GB: Custom Gauges

[Bak@EMSPowered]

EDIT July 24th: These are almost ready to ship. All of the pc boards are in and they're working on assembly and testing. These should be shipping around Monday. So get your orders in!! Because as soon as they get here, this introductory sale price will be over.


We finally got the green units designed for you guys and are treating all of you to a deeply discounted pre-sale for the first batch. These will ship approximately around July 25th (maybe sooner).

This sale includes a few different gauges, please read below. These are all a direct replacement for the OEM/stock volt/boost gauge in the 1990-1999 Toyota MR2. These will work in USDM, JDM, and Euro spec gauge clusters in both left hand drive and right hand drive vehicles.

The quantities are limited, so please place your order soon. The last pre-sale for the red/blue ones we completely sold out within a few days.

Place your orders here:
CLICK HERE TO PLACE YOUR ORDER


New Gauge #1

This gauge is great for just about any MR2. Whether you're V6, V8, 5sfe, 3sgte, or any other setup. Oil pressure is always important to monitor. Now with this new gauge you can not only monitor your oil pressures but you can also set custom warnings to let you know when your oil pressure is too high or to low.

We include the required fittings to use the stock location for the sending unit. This means there's no need for additional oil filter sandwich plates

EMSPowered Custom Oil Pressure Gauge
(Replaces OEM Boost/Voltage Gauge)

Features & Functions:
Range: 100 PSI
Upper and lower user-selectable alarms with startup delay
User-selectable peak indicator mode
Audible external buzzer for high/low alarm
Park-light dimmer (dims the gauge when parking lights are on)
User-settable day and night brightness intensities (9 levels each)
Comes with fittings to install in either 1/8 npt or 1/8 bspt threads (this means that you can install it in the same spot as the OEM sensor for a very easy installation)

Display color: Blue, Green or Red (choose below)

Sender required: Included

Detailed Installation Instructions:
CLICK HERE

FAQ:
Is this a mechanical gauge?
No, this is an electronic gauge with the pressure sensor mounted in the engine bay. This allows for quick response to pressure changes and the cleanest possible installation.

How long does it take to install?
The installation will take anywhere from 30 to 120 minutes depending on your level of experience.

Does this gauge have a "warning" feature?
Yes, the gauge has various features including both a low and high warning. You can select what pressure the low and high warning engages. When you reach the warning level you will hear an audible warning and the gauge display will also flash.



New Gauge #2

This is for all you guys that kept begging us to make a green boost gauge. Here it is finally.

EMSPowered High Resolution Boost Gauge
(Replaces OEM Boost/Volt Gauge)
Green

Features & Functions:
Range: < -30 in. Hg to > 50 PSI
Resolution: 0.1 PSI, 0.5 PSI, or 1 PSI (user-selectable)
Numeric recall, with user-adjustable peak-display time
Remotely mounted pressure sensor (mounted in engine bay)
Park-light dimmer (dims the gauge when parking lights are on)
User-settable day and night brightness intensities (9 levels each)

Display color: Blue

Sender required: Included

Detailed Installation Instructions:
CLICK HERE

FAQ:
Is this a mechanical gauge?
No, this is an electronic gauge with the pressure sensor mounted in the engine bay. This allows for quick response to pressure changes and the cleanest possible installation.

Do I need anything else to install this?
No, everything needed to install this gauge is included.

How long does it take to install?
The installation will take anywhere from 30 to 120 minutes depending on your level of experience.

Does this gauge have a "peak/hold" feature?
Yes, the gauge has various features including peak/hold

Will my gauge read incorrectly if I change altitude drastically (i.e. driving from the mountains to the beach)?
This gauge has a calibration feature which enables you to calibrate your gauge back to zero at any time. This allows you to always have the most accurate pressure reading possible.


Here are some various pictures:

[Mr2insane]

awsome ...made order for the green just now.

[Bak@EMSPowered]

11 sold.... 39 left.

[toy-driver]

That is SO COOL.

[sleepermr2]

bump for a wicked awesome product!!!! this gauge is awesome!!!

[Bak@EMSPowered]

A couple of vids for you guys that have been asking. Sorry for the horrible quality. In these clips the guage is set to display boost in 0.5 psi increments. You can set it to show in increments of 1psi, 0.5psi, or 0.1psi. It's user selectable.

YouTube - Toyota MR2 Boost Gauge Part 1

and

YouTube - Toyota MR2 Boost Gauge Part 2

[Bak@EMSPowered]

There's still more green gauges available! Get your orders in before this sale price is over. This is a one time only sale for the introduction for these new gauges.

[Bak@EMSPowered]

EDIT July 24th: These are almost ready to ship. All of the pc boards are in and they're working on assembly and testing. These should be shipping around Monday. So get your orders in!! Because as soon as they get here, this introductory sale price will be over.

[Bak@EMSPowered]

Just a few days left for anyone wanting to jump in on the introductory sale price on these.

[Daemonslayer]

iam interessted in Red where is the price??

[Bak@EMSPowered]

Originally Posted by Daemonslayer

iam interessted in Red where is the price??

If you are looking for the red BOOST GAUGE CLICK HERE

If you are looking for the red OIL PRESSURE GAUGE CLICK HERE

[Mr2crazybyong]

baktash, do you have the boost guage in white color lights?

[Bak@EMSPowered]

Originally Posted by Mr2crazybyong

baktash, do you have the boost guage in white color lights?

Only red, blue and green at this time.

[Luni]

Tash, you really should think about making them totally white, and providing colored lenses you can filter the color with so people can make them any color they want.

[Daemonslayer]

Originally Posted by Luni

Tash, you really should think about making them totally white, and providing colored lenses you can filter the color with so people can make them any color they want.

thats a good one!

[Bak@EMSPowered]

Originally Posted by Luni

Tash, you really should think about making them totally white, and providing colored lenses you can filter the color with so people can make them any color they want.

We've been down that road before and the display just ends up kind of ugly. The way the light filters through and also the way the gauge looks when it is turned off is just not good with that sort of a setup.

[Bak@EMSPowered]

All of the blue & red gauges are coming in over the next few days and will ship out accordingly. The green ones were delayed a bit because of a bad batch of LED's that did not test out properly. We are expecting the green ones to be ready to ship in about 2 weeks.

[Bak@EMSPowered]

They are finishing up the assembly tomorrow, and will be starting testing over the weekend. If all goes well, the green gauges should start shipping on Tuesday.

Red and blue gauges are in stock and ready to ship.

[BulitSpongeTWO]

hey i saw these on ebay once b4 and wondered where i could find them again. do you have any blue boost gauges for the center for sale still? and how do i order them? i went to the site and it was only telling me about right side digital readouts. i would love to change the other ones too but i need a fuel gauge

[Bak@EMSPowered]

Originally Posted by BulitSpongeTWO

hey i saw these on ebay once b4 and wondered where i could find them again. do you have any blue boost gauges for the center for sale still? and how do i order them? i went to the site and it was only telling me about right side digital readouts. i would love to change the other ones too but i need a fuel gauge

Good talking to you over IM. Let me know if you have any other questions.