Will a SAFC 2 Be enough?

DrPaine · 12-15-2005, 02:05 PM

Weasy, you'll probably be able to answer this. Im just taking a look at for future reference. When tax returns come back i will be sending in my fuel rail to get bored by ATS, buying a new FPR and a CT27 from aaron aswell. With the bored fuel rail I should see 600cc from the injectors.

Right now my mod's are 550cc injectors, Walbro fuel pump, Apexi Intake, Fujitsubo 3 1/4" exhaust, Workspower DP, ECU with Fuel Cut removed, TurboXS RFL BOV, Nology Wires, Yellow Top Battery...

Will be buying next week - NGK BKR7E's

Would an SAFC 2 be sufficient for Tuning for a few months or do u just suggest I get a Rom Tune or piggy back right away?

Weasy2k · 12-16-2005, 02:15 AM

I would just got for there 550 rom tune if your going to stick to that power level....

The only way i would say it sok to use the s-afc is if you use it with a FPR as you mentioned, just because youw ant to limit how much fuel you pull pack (to lean out hte mixture).

If you really want something to go furthur look for a piggyback that can retard and advance timing as well as control fuel....SMT series do that as well as the greddy emanage and split second FTC (only retard).

again if you just wanted to stick with the 27 i would go with the rom tune for sure...

Justin311 · 01-07-2006, 08:21 PM

ROM TUNE!! Think of an SAFC as tuning half your motor, and hoping the other half doesn't blow up.

DrPaine · 01-08-2006, 06:55 PM

Quote:

Originally Posted by Justin311

ROM TUNE!! Think of an SAFC as tuning half your motor, and hoping the other half doesn't blow up.

I know, I was just being cheap. So much to do and so much money to spend. I guess the best parts are alwasy the most expensive. ******* Supply and Demand.

Weasy2k · 01-09-2006, 08:08 PM

well its also about lookinga roudn for the best bang for your buck...thats what i do for my company....i rather sell things that are good yet dont cost an arm and a leg...

Enthalpy · 02-01-2006, 11:49 AM

Woo hoo! We can drop F-bombs?? This board kicks ass!

I agree with the people here. The SAFC is a fantastic way to blow your engine. Then, it will cost you MUCH more than a ROM tune or stand-alone would have ever cost!

Weasy2k · 02-21-2006, 03:48 AM

haha i jsut read your post enthalpy hehheh yea its a great forum!

Now write some standalone reviews!

:P j/k

no srlsy do it....

Enthalpy · 02-21-2006, 11:11 AM

I can write my thoughts of the various standalones I have dealt with, sure. Where would I do that?

*debates with self if I should drop F-bombs in the reviews*

Weasy2k · 02-21-2006, 01:14 PM

do it here in the EFI section...standalone section

I am working on a couple myself

Enthalpy · 02-27-2006, 02:13 AM

I will write up one for the Nemesis, AEM EMS, and Autronic SMC, 2 and 4, unless you already have something in the works. I'll just add to yours, unless you don't want me doing that.

Sirc · 02-27-2006, 07:43 AM

Simple answer: No.

Weasy2k · 02-27-2006, 12:48 PM

Quote:

Originally Posted by Enthalpy

I will write up one for the Nemesis, AEM EMS, and Autronic SMC, 2 and 4, unless you already have something in the works. I'll just add to yours, unless you don't want me doing that.

Go for it...i have used nemesis once and worked with AEM a couple times. My main focus will be Perfect Power products as I have been working with them for a couple years.
If you want to add to anything i make just let me know!

12-15-2005, 02:05 PM	#1 (permalink)
DrPaine Boost Whore! Join Date: Oct 2005 Location: Hershey, PA Posts: 319 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	Will a SAFC 2 Be enough? Weasy, you'll probably be able to answer this. Im just taking a look at for future reference. When tax returns come back i will be sending in my fuel rail to get bored by ATS, buying a new FPR and a CT27 from aaron aswell. With the bored fuel rail I should see 600cc from the injectors. Right now my mod's are 550cc injectors, Walbro fuel pump, Apexi Intake, Fujitsubo 3 1/4" exhaust, Workspower DP, ECU with Fuel Cut removed, TurboXS RFL BOV, Nology Wires, Yellow Top Battery... Will be buying next week - NGK BKR7E's Would an SAFC 2 be sufficient for Tuning for a few months or do u just suggest I get a Rom Tune or piggy back right away?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-16-2005, 02:15 AM	#2 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	I would just got for there 550 rom tune if your going to stick to that power level.... The only way i would say it sok to use the s-afc is if you use it with a FPR as you mentioned, just because youw ant to limit how much fuel you pull pack (to lean out hte mixture). If you really want something to go furthur look for a piggyback that can retard and advance timing as well as control fuel....SMT series do that as well as the greddy emanage and split second FTC (only retard). again if you just wanted to stick with the 27 i would go with the rom tune for sure...

01-07-2006, 08:21 PM	#3 (permalink)
Justin311 No Skills Join Date: Feb 2005 Posts: 151 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	ROM TUNE!! Think of an SAFC as tuning half your motor, and hoping the other half doesn't blow up.

01-09-2006, 08:08 PM	#5 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	well its also about lookinga roudn for the best bang for your buck...thats what i do for my company....i rather sell things that are good yet dont cost an arm and a leg...

02-01-2006, 11:49 AM	#6 (permalink)
Enthalpy EMS Harmonizer Join Date: Feb 2006 Location: Denver, CO Posts: 1,226 Thanks: 8 Thanked 55 Times in 43 Posts My Google Map iTrader Rating: (2/100% )	Woo hoo! We can drop F-bombs?? This board kicks ass! I agree with the people here. The SAFC is a fantastic way to blow your engine. Then, it will cost you MUCH more than a ROM tune or stand-alone would have ever cost!

02-21-2006, 03:48 AM	#7 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	haha i jsut read your post enthalpy hehheh yea its a great forum! Now write some standalone reviews! :P j/k no srlsy do it....

02-21-2006, 11:11 AM	#8 (permalink)
Enthalpy EMS Harmonizer Join Date: Feb 2006 Location: Denver, CO Posts: 1,226 Thanks: 8 Thanked 55 Times in 43 Posts My Google Map iTrader Rating: (2/100% )	I can write my thoughts of the various standalones I have dealt with, sure. Where would I do that? debates with self if I should drop F-bombs in the reviews

02-21-2006, 01:14 PM	#9 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	do it here in the EFI section...standalone section I am working on a couple myself

02-27-2006, 02:13 AM	#10 (permalink)
Enthalpy EMS Harmonizer Join Date: Feb 2006 Location: Denver, CO Posts: 1,226 Thanks: 8 Thanked 55 Times in 43 Posts My Google Map iTrader Rating: (2/100% )	I will write up one for the Nemesis, AEM EMS, and Autronic SMC, 2 and 4, unless you already have something in the works. I'll just add to yours, unless you don't want me doing that.

02-27-2006, 07:43 AM	#11 (permalink)
Sirc Registered User Join Date: Feb 2005 Posts: 1,965 Thanks: 6 Thanked 8 Times in 5 Posts iTrader Rating: (1/100% )	Simple answer: No.