PM

here two pics and with this one you can still put the stater on that side of the motor if you have to(depending on trans you have) like the other header you were looking at you'll have to ream the bolt holes and do a little work to the 4th runner closest to the trans side but you have to do that with all of them because they use the 20v flange which fits but the ports dont line up right

SnowRocker88 · 02-09-2010, 08:31 PM

If you know that little then you may want to re-think doing a DIY turbo MK1...

Smokestoomuch · 02-09-2010, 09:48 PM

I really like the JDM cast iron turbo manifold. Its real solid and your turbo wouldn't move much. I was thinking about mounting it upside down by welding an adapter plate to it. That still may leave the turbocharger in a bad spot. Think it might work?

donnyavery · 02-09-2010, 10:24 PM

i think it will hit the fire wall when the motor moves

02-09-2010, 07:30 PM	#1 (permalink)
Smokestoomuch Cage Fighter Join Date: May 2006 Location: Palm Springs, California (SoCal) Posts: 188 Thanks: 16 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (4/100% )	Advice on soon endng Turbo Manifold. Hello, There is an MR2 turbo manifold that is ending tomorrow (on the 10th). It states that it for an MR2 but I have already bought one turbo manifold that will not work on an MR2 MK1, so I do not need another. I have a Garrett T25 to mount on it. Can someone advice me as to whether this will work for me? It looks like it might be rather tight between the turbo and the firewall. Here is the Ebay Item number: 130364880802 Here is the link: Toyota Corolla Mr2 4AGE Turbo Exhaust Manifold : eBay Motors (item 130364880802 end time Feb-10-10 13:25:14 PST) Thank you for the help.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-09-2010, 08:14 PM	#2 (permalink)
donnyavery body tech Join Date: Feb 2009 Location: berwick pa 18603 Posts: 663 Thanks: 23 Thanked 19 Times in 19 Posts My Google Map iTrader Rating: (2/100% )	that one will not work you need this one Toyota Corolla AE82 AE92 4AGE Turbo Exhaust Manifolds : eBay Motors (item 370328818102 end time Feb-10-10 20:01:57 PST)its the same one i use on my mk1

02-09-2010, 08:21 PM	#3 (permalink)
donnyavery body tech Join Date: Feb 2009 Location: berwick pa 18603 Posts: 663 Thanks: 23 Thanked 19 Times in 19 Posts My Google Map iTrader Rating: (2/100% )	here two pics and with this one you can still put the stater on that side of the motor if you have to(depending on trans you have) like the other header you were looking at you'll have to ream the bolt holes and do a little work to the 4th runner closest to the trans side but you have to do that with all of them because they use the 20v flange which fits but the ports dont line up right

02-09-2010, 08:31 PM	#4 (permalink)
SnowRocker88 Tech-Nerd Join Date: Nov 2007 Location: Greenville, SC Posts: 342 Thanks: 6 Thanked 9 Times in 9 Posts My Google Map iTrader Rating: (1/100% )	If you know that little then you may want to re-think doing a DIY turbo MK1...

02-09-2010, 09:48 PM	#5 (permalink)
Smokestoomuch Cage Fighter Join Date: May 2006 Location: Palm Springs, California (SoCal) Posts: 188 Thanks: 16 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (4/100% )	I really like the JDM cast iron turbo manifold. Its real solid and your turbo wouldn't move much. I was thinking about mounting it upside down by welding an adapter plate to it. That still may leave the turbocharger in a bad spot. Think it might work?

02-09-2010, 10:24 PM	#6 (permalink)
donnyavery body tech Join Date: Feb 2009 Location: berwick pa 18603 Posts: 663 Thanks: 23 Thanked 19 Times in 19 Posts My Google Map iTrader Rating: (2/100% )	i think it will hit the fire wall when the motor moves