SAFC SETTINGS?

[funkymunky4024]

what setting do i need to put for my safc before i get it tuned like i know 4 cyl..i need like which is the th sensor singal arrow up,down or none.... th-point,Ne-point,dec-air,i know the sensor typr is flap it says it is fl-2 so do i put 2in 2out.....

This will be big help for me..SO thanks....

[m_r_2]

i need help with the same thing

[arber0214]

I dont remember my settings correctly, but they are self explanatory. The best thing to do is to be driving while setting them, If you will in the wrong setting the car will bog down or you will see some funky things happening. lol. Dont worry it will not do anything to the car, no harm at all. The only things that are tricky to do is the high and the low throttle setting. I know it sucks to do it while driving, but got to do it. Unless you have a friend that will make the changes while you drive. If i remember correctly it doesn't make a difference if you set it to 2 or 4 wire.

[m_r_2]

thanks for the info. anyone else? the more info the better

[arber0214]

Set all the levels at 0. That will be your staring point. Have throttle response at 20%, Thats what high throttle means. The car will be treated as if full throttle at 20% of the throttle. The low i believe it should be at 10 %. I will keep plugging in as i remember things, keep posting more info of what you are doing and what is happening. I might remember more. I asked here about 1 year ago about how to set it and nobody replied at all. So keep the levels as a secret, that is your tuning actually. lol

[m_r_2]

i dont want the levels lol im going to have it tuned on a dyno once the weather clears up i just want to set the sensors. i dont i know if you understand what im asking for im not trying to copy someones tune or anything like that. i just want the sensor levels lol

[arber0214]

be more specific about the levels. Write them as they are on the unit. I could care less about the levels, i would tell you if i remembered. I messed with mine for 6 months until i got it right. ( your first post really confused the poop out of me) lol.

[m_r_2]

this is what im trying to set
sensor type:
1. hot-wire
2. flap
3. pressure
4. karmen

[arber0214]

What are the other options? The hot wire setting really doesent make a difference. 2 flap is fine. 3 Pressure is for the boost, so just match it with what you have. 4 Karmen i never did anything with it ( that i remember at least) What settings/ options does it have. numbers? high, low?

[m_r_2]

12 psi of boost so pressure at 12? and flap is at 2? they are the only for options on that screen