Bright-Lite HID Kit Try out

[steven0720]

Wanna see better at Night? Stock Light bulb is not bright enough for you? Let HID-Xenon conversion kit help you!

This group buy is for the Bright-Lite HID kit

Price:
FOR the Most MR2 Owner
H4 Hi/Lo beam HID for $225 shipped instead of 325 shipped (Low beam HID bulb with Hi beam regular Xenon looking bulb)

$245 for most Single Beam (9005, 9006, H1, H3, H7, H11, 880 .etc)

$325 for most Dual Beam (9007, H4, 9003)


GB price: if we can get 10 kits or more will be $210 shipped for most single beam and H4 Hi/Lo beam HID

Color Temp Available

3000K Gold Yellow Temp, Great for Fog light
4300K The most OEM HID Temp
5000K Bright White
6500K Bright white with slightly blue
8000K Deep Blue (Looks good but less useful output) Not Recommend
10000K Purple Blue (useless output but looks awesome) Not Recommend

This HID required No cutting and re-wiring required for entire installation.

35W. Xenon Gas Filled HID bulbs. No Filament

Easy to installation (20 minutes for a beginner)

CE Approved

Accept Payment: Paypal, money order, cashier check , maybe cash (i need talk to Mark about this)

1 Full Year Warranty
Note :
HID-Xenon Conversion Kit are for off-road driving, we do not held any responsibilities if its used on daily driving.







Please send me an E-mail @ Black_gt45@hotmail.com for order. Thank you so much

[NIXmx]

By hi/low beam do you mean normal and 'brights' with one bulb? Didn't know HIDs could do that.

[accordtec]

Originally Posted by NIXmx

By hi/low beam do you mean normal and 'brights' with one bulb? Didn't know HIDs could do that.

I believe the hi/lo H4 bulbs look similar to these:
http://cgi.ebay.com/ebaymotors/HID-X...spagenameZWDVW

Not to be confused with bi-xenons where the solenoids/mechanical switch directs the light for low and high beam usage from a single bulb, the low beams appear to be a hid bulb while high beams are regular "xenon" bulbs.

[steven0720]

Originally Posted by accordtec

I believe the hi/lo H4 bulbs look similar to these:
http://cgi.ebay.com/ebaymotors/HID-X...spagenameZWDVW

Not to be confused with bi-xenons where the solenoids/mechanical switch directs the light for low and high beam usage from a single bulb, the low beams appear to be a hid bulb while high beams are regular "xenon" bulbs.

thanks for the answer, yes, that's exactly what i mean for Low beam HID bulb and high beams are regular " XENON bulbs"

[accordtec]

Hmm...may consider picking one of these kits up when I have some funds available. How does the Bright-Lite brand stack up, quality wise?

[steven0720]

Originally Posted by accordtec

Hmm...may consider picking one of these kits up when I have some funds available. How does the Bright-Lite brand stack up, quality wise?

i gave 9 out of 10, i love the way how slim the ballast is, it helps a lots for some tight engine bay.it comes 1 year warranty with no question ask as long as you don't do some phyical damage to it. i have it in my MR2, NSX, my g/f's Accord and all my friends have it as well. one of my buddy just put 3 sets of 6000K HID in his high,low and fog of his 07 avalanche. they looks AWSOME

if you would like i can hook you up with a test drive deal, but i would need you write up a review for everyone here though. if it sounds good to you shoot me a pm.

[Just Wong It]

whoa those look sswwwwweeeeeettt but what housing would we use tho ?? the cheap ebay housing? is there any other housing?

[steven0720]

Originally Posted by Just Wong It

whoa those look sswwwwweeeeeettt but what housing would we use tho ?? the cheap ebay housing? is there any other housing?

stock housing should be fine, but if you can get the Projector housing would be better. i used the ebay h4 Projector like housing, it came out okay, it doesn't gives exactly clean cut like the S2000 or TSX projector however, it defin. better than the stock housing. Anyone can help me out here??

[Tommy1223]

i have the h4 hell conversion, but i'm just scared that there will be too much glare in it. Does anyone have HID's in their h4 conversions yet?

[Just Wong It]

http://www.mr2board.com/forums/mk-2-...5-shipped.html
those kinda housing?

[airbornesquelch]

I'm really interested in your lights, what's this "test drive" you so spoke of?

[steven0720]

Originally Posted by airbornesquelch

I'm really interested in your lights, what's this "test drive" you so spoke of?

LOL "test drive" is the name i called for people who willing to buy a product but not sure about the quality and price. So, i offer cheaper price for you to test it out but would need to write a review and take some pics.

[airbornesquelch]

Well I'd love to do alittle investigating of your product, I'm always in the mood for somethng new, I'll even do a write-up with pictures on the complete install, product review, and proformance. Hit me up PM style..well talk turkey.

[steven0720]

Originally Posted by airbornesquelch

Well I'd love to do alittle investigating of your product, I'm always in the mood for somethng new, I'll even do a write-up with pictures on the complete install, product review, and proformance. Hit me up PM style..well talk turkey.

PM sent

[steven0720]

yes, the try out spot still open for one of MR2 Member here ~~~

[Kurdain]

Sent you a PM about HIDs in non-HID housings.

[steven0720]

pm sent back

[steven0720]

bump

[steven0720]

more HIDs in stock

[steven0720]

update:
I got a set of those H4 Projector looking housing, along with the HID kit in there, it does improve the output of the light (better than stock), but didn't give the awsome cut-off line which Real projector have.