![]() |
|
|
|
#1 (permalink) |
|
Gen3 swap DONE!!
|
maybe a newb question, not sure though. Lol
Alright so I replaced my old aftermarket radio that came in the car and took out the 6 cd changer out about a year ago. When I did I found this...
![]() ![]() ![]() It was up behind my radio. My question is when I took all that out my factory sub behind the driver seat gets no power. That speaker was blown long before I got the car but I did plug a speaker into it when I had my old radio before and it work. Now if I plug anything in it I get nothing. No power coming to that plug either. I plugged the 9 pin plug-in up like it was but nothing. Does anyone know what that box does? I'm not an audio guy. And that doesn't have anything to do with the sub does anyone know why it might not be working. |
|
|
|
|
|
#2 (permalink) |
|
Gen3 swap DONE!!
|
Alright I just got back inside from messing with it. I got it working. The wire for my antenna and my amp for the sub I'm guess wasn't connected. Its a dark blue one that says amp. power, I just got power to it and everything works great. I do have to have that box hooked up though. Can someone still explain to me what that box is?
|
|
|
|
|
|
#3 (permalink) |
|
Crazy Nasty Honey Badger
Join Date: Aug 2008
Location: New Zealand
Posts: 5,236
Thanks: 24
Thanked 266 Times in 239 Posts
My Google Map iTrader Rating: (1/100% ) |
I googled it and it might be part of an alarm module
yel - battery (fused - value unknown) red - ign wht - (-) trigger pur - (+) trigger grn/org - call a: send to ground for 1.5 seconds to transmit to pager blu/blk - power ant control: goes to 12v when pager transmits blk - ground lt blue - power antenna control (FROM radio) I think what it does is pages you if someone sets off your alarm. I sort of gathered that from this site Coldspeed.net I have no idea how it works though |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|