MR2 OEM Cup Holder

Kurdain · 10-21-2007, 05:01 AM

All,
I can get OEM cup holders for the MR2.
They are black and in the same texture as the dash.
It is a double cup holder, 1/2 DIN in size.

I've sold a few of these and they fit perfect, it is OEM so they should.

They actually hold larger cups as well, unlike some JDM ones that have troubles holding anything larger than a 12-ounce can.

Turn around time on this is about 2 weeks, about a week to get them after the order is placed and a week to get it to you.
It's much easier for me to order several of these at a time.

Cost is: $80 shipped.

Paypal is red_firebird_78@yahoo.com
If there is enough interest I will place an order on or around November 2nd, but I can order these anytime.
If there is large enough interest, 10+, I will ask about getting a better price from my supplier.

Thanks,

Oteck · 10-22-2007, 12:29 AM

got pics? im interested

fidget · 10-22-2007, 12:52 AM

+1 For pics

Final13 · 10-22-2007, 02:00 AM

gots to have pics...

Kurdain · 10-22-2007, 06:55 AM

I can't take pics.
I can't order a bunch to take pics then end up with stock no one purchases.

It's the OEM toyota dual cup holder, black, 1/2 DIN in size.

It fits well and I haven't had any complaints, its factory OEM, Toyota cup holder.

I'll ask the guy at the dealership that I purchase through to take pics but I am sure he won't be able too and I can't afford to drive 850 miles to take a pic.

I'll see what I can do however.

Final13 · 10-22-2007, 07:06 AM

I assume they are black?

Kurdain · 10-22-2007, 07:50 AM

Quote:

Originally Posted by Kurdain

I can't take pics.
I can't order a bunch to take pics then end up with stock no one purchases.

It's the OEM toyota dual cup holder, black, 1/2 DIN in size.

It fits well and I haven't had any complaints, its factory OEM, Toyota cup holder.

I'll ask the guy at the dealership that I purchase through to take pics but I am sure he won't be able too and I can't afford to drive 850 miles to take a pic.

I'll see what I can do however.

Yes, Black.

canadam · 10-22-2007, 09:39 AM

The MR2 cupholder took up a full DIN pocket, did it not? What car is this piece from, and are you offering a filler for the 1/2 DIN slot left open?

Quote:

Originally Posted by Kurdain

I can't take pics.
I can't order a bunch to take pics then end up with stock no one purchases.

It's the OEM toyota dual cup holder, black, 1/2 DIN in size.

It fits well and I haven't had any complaints, its factory OEM, Toyota cup holder.

I'll ask the guy at the dealership that I purchase through to take pics but I am sure he won't be able too and I can't afford to drive 850 miles to take a pic.

I'll see what I can do however.

Kurdain · 10-26-2007, 04:02 AM

Quote:

Originally Posted by canadam

The MR2 cupholder took up a full DIN pocket, did it not? What car is this piece from, and are you offering a filler for the 1/2 DIN slot left open?

I am 99.999% sure its a 1/2 din unit, I will verify.
I dunno what the JDM OEM version was and I am not offering anything to fill in the open spot. That's a good idea though, I'll look into offering that as well in the future if I can get a decent price.

Everyone that I have sold these too has filled in the open spaces with a 1/4 DIN turbo timer and 1/4 DIN boost controller.

PearlJammzz · 10-26-2007, 09:16 AM

Ya Jeremy, pics would be nice so we know which one you are talking about

Kurdain · 11-02-2007, 07:48 AM

As I said the cupholder is a 1/2 DIN item.
It's Black, but I can get Tan and Grey if you want.

I can also order a 1/2 DIN blank, in black only, for an extra $20 shipped, but typically people have an EBC and TT in the empty slot.

I do not have pictures, it's black, holds 2 drinks, slides in and out like other holders, 1/2 DIN, matches the MR2 plastic.....if I had one in stock I would take a pic.

I'm not sure what else to say.

canadam · 11-02-2007, 09:13 AM

It most likely looks like this:

You can see the cup holder under the little storage compartment over the shifter.

Kurdain · 11-02-2007, 05:58 PM

Quote:

Originally Posted by canadam

It most likely looks like this:

http://avtodiagnostika.ru/content/ca...0-interior.jpg

You can see the cup holder under the little storage compartment over the shifter.

Yes it's a 1/2 DIN just like that, but the blank to fill in the spot is 1/2 DIN as well, not a large storage compartment shown there.

55mr2 · 11-02-2007, 08:36 PM

Is this what we are talking about.

Oteck · 11-02-2007, 08:51 PM

i remember seeing the oem mr2 one being having a curve when its pulled out

55mr2 · 11-02-2007, 08:59 PM

Quote:

Originally Posted by Oteck

i remember seeing the oem mr2 one being having a curve when its pulled out

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

I think the OP is talking about a 1/2 DIN size (which is what mine is) rather than a full 1 DIN (like yours). I would much prefer one like you show cause then I wouldn't need a 1/2 DIN spacer.

Kurdain · 11-02-2007, 09:56 PM

I had no idea a cup holder was going to be such a huge issue.
I've specific color, dimensions, price and functionality.

If you don't like it you can return it (in good condition), I don't know what else I can do?

Bak@EMSPowered · 11-02-2007, 10:06 PM

Quote:

Originally Posted by Kurdain

I had no idea a cup holder was going to be such a huge issue.
I've specific color, dimensions, price and functionality.

If you don't like it you can return it (in good condition), I don't know what else I can do?

Maybe just order a single one to get pics of, and then sell them? It'd definitely clear up a lot of the confusion.

Kurdain · 11-02-2007, 10:22 PM

I've done that with other items for people that 'had money in hand'.
I sat on almost $2000 of product for months.

I'm not trying to be defensive, it's just there's a pic of it here already, I've confirmed the configuration multiple times.

I'm still sitting on a Rev6 kit that was already 'sold', I don't want to keep repeating that and keep losing money that I work hard for. I don't make nearly anything on this anyways and I thought it would be more of a courtesy since so many people want a cupholder in their MR2.

Bak@EMSPowered · 11-02-2007, 10:28 PM

Quote:

Originally Posted by Kurdain

I've done that with other items for people that 'had money in hand'.
I sat on almost $2000 of product for months.

I'm not trying to be defensive, it's just there's a pic of it here already, I've confirmed the configuration multiple times.

I'm still sitting on a Rev6 kit that was already 'sold', I don't want to keep repeating that and keep losing money that I work hard for. I don't make nearly anything on this anyways and I thought it would be more of a courtesy since so many people want a cupholder in their MR2.

Very good point

10-21-2007, 05:01 AM	#1 (permalink)
Kurdain Cage Fighter Join Date: Oct 2006 Posts: 685 Thanks: 39 Thanked 35 Times in 29 Posts iTrader Rating: (9/100% )	MR2 OEM Cup Holder All, I can get OEM cup holders for the MR2. They are black and in the same texture as the dash. It is a double cup holder, 1/2 DIN in size. I've sold a few of these and they fit perfect, it is OEM so they should. They actually hold larger cups as well, unlike some JDM ones that have troubles holding anything larger than a 12-ounce can. Turn around time on this is about 2 weeks, about a week to get them after the order is placed and a week to get it to you. It's much easier for me to order several of these at a time. Cost is: $80 shipped. Paypal is red_firebird_78@yahoo.com If there is enough interest I will place an order on or around November 2nd, but I can order these anytime. If there is large enough interest, 10+, I will ask about getting a better price from my supplier. Thanks,

10-22-2007, 12:29 AM	#2 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	got pics? im interested __________________ [Oteck's] Project car Garage Pending Projects 1mz/3mz VVTI Hybrid V6 \| LS430 Big Brakes \| Rotary Climate Control \| Power steering Commander \| Power Tilt & Telescopic Steering Column \| Completed Projects Stainless Door Sills \| Power Folding Mirrors \| Motorized/Steering Fog lamps \| Pedal Conversion \| LED Gauges \| Lexus Door Cover \| Sway bar Relocation Tab \| RFID Push Start

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2007, 12:52 AM	#3 (permalink)
fidget No Skills Join Date: Oct 2006 Location: Jacksonville Florida Posts: 251 Thanks: 14 Thanked 8 Times in 8 Posts iTrader Rating: (1/100% )	+1 For pics

10-22-2007, 02:00 AM	#4 (permalink)
Final13 Cage Fighter Join Date: Nov 2006 Location: Tennessee Posts: 383 Thanks: 6 Thanked 9 Times in 9 Posts iTrader Rating: (0/0% )	gots to have pics...

10-22-2007, 06:55 AM	#5 (permalink)
Kurdain Cage Fighter Join Date: Oct 2006 Posts: 685 Thanks: 39 Thanked 35 Times in 29 Posts iTrader Rating: (9/100% )	I can't take pics. I can't order a bunch to take pics then end up with stock no one purchases. It's the OEM toyota dual cup holder, black, 1/2 DIN in size. It fits well and I haven't had any complaints, its factory OEM, Toyota cup holder. I'll ask the guy at the dealership that I purchase through to take pics but I am sure he won't be able too and I can't afford to drive 850 miles to take a pic. I'll see what I can do however.

10-22-2007, 07:06 AM	#6 (permalink)
Final13 Cage Fighter Join Date: Nov 2006 Location: Tennessee Posts: 383 Thanks: 6 Thanked 9 Times in 9 Posts iTrader Rating: (0/0% )	I assume they are black?

10-26-2007, 09:16 AM	#10 (permalink)
PearlJammzz Cage Fighter Join Date: Feb 2006 Posts: 2,115 Thanks: 9 Thanked 74 Times in 69 Posts My Google Map iTrader Rating: (7/100% )	Ya Jeremy, pics would be nice so we know which one you are talking about

11-02-2007, 07:48 AM	#11 (permalink)
Kurdain Cage Fighter Join Date: Oct 2006 Posts: 685 Thanks: 39 Thanked 35 Times in 29 Posts iTrader Rating: (9/100% )	As I said the cupholder is a *1/2 DIN* item. It's Black, but I can get Tan and Grey if you want. I can also order a 1/2 DIN blank, in black only, for an extra $20 shipped, but typically people have an EBC and TT in the empty slot. I do not have pictures, it's black, holds 2 drinks, slides in and out like other holders, 1/2 DIN, matches the MR2 plastic.....if I had one in stock I would take a pic. I'm not sure what else to say.

11-02-2007, 09:13 AM	#12 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 10,399 Thanks: 120 Thanked 142 Times in 121 Posts My Google Map iTrader Rating: (34/100% )	It most likely looks like this: You can see the cup holder under the little storage compartment over the shifter.

11-02-2007, 08:36 PM	#14 (permalink)
55mr2 2Old2Give2Hoots Join Date: Jul 2007 Location: Winnipeg Posts: 351 Thanks: 10 Thanked 30 Times in 24 Posts My Google Map iTrader Rating: (3/100% )	Is this what we are talking about.

11-02-2007, 08:51 PM	#15 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	i remember seeing the oem mr2 one being having a curve when its pulled out

11-02-2007, 09:56 PM	#17 (permalink)
Kurdain Cage Fighter Join Date: Oct 2006 Posts: 685 Thanks: 39 Thanked 35 Times in 29 Posts iTrader Rating: (9/100% )	I had no idea a cup holder was going to be such a huge issue. I've specific color, dimensions, price and functionality. If you don't like it you can return it (in good condition), I don't know what else I can do?

11-02-2007, 10:22 PM	#19 (permalink)
Kurdain Cage Fighter Join Date: Oct 2006 Posts: 685 Thanks: 39 Thanked 35 Times in 29 Posts iTrader Rating: (9/100% )	I've done that with other items for people that 'had money in hand'. I sat on almost $2000 of product for months. I'm not trying to be defensive, it's just there's a pic of it here already, I've confirmed the configuration multiple times. I'm still sitting on a Rev6 kit that was already 'sold', I don't want to keep repeating that and keep losing money that I work hard for. I don't make nearly anything on this anyways and I thought it would be more of a courtesy since so many people want a cupholder in their MR2.