Water Injection kit.........

Hellstorm · 04-27-2007, 03:16 AM

So i found this kit...........and would like to by it for my Gen3 swapped Mr2.
I read everything i could find on it and im confused about one thing...... Which wires am i plugging into on my ecu? Will this kit work on my car?
Help........please?

HAHA. :P

Here it is:
http://www.aquamist.co.uk/cp/sys2c/sys2c.html

Weasy2k · 04-28-2007, 08:02 PM

you cannot use that unless you have a piggyback or standalone to control the water injection system.

Sang · 04-28-2007, 09:53 PM

^ Yup, IIRC though the Aquamist 1S is compatible with an otherwise stock car since it's activated via pressure switch instead of the ECU.

Hellstorm · 04-29-2007, 02:46 AM

thx guys...thats all i needed to know

Weasy2k · 04-29-2007, 04:50 PM

there is also a very expensive system that has its own ecu...pretty wicked from what i hear, but too much $$$

Look up JOES WATER INJECTION KIT on yahoo and you will find a good kit worth buying!

Sang · 04-29-2007, 07:34 PM

If you're referring to Joe O. his website is

lovehorsepower.com

Weasy2k · 04-30-2007, 12:57 AM

Yes thats it! Thanks!

Hellstorm · 04-30-2007, 01:03 AM

what about the kit KOracing offers? Is that worth purchasing? Im not building a race car or anything....but after blowing my last engine....i would just like a water injection kit to help protect the new Gen3 engine im putting in.

Weasy2k · 04-30-2007, 01:48 AM

I also support the products that KORacing come out with...go for either one!

Sang · 04-30-2007, 02:32 AM

And on that note, Josh sells the cooling mist kit as well, chicoraceworks.com, look under the gallery link for pricing and pics.

Hellstorm · 04-30-2007, 02:00 PM

cool. Thx again guys, i just didnt want to buy something if it was no good.

04-27-2007, 03:16 AM	#1 (permalink)
Hellstorm I Bet I Can Break It. Join Date: Sep 2006 Location: The Woodlands, Texas Posts: 734 Thanks: 12 Thanked 9 Times in 3 Posts iTrader Rating: (7/100% )	Water Injection kit......... So i found this kit...........and would like to by it for my Gen3 swapped Mr2. I read everything i could find on it and im confused about one thing...... Which wires am i plugging into on my ecu? Will this kit work on my car? Help........please? HAHA. :P Here it is: http://www.aquamist.co.uk/cp/sys2c/sys2c.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-28-2007, 08:02 PM	#2 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	you cannot use that unless you have a piggyback or standalone to control the water injection system.

04-28-2007, 09:53 PM	#3 (permalink)
Sang Turtle Join Date: Jul 2006 Location: FL Posts: 4,096 Thanks: 18 Thanked 267 Times in 246 Posts iTrader Rating: (5/100% )	^ Yup, IIRC though the Aquamist 1S is compatible with an otherwise stock car since it's activated via pressure switch instead of the ECU.

04-29-2007, 02:46 AM	#4 (permalink)
Hellstorm I Bet I Can Break It. Join Date: Sep 2006 Location: The Woodlands, Texas Posts: 734 Thanks: 12 Thanked 9 Times in 3 Posts iTrader Rating: (7/100% )	thx guys...thats all i needed to know

04-29-2007, 04:50 PM	#5 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	there is also a very expensive system that has its own ecu...pretty wicked from what i hear, but too much $$$ Look up JOES WATER INJECTION KIT on yahoo and you will find a good kit worth buying!

04-29-2007, 07:34 PM	#6 (permalink)
Sang Turtle Join Date: Jul 2006 Location: FL Posts: 4,096 Thanks: 18 Thanked 267 Times in 246 Posts iTrader Rating: (5/100% )	If you're referring to Joe O. his website is lovehorsepower.com

04-30-2007, 12:57 AM	#7 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	Yes thats it! Thanks!

04-30-2007, 01:03 AM	#8 (permalink)
Hellstorm I Bet I Can Break It. Join Date: Sep 2006 Location: The Woodlands, Texas Posts: 734 Thanks: 12 Thanked 9 Times in 3 Posts iTrader Rating: (7/100% )	what about the kit KOracing offers? Is that worth purchasing? Im not building a race car or anything....but after blowing my last engine....i would just like a water injection kit to help protect the new Gen3 engine im putting in.

04-30-2007, 01:48 AM	#9 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	I also support the products that KORacing come out with...go for either one!

04-30-2007, 02:32 AM	#10 (permalink)
Sang Turtle Join Date: Jul 2006 Location: FL Posts: 4,096 Thanks: 18 Thanked 267 Times in 246 Posts iTrader Rating: (5/100% )	And on that note, Josh sells the cooling mist kit as well, chicoraceworks.com, look under the gallery link for pricing and pics.

04-30-2007, 02:00 PM	#11 (permalink)
Hellstorm I Bet I Can Break It. Join Date: Sep 2006 Location: The Woodlands, Texas Posts: 734 Thanks: 12 Thanked 9 Times in 3 Posts iTrader Rating: (7/100% )	cool. Thx again guys, i just didnt want to buy something if it was no good.