GB: A2W Pump (introductory sale)

Bak@EMSPowered · 10-21-2007, 11:01 PM

As some of you know for the last 2-3 months We've been in search of a couple of key things to add to our line of A2W intercooler items.

One of the main things I've been in the search of is a high volume pump to add to our list of items for the guys shooting for higher horsepower than what the Bosch (aka Ford Racing / Mercedes) pump will handle. There are a few pumps available on the market which are specifically designed for coolant and are high output, but most are fairly expensive ($300-500). There are also other pumps that are high output, but are designed to use with water, not coolant, which many people use (these are cheaper but are not designed for use with coolant and eventually break down). Some high volume pumps pull way too much amps and stress your electrical system. And lastly, most of the higher volume pumps are extremely large and difficult to fit in tight spaces.

So the good news. We are now carrying a new high volume pump that was specifically engineered for A2W applications.

* It is a high volume pump (approximately 20gpm, the engineer tells me actual flow rate should be closer to 23gpm)
* It is designed specifically for use with coolant so the seals/pump/impeller will not break down over extended use with alcohol based coolant
* It is not big, comes in a fairly small form factor and is easy to mount in tight spaces
* Only pulls 6A of power which will not stress your electrical system

This is an introductory sale on these pumps. The pump will sell at a regular price of $199 after this sale is over. During this group buy the price is $149.

This group buy will be close on November 4th, 2007. All purchases through this GB will shipped on or before November 9th, 2007.

To place your order go to the following link, you can pay with credit card or paypal:
High Performance A2W Pump - $199.00 : EMSPowered, High Quality, Great Service, Low Prices

These pumps are custom made just for EMSPowered. You will not find this pump anywhere else. Out of all of our new products offerings, this is the one that I am most excited about. This pump will, in my opinion, be the new pump used by the majority of MR2 owners going with an A2W setup. The inlet is 1" NPT, the outlet is -12 AN o-ring boss.

We have the test results back. This graph shows the pump's performance at 12V. Most MR2's output around 13-14.5V during normal operation. At 13V the maximum output will be approximately 22.75gpm. At 14V the output of the pump will be approximately 24.5gpm.

The pictures speak for themselves.

Bak@EMSPowered · 10-22-2007, 07:27 PM

We have the test results back. This graph shows the pump's performance at 12V. Most MR2's output around 13-14.5V during normal operation. At 13V the maximum output will be approximately 22.75gpm. At 14V the output of the pump will be approximately 24.5gpm.

Bak@EMSPowered · 10-27-2007, 01:42 AM

Anyone else need a high flow pump for your A2W setup?

Bak@EMSPowered · 10-29-2007, 08:24 PM

Just a few days left!

Bak@EMSPowered · 11-02-2007, 05:42 PM

Just 2 days left!

Bak@EMSPowered · 11-04-2007, 08:17 PM

If you need a pump for your A2W setup get your orders in tonight!!

This group buy ends tonight!

10-21-2007, 11:01 PM	#1 (permalink)
Bak@EMSPowered Banned Seller Join Date: Oct 2005 Location: Austin, TX Posts: 5,925 Thanks: 30 Thanked 193 Times in 165 Posts My Google Map iTrader Rating: (49/93% )	GB: A2W Pump (introductory sale) As some of you know for the last 2-3 months We've been in search of a couple of key things to add to our line of A2W intercooler items. One of the main things I've been in the search of is a high volume pump to add to our list of items for the guys shooting for higher horsepower than what the Bosch (aka Ford Racing / Mercedes) pump will handle. There are a few pumps available on the market which are specifically designed for coolant and are high output, but most are fairly expensive ($300-500). There are also other pumps that are high output, but are designed to use with water, not coolant, which many people use (these are cheaper but are not designed for use with coolant and eventually break down). Some high volume pumps pull way too much amps and stress your electrical system. And lastly, most of the higher volume pumps are extremely large and difficult to fit in tight spaces. So the good news. We are now carrying a new high volume pump that was specifically engineered for A2W applications. * It is a high volume pump (approximately 20gpm, the engineer tells me actual flow rate should be closer to 23gpm) * It is designed specifically for use with coolant so the seals/pump/impeller will not break down over extended use with alcohol based coolant * It is not big, comes in a fairly small form factor and is easy to mount in tight spaces * Only pulls 6A of power which will not stress your electrical system This is an introductory sale on these pumps. The pump will sell at a regular price of $199 after this sale is over. During this group buy the price is $149. This group buy will be close on November 4th, 2007. All purchases through this GB will shipped on or before November 9th, 2007. To place your order go to the following link, you can pay with credit card or paypal: High Performance A2W Pump - $199.00 : EMSPowered, High Quality, Great Service, Low Prices These pumps are custom made just for EMSPowered. You will not find this pump anywhere else. Out of all of our new products offerings, this is the one that I am most excited about. This pump will, in my opinion, be the new pump used by the majority of MR2 owners going with an A2W setup. The inlet is 1" NPT, the outlet is -12 AN o-ring boss. We have the test results back. This graph shows the pump's performance at 12V. Most MR2's output around 13-14.5V during normal operation. At 13V the maximum output will be approximately 22.75gpm. At 14V the output of the pump will be approximately 24.5gpm. The pictures speak for themselves. Last edited by Bak@EMSPowered; 10-22-2007 at 09:54 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2007, 07:27 PM	#2 (permalink)
Bak@EMSPowered Banned Seller Join Date: Oct 2005 Location: Austin, TX Posts: 5,925 Thanks: 30 Thanked 193 Times in 165 Posts My Google Map iTrader Rating: (49/93% )	We have the test results back. This graph shows the pump's performance at 12V. Most MR2's output around 13-14.5V during normal operation. At 13V the maximum output will be approximately 22.75gpm. At 14V the output of the pump will be approximately 24.5gpm.

10-27-2007, 01:42 AM	#3 (permalink)
Bak@EMSPowered Banned Seller Join Date: Oct 2005 Location: Austin, TX Posts: 5,925 Thanks: 30 Thanked 193 Times in 165 Posts My Google Map iTrader Rating: (49/93% )	Anyone else need a high flow pump for your A2W setup?

10-29-2007, 08:24 PM	#4 (permalink)
Bak@EMSPowered Banned Seller Join Date: Oct 2005 Location: Austin, TX Posts: 5,925 Thanks: 30 Thanked 193 Times in 165 Posts My Google Map iTrader Rating: (49/93% )	Just a few days left!

11-02-2007, 05:42 PM	#5 (permalink)
Bak@EMSPowered Banned Seller Join Date: Oct 2005 Location: Austin, TX Posts: 5,925 Thanks: 30 Thanked 193 Times in 165 Posts My Google Map iTrader Rating: (49/93% )	Just 2 days left!

11-04-2007, 08:17 PM	#6 (permalink)
Bak@EMSPowered Banned Seller Join Date: Oct 2005 Location: Austin, TX Posts: 5,925 Thanks: 30 Thanked 193 Times in 165 Posts My Google Map iTrader Rating: (49/93% )	If you need a pump for your A2W setup get your orders in tonight!! This group buy ends tonight!