GB: S2S Custom Fuel hardline replacement. MKI & MKII

kameleon · 05-05-2008, 11:51 AM

We are proud to roll out our new fuel tank to filter replacement line. If you have a MKII chances are your line is about to rust through. And if you have a MKI your stock rubber line is very old and could stand a replacement. Either one you own is not going to be very happy if you try to run E85 due to the rubber portions of it.

The S2S tank hardline to filter replacement line is made out of our -6 stainless steel braided teflon lined hose. As always our ends are crimped on to allow superior sealing over hand screwed-on fittings. What really goes above and beyond any other replacement line is the tank hardline adapter. While others just think a -6AN fitting will work, we actually did research and made a custom fitting to seal properly to the hardline. As you can see below there is no way that the 2 concave flares can seal properly. So we designed a fitting that does not need any o-rings or hope-and-a-prayer to seal properly.

The -6AN and the stock tank hardline:

The stock fittings. MKII top, MKI bottom:

Our custom made fitting:

*a longer writeup and larger pics can be found here

The groupbuy will be open for 1 week unless we all agree to end it early or extend it. The price for the line in this groupbuy is as follows:

MKI: 74.99
MKII: 79.99

We are also allowing you to use our anniversary coupon code for 10% off. Details in my signature.

*edit*
No more waiting... The fittings will be in stock or around Monday May 12th. Order now and we will ship as soon as they come in.

And as always if you have any questions you can post here or Contact US

kameleon · 05-06-2008, 11:15 AM

Once paid please post here or email us.

No more pre-order needed! We will have the fittings in stock by Monday May 12 according to the machinist. Don't wait, order now and we will ship as soon as they come in!

If you have already ordered expect your order to ship on or around the 13th. You will be notified via email once it ships.

Thank you all for your support!!!

kameleon · 05-08-2008, 05:09 PM

Update: These lines will be in stock on or around May 12. Order yours now and we will ship as soon as the fittings come in from the machinist.

kameleon · 05-15-2008, 04:22 PM

Anyone else want in on this. Order today before midnight CST with our anniversary sale code and get the 10% off with our anniversary sale!

kameleon · 05-20-2008, 01:23 PM

Just picked up the fittings from the machinist. All orders will be shipped this afternoon. Any new orders will ship when payment is received.

kameleon · 05-21-2008, 10:21 AM

We have plenty in stock. Place any order between now and the 31st and still receive the 5% GC back from our Anniversary Sale!

SteveAW11 · 05-22-2008, 01:00 AM

hmm and we were talking about this a while back. I was the one who asked you about a line only, as I had the correct fitting from another that was made up by the guy on the MR2oc.
Gonna have to invest in this soon to match your FF to rail line

kameleon · 05-22-2008, 07:54 AM

We definitely have plenty in stock. Just let me know. I can do a line only if you need it. I will have to go review my emails to refresh my memory on our conversation though. lol

05-05-2008, 11:51 AM	#1 (permalink)
kameleon Side 2 Side Racing Inc. Join Date: Jan 2006 Location: Jackson, MS Posts: 283 Thanks: 1 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (2/100% )	GB: S2S Custom Fuel hardline replacement. MKI & MKII We are proud to roll out our new fuel tank to filter replacement line. If you have a MKII chances are your line is about to rust through. And if you have a MKI your stock rubber line is very old and could stand a replacement. Either one you own is not going to be very happy if you try to run E85 due to the rubber portions of it. The S2S tank hardline to filter replacement line is made out of our -6 stainless steel braided teflon lined hose. As always our ends are crimped on to allow superior sealing over hand screwed-on fittings. What really goes above and beyond any other replacement line is the tank hardline adapter. While others just think a -6AN fitting will work, we actually did research and made a custom fitting to seal properly to the hardline. As you can see below there is no way that the 2 concave flares can seal properly. So we designed a fitting that does not need any o-rings or hope-and-a-prayer to seal properly. The -6AN and the stock tank hardline: The stock fittings. MKII top, MKI bottom: Our custom made fitting: a longer writeup and larger pics can be found here The groupbuy will be open for 1 week unless we all agree to end it early or extend it. The price for the line in this groupbuy is as follows: MKI: 74.99 MKII: 79.99 We are also allowing you to use our anniversary coupon code for 10% off. Details in my signature. edit* No more waiting... The fittings will be in stock or around Monday May 12th. Order now and we will ship as soon as they come in. And as always if you have any questions you can post here or Contact US Last edited by kameleon; 05-08-2008 at 04:28 PM..

05-06-2008, 11:15 AM	#2 (permalink)
kameleon Side 2 Side Racing Inc. Join Date: Jan 2006 Location: Jackson, MS Posts: 283 Thanks: 1 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (2/100% )	Once paid please post here or email us. No more pre-order needed! We will have the fittings in stock by Monday May 12 according to the machinist. Don't wait, order now and we will ship as soon as they come in! If you have already ordered expect your order to ship on or around the 13th. You will be notified via email once it ships. Thank you all for your support!!! Last edited by kameleon; 05-08-2008 at 04:30 PM..

05-15-2008, 04:22 PM	#4 (permalink)
kameleon Side 2 Side Racing Inc. Join Date: Jan 2006 Location: Jackson, MS Posts: 283 Thanks: 1 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (2/100% )	Anyone else want in on this. Order today before midnight CST with our anniversary sale code and get the 10% off with our anniversary sale! Last edited by kameleon; 05-15-2008 at 10:06 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-08-2008, 05:09 PM	#3 (permalink)
kameleon Side 2 Side Racing Inc. Join Date: Jan 2006 Location: Jackson, MS Posts: 283 Thanks: 1 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (2/100% )	Update: These lines will be in stock on or around May 12. Order yours now and we will ship as soon as the fittings come in from the machinist.

05-20-2008, 01:23 PM	#5 (permalink)
kameleon Side 2 Side Racing Inc. Join Date: Jan 2006 Location: Jackson, MS Posts: 283 Thanks: 1 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (2/100% )	Just picked up the fittings from the machinist. All orders will be shipped this afternoon. Any new orders will ship when payment is received.

05-21-2008, 10:21 AM	#6 (permalink)
kameleon Side 2 Side Racing Inc. Join Date: Jan 2006 Location: Jackson, MS Posts: 283 Thanks: 1 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (2/100% )	We have plenty in stock. Place any order between now and the 31st and still receive the 5% GC back from our Anniversary Sale!

05-22-2008, 01:00 AM	#7 (permalink)
SteveAW11 Cage Fighter Join Date: Jan 2008 Posts: 131 Thanks: 1 Thanked 10 Times in 9 Posts iTrader Rating: (1/100% )	hmm and we were talking about this a while back. I was the one who asked you about a line only, as I had the correct fitting from another that was made up by the guy on the MR2oc. Gonna have to invest in this soon to match your FF to rail line

05-22-2008, 07:54 AM	#8 (permalink)
kameleon Side 2 Side Racing Inc. Join Date: Jan 2006 Location: Jackson, MS Posts: 283 Thanks: 1 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (2/100% )	We definitely have plenty in stock. Just let me know. I can do a line only if you need it. I will have to go review my emails to refresh my memory on our conversation though. lol